Fibre hybridisation in polymer composites: a review

[1]  I. Verpoest,et al.  Failure behaviour of self-reinforced polypropylene at and below room temperature , 2014 .

[2]  Ignace Verpoest,et al.  The influence of process parameters on the properties of hot compacted self-reinforced polypropylene composites , 2014 .

[3]  I. Ward,et al.  Hybrid carbon fibre/nylon 12 single polymer composites , 2014 .

[4]  L. Gorbatikh,et al.  Ductile steel fibre composites with brittle and ductile matrices , 2014 .

[5]  Ignace Verpoest,et al.  Advanced Materials Enabling High-Volume Road Transport Applications of Lightweight Structural Composite Parts , 2014 .

[6]  M. Wisnom,et al.  Numerical modelling of the damage modes in UD thin carbon/glass hybrid laminates , 2014 .

[7]  Yentl Swolfs,et al.  Tensile behaviour of intralayer hybrid composites of carbon fibre and self-reinforced polypropylene , 2014 .

[8]  E. C. Botelho,et al.  Hybridization effect on the mechanical properties of curaua/glass fiber composites , 2013 .

[9]  Yan Li,et al.  Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites , 2013 .

[10]  Ignace Verpoest,et al.  The influence of weave architecture on the mechanical properties of self-reinforced polypropylene , 2013 .

[11]  Michael R Wisnom,et al.  Demonstration of pseudo-ductility in high performance glass-epoxy composites by hybridisation with thin-ply carbon prepreg , 2013 .

[12]  M. Wisnom,et al.  Study of non-linear tensile behaviour of discontinuous carbon-epoxy prepreg composites , 2013 .

[13]  Michael R Wisnom,et al.  19th International Conference on Composite Materials , 2013 .

[14]  M. Boopalan,et al.  Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites , 2013 .

[15]  S. Iannace,et al.  Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties , 2013 .

[16]  C. Santulli,et al.  Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion , 2013 .

[17]  H. El-Dessouky,et al.  Ultra-lightweight carbon fibre/thermoplastic composite material using spread tow technology , 2013 .

[18]  S. Pinho,et al.  Hierarchical scaling law for the strength of composite fibre bundles , 2013 .

[19]  I. Verpoest,et al.  Understanding the interfacial compatibility and adhesion of natural coir fibre thermoplastic composites , 2013 .

[20]  I. Ward,et al.  Toughening of carbon fibre composites by hybridisation with self-reinforced polypropylene , 2013 .

[21]  S. Iannace,et al.  Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites , 2013 .

[22]  F. Tanaka,et al.  The effect of nanostructure upon the compressive strength of carbon fibres , 2013, Journal of Materials Science.

[23]  L. Gorbatikh,et al.  Stress concentrations in an impregnated fibre bundle with random fibre packing , 2013 .

[24]  V. Li.  Can Concrete be Bendable , 2012 .

[25]  M. Kumosa,et al.  The effects of atmospheric aging on a hybrid polymer matrix composite , 2012 .

[26]  M. Kumosa,et al.  Micromechanics modeling of fatigue failure mechanisms in a hybrid polymer matrix composite , 2012 .

[27]  André R Studart,et al.  Towards High‐Performance Bioinspired Composites , 2012, Advanced materials.

[28]  L. Gorbatikh,et al.  Stress concentrations in hybrid unidirectional fibre-reinforced composites with random fibre packings , 2012 .

[29]  Fabrice Pierron,et al.  Proceedings of the 15th European Conference on Composite Materials , 2012 .

[30]  Sharad Shrivastava,et al.  A review on mechanical behavior of natural fiber based hybrid composites , 2012 .

[31]  I. Davies,et al.  Optimal design for the flexural behaviour of glass and carbon fibre reinforced polymer hybrid composites , 2012 .

[32]  I. Davies,et al.  Flexural properties of S‐2 glass and TR30S carbon fiber‐reinforced epoxy hybrid composites , 2012 .

[33]  Chun H. Wang,et al.  Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures , 2012 .

[34]  A. Elayaperumal,et al.  Prediction of tensile properties of hybrid-natural fiber composites , 2012 .

[35]  A. Windle,et al.  Carbon fibres from cellulosic precursors: a review , 2012, Journal of Materials Science.

[36]  L. Gorbatikh,et al.  Damage development in woven carbon fiber/epoxy composites modified with carbon nanotubes under tension in the bias direction , 2011 .

[37]  L. Gorbatikh,et al.  The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites , 2011 .

[38]  M. Kumosa,et al.  Characterization of the fatigue properties of a hybrid composite utilized in high voltage electric transmission , 2011 .

[39]  Ian Sinclair,et al.  In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography , 2011 .

[40]  U. Natarajan,et al.  Effect of glass hybridization and staking sequence on mechanical behaviour of interply coir–glass hybrid laminate , 2011 .

