A flexible humidity sensor based on silk fabrics for human respiration monitoring

Development of flexible devices for continuous respiration monitoring has been fueled up recently due to their great importance in constructing wearable healthcare systems. However, there is no report on silk fabric-based devices for precise detection of the human respiratory rate and depth. In this work, a silk fabric-based respiration sensor was fabricated by successive electroless plating of conductive interdigital electrodes and spray-coating of a graphene oxide (GO) sensing layer. Surface morphologies of the devices were characterized to show the construction of the sensor. The uniform surface distribution of GO nanosheets was analysed using the Raman mapping method. After optimization, the as-prepared device could accurately detect the human respiration rate and effectively differentiate normal, deep and fast breathing. The flexibility test indicates that the sensor can tolerate 2500 repetitions of bending and twisting without influencing its performance. Moreover, by designing a spray-coating mask, GO layers with various patterns could be deposited to achieve both functionality and aesthetics. This work not only develops a silk fabric-based sensor for potential application in assessing the basic human health-status, but also provides a facile approach to preparing textile-based wearable electronic devices.

[1]  C. Yuen,et al.  Effect of copper content on the properties of Ni–Cu–P plated polyester fabric , 2009 .

[2]  Jean-Christophe Charlier,et al.  Graphene and graphite nanoribbons: Morphology, properties, synthesis, defects and applications , 2010 .

[3]  Yadong Jiang,et al.  Enhanced humidity-sensing properties of novel graphene oxide/zinc oxide nanoparticles layered thin film QCM sensor , 2016 .

[4]  D. Formica,et al.  Smart Textile Based on Fiber Bragg Grating Sensors for Respiratory Monitoring: Design and Preliminary Trials , 2015, Biosensors.

[5]  Alessandro Chiolerio,et al.  Wearable Electronics and Smart Textiles: A Critical Review , 2014, Sensors.

[6]  Zhong Lin Wang,et al.  Solution-derived ZnO homojunction nanowire films on wearable substrates for energy conversion and self-powered gesture recognition. , 2014, Nano letters.

[7]  R. Ruoff,et al.  The chemistry of graphene oxide. , 2010, Chemical Society reviews.

[8]  Chunya Wang,et al.  An All-Silk-Derived Dual-Mode E-skin for Simultaneous Temperature-Pressure Detection. , 2017, ACS applied materials & interfaces.

[9]  Walter Lang,et al.  Membrane-based thermal flow sensors on flexible substrates , 2013 .

[10]  T. Lu,et al.  Paper: A promising material for human-friendly functional wearable electronics , 2017 .

[11]  Minjeong Ha,et al.  Micro/nanostructured surfaces for self-powered and multifunctional electronic skins. , 2016, Journal of materials chemistry. B.

[12]  Nikolaos G. Bourbakis,et al.  A Survey on Wearable Sensor-Based Systems for Health Monitoring and Prognosis , 2010, IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews).

[13]  K. Hillman,et al.  Respiratory rate: the neglected vital sign , 2008, The Medical journal of Australia.

[14]  S. Fu,et al.  A wearable strain sensor based on a carbonized nano-sponge/silicone composite for human motion detection. , 2017, Nanoscale.

[15]  A. Carlo,et al.  Substrates for flexible electronics: A practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties , 2011 .

[16]  Qi Wang,et al.  Advanced carbon materials for flexible and wearable sensors , 2017, Science China Materials.

[17]  Yan Qiao,et al.  Fully Printed Ultraflexible Supercapacitor Supported by a Single-Textile Substrate. , 2016, ACS applied materials & interfaces.

[18]  C.R. Merritt,et al.  Textile-Based Capacitive Sensors for Respiration Monitoring , 2009, IEEE Sensors Journal.

[19]  Chang Ming Li,et al.  Silk fabric-based wearable thermoelectric generator for energy harvesting from the human body , 2016 .

[20]  W. Mower,et al.  The reliability of vital sign measurements. , 2002, Annals of emergency medicine.

