Development of three-dimensional numerical manifold method for jointed rock slope stability analysis

Abstract This paper presents a three-dimensional numerical manifold method (NMM) for jointed rock slope stability analysis. The main barriers for realistic rock slope stability analysis are discussed, and the unique features of the NMM which make it stand out in slope analysis are emphasized. The framework of the 3-D NMM is established via a regularly-patterned tetrahedral mesh-based mathematical cover system. A contact detection algorithm is then customized to fit the 3-D NMM characteristics. The developed code is first calibrated by two simple cases: inclined plane sliding and tetrahedral wedge sliding, and then applied to a more complex slope scenario. The complete failure process involving large displacement and rotation of multiple interaction blocks is exhibited dynamically. Two typical stabilization/protection techniques are also investigated. The developed 3-D NMM could be potentially used to find the trigger/failure mechanism of jointed rock slopes, so as to optimize the slope stabilization or protection design.

[1]  Guoxin Zhang,et al.  SIMULATION OF TOPPLING FAILURE OF ROCK SLOPE BY NUMERICAL MANIFOLD METHOD , 2010 .

[2]  Takashi Kyoya,et al.  Finite cover method for progressive failure with cohesive zone fracture in heterogeneous solids and structures , 2006 .

[3]  Lanru Jing,et al.  A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering , 2003 .

[4]  Jiannong Fang,et al.  A 3D distinct lattice spring model for elasticity and dynamic failure , 2011 .

[5]  Yossef H. Hatzor,et al.  Stability of shallow karstic caverns in blocky rock masses , 2010 .

[6]  Bak Kong Low,et al.  Reliability Analysis of Rock Wedges , 1997 .

[7]  David M. Doolin,et al.  Investigation of slope-stability kinematics using discontinuous deformation analysis , 2001 .

[8]  D. Owen,et al.  Discrete fracture in quasi-brittle materials under compressive and tensile stress states , 2004 .

[9]  Y. H. Zhang,et al.  Formulation of a Three-dimensional Numerical Manifold Method with Tetrahedron and Hexahedron Elements , 2008 .

[10]  Guowei Ma,et al.  Modeling complex crack problems using the numerical manifold method , 2009 .

[11]  E. Hoek,et al.  Rock slope engineering , 1974 .

[12]  Lanru Jing,et al.  Modeling of fluid flow and solid deformation for fractured rocks with discontinuous deformation analysis (DDA) method , 2001 .

[13]  Louis Ngai Yuen Wong,et al.  Frictional crack initiation and propagation analysis using the numerical manifold method , 2012 .

[14]  Chuangbing Zhou,et al.  Modeling Unconfined Seepage Flow Using Three-Dimensional Numerical Manifold Method , 2010 .

[15]  Guowei Ma,et al.  DEVELOPMENT OF 3D NUMERICAL MANIFOLD METHOD , 2010 .

[16]  Yuzo Ohnishi,et al.  Simulation of the mechanical behavior of inclined jointed rock masses during tunnel construction using Discontinuous Deformation Analysis (DDA) , 2004 .

[17]  Mao Kurumatani,et al.  Finite cover method with multi‐cover layers for the analysis of evolving discontinuities in heterogeneous media , 2009 .

[18]  K. W. John.  Graphical Stability Analysis of Slopes in Jointed Rock , 1968 .

[19]  Qinghui Jiang,et al.  Validation of block theory and three-dimensional discontinuous deformation analysis as wedge stability analysis methods , 2003 .

[20]  Peter Wriggers,et al.  Computational Contact Mechanics , 2002 .

[21]  Q. H. Jiang,et al.  A Model of Point-to-Face Contact for Three-Dimensional Discontinuous Deformation Analysis , 2004 .

[22]  M. R. Yeung,et al.  A model of edge-to-edge contact for three-dimensional discontinuous deformation analysis , 2007 .

[23]  P. A. Cundall,et al.  NUMERICAL MODELLING OF DISCONTINUA , 1992 .

[24]  Kenjiro Terada,et al.  Finite cover method for linear and non‐linear analyses of heterogeneous solids , 2003 .

[25]  Richard E. Goodman,et al.  Methods of Geological Engineering in Discontinuous Rocks , 1975 .

[26]  Kenjiro Terada,et al.  An integrated procedure for three‐dimensional structural analysis with the finite cover method , 2005 .

[27]  D. Owen,et al.  A combined finite‐discrete element method in transient dynamics of fracturing solids , 1995 .

[28]  Guowei Ma,et al.  Numerical analysis of 2-D crack propagation problems using the numerical manifold method , 2010 .

[29]  Gen-Hua Shi,et al.  Manifold Method of Material Analysis , 1992 .

[30]  Guowei Ma,et al.  A NUMERICAL MANIFOLD METHOD FOR PLANE MICROPOLAR ELASTICITY , 2010 .

[31]  Guowei Ma,et al.  Footwall slope stability analysis with the numerical manifold method , 2011 .