[41]  M. Jawaid,et al.  Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review , 2011 .

[42]  N. K. Naik,et al.  Hybrid composites made of carbon and glass woven fabrics under quasi-static loading , 2011 .

[43]  Hiroshi Saito,et al.  Effect of ply-thickness on impact damage morphology in CFRP laminates , 2011 .

[44]  M. Jawaid,et al.  Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites , 2011 .

[45]  I. Taketa.  Analysis of Failure Mechanisms and Hybrid Effects in Carbon Fibre Reinforced Thermoplastic Composites (Analyse van faalmechanismen en hybride effecten in koolstofvezelversterkte thermoplastische composieten) , 2011 .

[46]  Zengping Zhang,et al.  Hybrid effect on mechanical properties of M40-T300 carbon fiber reinforced Bisphenol A Dicyanate ester composites , 2010 .

[47]  Tomohiro Yokozeki,et al.  Damage characterization in thin-ply composite laminates under out-of-plane transverse loadings , 2010 .

[48]  M. Shokrieh,et al.  Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics , 2010 .

[49]  L. Gorbatikh,et al.  Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene , 2010 .

[50]  P. Noorunnisa Khanam,et al.  Tensile, Flexural, and Compressive Properties of Coir/Silk Fiber-reinforced Hybrid Composites , 2010 .

[51]  Zhishen Wu,et al.  Tensile fatigue behaviour of FRP and hybrid FRP sheets , 2010 .

[52]  F. Delale,et al.  Effect of repeated impacts on the response of plain-woven hybrid composites , 2010 .

[53]  M. Jawaid,et al.  Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties , 2010 .

[54]  A. Bismarck,et al.  Carbon nanotube-based hierarchical composites: a review , 2010 .

[55]  Sabu Thomas,et al.  Dynamic mechanical analysis of pineapple leaf/glass hybrid fiber reinforced polyester composites , 2010 .

[56]  Francisco Gálvez,et al.  Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates , 2010 .

[57]  Ignace Verpoest,et al.  Original mechanism of failure initiation revealed through modelling of naturally occurring microstructures , 2010 .

[58]  Perumalsamy N. Balaguru,et al.  Flexural Response of Inorganic Hybrid Composites With E-Glass and Carbon Fibers , 2010 .

[59]  Numan Behlül Bektaş,et al.  An experimental investigation on the impact behavior of hybrid composite plates , 2010 .

[60]  M. L. Drummond,et al.  Influence of the Stacking Sequence on the Mechanical Properties of Glass/Sisal Hybrid Composites , 2010 .

[61]  Sabu Thomas,et al.  Mechanical Performance of Short Banana/Sisal Hybrid Fiber Reinforced Polyester Composites , 2010 .

[62]  C. Santulli,et al.  Effect of loading-unloading cycles on impact-damaged jute/glass hybrid laminates , 2009 .

[63]  P. H. Parsania,et al.  Performance Evaluation of Treated—Untreated Jute—Carbon and Glass—Carbon Hybrid Composites of Bisphenol-C based Mixed Epoxy—Phenolic Resins , 2009 .

[64]  Benjamin Liaw,et al.  Drop-weight impact of plain-woven hybrid glass–graphite/toughened epoxy composites , 2009 .

[65]  C. Santulli,et al.  Post-impact damage characterization of hybrid configurations of jute/glass polyester laminates using acoustic emission and IR thermography , 2009 .

[66]  A. Khairul,et al.  The Effect of Different Laminations on Mechanical and Physical Properties of Hybrid Composites , 2009 .

[67]  C. Dong.  Development of a Model for Predicting the Transverse Coefficients of Thermal Expansion of Unidirectional Carbon Fibre Reinforced Composites , 2008 .

[68]  Sabu Thomas,et al.  Studies on Tensile and Flexural Properties of Short Banana/Glass Hybrid Fiber Reinforced Polystyrene Composites , 2008 .

[69]  M. Wisnom,et al.  Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites , 2008 .

[70]  K. Ahmed,et al.  Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites , 2007 .

[71]  Richard Weinkamer,et al.  Nature’s hierarchical materials , 2007 .

[72]  Hyeong-Yeol Kim,et al.  Hybrid effect on tensile properties of FRP rods with various material compositions , 2007 .

[73]  R. Drew,et al.  Wettability and spreading kinetics of molten aluminum on copper-coated ceramics , 2006 .

[74]  Ozden O. Ochoa,et al.  Transverse and Longitudinal CTE Measurements of Carbon Fibers and their Impact on Interfacial Residual Stresses in Composites , 2006 .

[75]  Zhishen Wu,et al.  Electrical and Mechanical Characterization of Hybrid CFRP Sheets , 2006 .

[76]  Joachim L. Grenestedt,et al.  Comparison of mechanical properties of glass fiber/vinyl ester and carbon fiber/vinyl ester composites , 2005 .

