Friction and wear behavior of new light steel reinforced by beryllium alloying

[1]  Riping Liu,et al.  Microstructure and mechanical properties of a Fe–30Mn–10Al–1.5C–xBe (x = 0, 0.5, 1.0, 1.5) Be low-density steels , 2023, Materials Characterization.

[2]  Zhuangzhuang Hou,et al.  Surface modification of 40Cr steel subjected to composite strengthening grinding process , 2022, Materials Characterization.

[3]  Bo Li,et al.  Effect of loading on microstructure and friction and wear behavior of an austenite lightweight steel , 2022, Tribology International.

[4]  M. Easton,et al.  Effect of Ti and TiC additions on the microstructure and wear resistance of high chromium white irons produced by laser directed energy deposition , 2022, Wear.

[5]  F. Ghadami,et al.  Microstructural characteristics and tribological properties of the localized laser surface treatment of AISI 420 stainless steel , 2022, Tribology International.

[6]  L. Shang,et al.  Temperature-dependent tribological behavior of CrAlN/TiSiN tool coating sliding against 7A09 Al alloy and GCr15 bearing steel , 2022, Tribology International.

[7]  Guanzhen Zhang,et al.  Damage behavior and microstructure evolution of ER8C wheel steel under rolling wear conditions , 2022, Wear.

[8]  M. Hu,et al.  Investigation of high temperature tribological performance of TiZrV0.5Nb0.5 refractory high-entropy alloy optimized by Si microalloying , 2022, Tribology International.

[9]  D. Duan,et al.  Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition , 2022, Tribology International.

[10]  L. M. Vilhena,et al.  Tribological behaviour of different formulations of WC composites , 2022, Wear.

[11]  K. Das,et al.  The effect of microstructure and mechanical properties on the slurry erosion behavior of carbide-free bainitic and martensitic steel , 2022, Wear.

[12]  F. Luo,et al.  Effect of tungsten carbide content on the tribological behavior of TiB2–TiC-based cermets , 2022, Wear.

[13]  H. Qiu,et al.  Effects of (Ti, Mo) C particles on the abrasive wear -corrosion of low alloy martensitic steel , 2022, Wear.

[14]  Y. Xia,et al.  Effect of nano-bainite microstructure and residual stress on friction properties of M50 bearing steel , 2022, Tribology International.

[15]  L. Du,et al.  Effect of initial spheroidizing microstructure after quenching and tempering on wear and contact fatigue properties of Gr15 bearing steel , 2022, Materials Today Communications.

[16]  G. Barber,et al.  Microstructures, compressive residual stress, friction behavior, and wear mechanism of quenched and tempered shot peened medium carbon steel , 2021, Wear.

[17]  H. Jafarian,et al.  The influence of Aluminum on microstructure, mechanical properties and wear performance of Fe-14%Mn-1.05%C Manganese steel , 2021, Journal of Materials Research and Technology.

[18]  T. Liu,et al.  Effect of isothermal quenching on microstructure and hardness of GCr15 steel , 2021, Journal of Materials Research and Technology.

[19]  Li Chen,et al.  Structure, mechanical properties, thermal stability and oxidation resistance of arc evaporated CrAlBN coatings , 2021, Surface and Coatings Technology.

[20]  Cong Sun,et al.  Investigation on grinding-induced dynamic recrystallization behavior of 40Cr alloy steel , 2021 .

[21]  L. M. Vilhena,et al.  Abrasive wear resistance of WC-based composites, produced with Co or Ni-rich binders , 2021 .

[22]  Mohammad Ali Sohrabizadeh,et al.  The Effects of Age Hardening on Tribological Behavior of Lightweight Fe-Mn-Al-C Steel , 2021, Journal of Materials Engineering and Performance.

[23]  Xiyao Liu,et al.  The influence mechanism of MoS2 and NiTi microparticles on the friction and wear properties of bearing steel , 2021 .

[24]  T. Yuan,et al.  The synergy of V and Si on the microstructure, tribological and oxidation properties of AlCrN based coatings , 2021 .

[25]  Zhao-dong Wang,et al.  Effect of (Ti, Mo)xC Particle Size on Wear Performance of High Titanium Abrasion-resistant Steel , 2021 .

[26]  Zhijian Peng,et al.  Dry Sliding Behavior of Qbe-2 Beryllium Bronze against 38CrMoAlA Steel in Pneumatic Downhole Motor under Different Loads , 2021, Metals.

[27]  Tengfei Zhang,et al.  Influence of V addition on the microstructure, mechanical, oxidation and tribological properties of AlCrSiN coatings , 2020 .