[21]  Tian-Ling Ren,et al.  High performance flexible strain sensor based on self-locked overlapping graphene sheets. , 2016, Nanoscale.

[22]  A. Khademhosseini,et al.  Nanotechnology in Textiles. , 2016, ACS nano.

[23]  Yong Lin,et al.  Silver nanowires coated on cotton for flexible pressure sensors , 2016 .

[24]  Roman Trobec,et al.  Two Proximal Skin Electrodes — A Respiration Rate Body Sensor , 2012, Sensors.

[25]  Justin A. Blanco,et al.  Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics. , 2010, Nature materials.

[26]  Jani Kivioja,et al.  Ultrafast graphene oxide humidity sensors. , 2013, ACS nano.

[27]  G. Whitesides,et al.  Paper-Based Electrical Respiration Sensor. , 2016, Angewandte Chemie.

[28]  Xiangdong Chen,et al.  The effect of ambient humidity on the electrical properties of graphene oxide films , 2012, Nanoscale Research Letters.

[29]  Nam-Trung Nguyen,et al.  Environment-friendly carbon nanotube based flexible electronics for noninvasive and wearable healthcare , 2016 .

[30]  Richard J. Davidson,et al.  Long-term mindfulness training is associated with reliable differences in resting respiration rate , 2016, Scientific Reports.

[31]  Chunya Wang,et al.  Sheath-Core Graphite/Silk Fiber Made by Dry-Meyer-Rod-Coating for Wearable Strain Sensors. , 2016, ACS applied materials & interfaces.

[32]  Jianjun Luo,et al.  Wearable Textile‐Based In‐Plane Microsupercapacitors , 2016 .

[33]  Jianfeng Zang,et al.  Wrinkled nitrile rubber films for stretchable and ultra-sensitive respiration sensors , 2017 .

[34]  Liu Pengcheng,et al.  Graphene coated nonwoven fabrics as wearable sensors , 2016 .

[35]  S. Ko,et al.  Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications , 2015, Advanced materials.

[36]  F. Stavale,et al.  Quantifying defects in graphene via Raman spectroscopy at different excitation energies. , 2011, Nano letters.

[37]  Fei Wang,et al.  Low-dimensional carbon based sensors and sensing network for wearable health and environmental monitoring , 2017 .

[38]  Liangbing Hu,et al.  A method of printing carbon nanotube thin films , 2006 .

[39]  Christy L Haynes,et al.  Cytotoxicity of graphene oxide and graphene in human erythrocytes and skin fibroblasts. , 2011, ACS applied materials & interfaces.

[40]  Gian-Luca Bona,et al.  An Optical Fibre-Based Sensor for Respiratory Monitoring , 2014, Sensors.

[41]  Zhisong Lu,et al.  Highly conductive graphene-coated silk fabricated via a repeated coating-reduction approach , 2015 .

[42]  Chwee Teck Lim,et al.  Emerging flexible and wearable physical sensing platforms for healthcare and biomedical applications , 2016, Microsystems & Nanoengineering.

[43]  S. Chang,et al.  Microfluidic capacitive sensors with ionic liquid electrodes and CNT/PDMS nanocomposites for simultaneous sensing of pressure and temperature , 2017 .

[44]  Peng Jiang,et al.  Smart Sensing Strip Using Monolithically Integrated Flexible Flow Sensor for Noninvasively Monitoring Respiratory Flow , 2015, Sensors.

[45]  Roland Zengerle,et al.  Lab-on-a-Foil: microfluidics on thin and flexible films. , 2010, Lab on a chip.

[46]  Zhiping Xu,et al.  Carbonized Silk Fabric for Ultrastretchable, Highly Sensitive, and Wearable Strain Sensors , 2016, Advanced materials.

[47]  Jung-Yong Lee,et al.  Wearable textile battery rechargeable by solar energy. , 2013, Nano letters.

[48]  B. Hök,et al.  Critical review of non-invasive respiratory monitoring in medical care , 2003, Medical and Biological Engineering and Computing.

[49]  M. Woollard,et al.  4 Shortness of breath , 2004, Emergency Medicine Journal.