[28]  S. Sokolov,et al.  Influence of laser quenching modes on tribological characteristics of 40Cr steel , 2020, IOP Conference Series: Materials Science and Engineering.

[29]  Zhao-dong Wang,et al.  Solidification and sliding wear behavior of low-alloy abrasion-resistant steel reinforced with TiC particles , 2020 .

[30]  Zhao-dong Wang,et al.  Three-body abrasion wear resistance of TiC-reinforced low-alloy abrasion-resistant martensitic steel under dry and wet sand conditions , 2020 .

[31]  H. Liao,et al.  Microstructure and tribological property of selective laser melted Fe-Mn-Al-C alloy , 2020, Materials Letters.

[32]  E. Pereloma,et al.  Martensitic wear resistant steels alloyed with titanium , 2020 .

[33]  M. Keskitalo,et al.  Mechanical testing of friction drilled and form tapped bolt joints for abrasion resistant steel applications , 2019, PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019.

[34]  Yong Du,et al.  Mechanical properties, thermal stability and oxidation resistance of Ta-doped CrAlN coatings , 2019, Surface and Coatings Technology.

[35]  Hui-bin Wu,et al.  Effect of cooling rate on microstructure, hardness, and residual stress of 0.28C–0.22Ti wear-resistant steel , 2019, Journal of Iron and Steel Research International.

[36]  Zhengyi Jiang,et al.  Adhesion, friction and wear analysis of a chromium oxide scale on a ferritic stainless steel , 2019, Wear.

[37]  S. Platov,et al.  Evaluation Method of Impact and Abrasive Steel Resistance , 2019, Journal of Friction and Wear.

[38]  Zhao-dong Wang,et al.  Effects of using (Ti,Mo)C particles to reduce the three-body abrasive wear of a low alloy steel , 2018, Wear.

[39]  A. Haldar,et al.  Current state of Fe-Mn-Al-C low density steels , 2017 .

[40]  Wei-min Liu,et al.  High-temperature tribological behavior of a nickel alloy matrix solid-lubricating composite under vacuum , 2017 .

[41]  B. Mishra,et al.  Effect of heat treatment on wear resistance of Fe–Cr–Mn–C–N high-interstitial stainless steel , 2016 .

[42]  K. Pawlak,et al.  The influence of austenitizing temperature on prior austenite grain size and resistance to abrasion wear of selected low-alloy boron steel , 2016 .

[43]  Qiang Ma,et al.  Influence of boron content on the microstructure and tribological properties of Cr-B-N coatings in water lubrication , 2016 .

[44]  Anssi Laukkanen,et al.  Wear behavior and work hardening of high strength steels in high stress abrasion , 2015 .

[45]  K. Wittmaack.  Novel model of negative secondary ion formation and its use to refine the electronegativity of almost fifty elements. , 2014, Analytical chemistry.

[46]  Wei-min Liu,et al.  Tribological behaviour of Fe–28Al–5Cr alloy reinforced by TiC under acid environment , 2013 .

[47]  Wei-min Liu,et al.  Effect of TiB2 on dry-sliding tribological properties of TiAl intermetallics , 2013 .

[48]  C. Liu,et al.  Low-density low-carbon Fe–Al ferritic steels , 2013 .

[49]  Dong-Woo Suh,et al.  Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties , 2013, Science and technology of advanced materials.

[50]  T. Xiong,et al.  Microstructure and Wear Resisting Property of 40Cr Steel Treated by Supersonic Particles Bombarding , 2012 .

[51]  J. Vleugels,et al.  Impact of Cr3C2/VC addition on the dry sliding friction and wear response of WC–Co cemented carbides , 2009 .

[52]  J. Hawk,et al.  Wear of titanium carbide reinforced metal matrix composites , 1999 .

[53]  Yonghe Zhang.  Electronegativities of elements in valence states and their applications. 2. A scale for strengths of Lewis acids , 1982 .

[54]  V. Wildemann,et al.  Experimental study of mechanical properties of steel 40Cr in the necking area of specimen during the postcritical deformation , 2018 .

[55]  D. Catana.  INFLUENCE OF THE HEAT TREATMENTS ON THE WEAR-RESISTANT STEELS PROPERTIES , 2015 .

[56]  L. Shi.  Effects of La on Microstructure and Properties of 17wt%Cr Ferritic Stainless Steel , 2010 .

[57]  V. M. Yakovlev.  New method for estimating the electronegativity of elements , 2002 .