[77]  G. Jeronimidis,et al.  Partial replacement of E-glass fibers with flax fibers in composites and effect on falling weight impact performance , 2005 .

[78]  Barry D. Davidson,et al.  Effects of Friction, Geometry, and Fixture Compliance on the Perceived Toughness from Three-and Four-Point Bend End-Notched Flexure Tests , 2005 .

[79]  K. John,et al.  Tensile Properties of Unsaturated Polyester-Based Sisal Fiber–Glass Fiber Hybrid Composites , 2004 .

[80]  Francesco Pilati,et al.  Intraply and interply hybrid composites based on E‐glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties , 2004 .

[81]  Changsen Sun,et al.  ACOUSTIC EMISSION CHARACTERIZATION OF DAMAGE IN HYBRID FIBER-REINFORCED POLYMER RODS , 2004 .

[82]  S. Adanur,et al.  Effect of Stacking Sequence on the Mechanical Properties of Glass–Carbon Hybrid Composites before and after Impact , 2002 .

[83]  Sabu Thomas,et al.  The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres , 2002 .

[84]  K. Liao,et al.  Static and Dynamic Fatigue of Glass–Carbon Hybrid Composites in Fluid Environment , 2002 .

[85]  Ying Shan,et al.  Environmental fatigue behavior and life prediction of unidirectional glass–carbon/epoxy hybrid composites , 2001 .

[86]  Hemendra Arya,et al.  Impact response and damage tolerance characteristics of glass-carbon/epoxy hybrid composite plates , 2001 .

[87]  C. Bakis,et al.  Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications , 2001 .

[88]  J. Jang,et al.  Impact behavior of aramid fiber/glass fiber hybrid composite: Evaluation of four-layer hybrid composites , 2001 .

[89]  I. Davies,et al.  Flexural properties of a hybrid polymer matrix composite containing carbon and silicon carbide fibres , 2001 .

[90]  William A. Curtin,et al.  Dimensionality and size effects on the strength of fiber-reinforced composites , 2000 .

[91]  J. Jang,et al.  Effect of laminate geometry on impact performance of aramid fiber/polyethylene fiber hybrid composites , 2000 .

[92]  Chad M. Landis,et al.  Stress concentrations in composites with interface sliding, matrix stiffness and uneven fiber spacing using shear lag theory , 1999 .

[93]  H. Wagner,et al.  Stress concentrations caused by fiber failure in two-dimensional composites , 1999 .

[94]  P. Raju Mantena,et al.  Static and Low-Velocity Impact Response Characteristics of Pultruded Hybrid Glass-Graphite/Epoxy Composite Beams , 1999 .

[95]  H. G. Harris,et al.  Ductile Hybrid Fiber Reinforced Plastic Reinforcing Bar for Concrete Structures: Design Methodology , 1998 .

[96]  D. G. Harlow,et al.  Statistical properties of hybrid composites: asymptotic distributions for strain , 1997 .

[97]  R. Postle,et al.  The tensile strength of hybrid fibre composites: a probabilistic analysis of the hybrid effects , 1996, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[98]  C. Pavithran,et al.  Coir-Glass Intermingled Fibre Hybrid Composites , 1991 .

[99]  Pj Piet Lemstra,et al.  Hybrid composites based on polyethylene and carbon fibres Part 2: influence of composition and adhesion level of polyethylene fibres on mechanical properties , 1990 .

[100]  Pj Piet Lemstra,et al.  Hybrid composites based on polyethylene and carbon fibres Part 3: Impact resistant structural composites through damage management , 1990 .

[101]  T. Adam,et al.  Fatigue behaviour of hybrid composites , 1988 .

[102]  D. G. Harlow,et al.  The Tensile Behavior of Intraply Hybrid Composites II: Micromechanical Model , 1987 .

[103]  M. G. Bader,et al.  Failure modes of hybrid composites consisting of carbon fibre bundles dispersed in a glass fibre epoxy resin matrix , 1987 .

[104]  S.J. Fariborz,et al.  The Tensile Behavior of Intraply Hybrid Composites I: Model and Simulation , 1985 .

[105]  T. Chou,et al.  Dynamic Stress Concentration Factors in Unidirectional Composites , 1985 .

[106]  Hiroshi Fukuda,et al.  Strength of Intermingled Hybrid Composites , 1984 .

[107]  H. Fukuda.  An advanced theory of the strength of hybrid composites , 1984 .

[108]  T. Chou,et al.  Stress concentrations in a hybrid composite sheet , 1983 .

[109]  D. Harlow.  Statistical properties of hybrid composites. I. Recursion analysis , 1983, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[110]  T. Chou,et al.  Monte Carlo Simulation of the Strength of Hybrid Composites , 1982 .

[111]  Tsu-Wei Chou,et al.  A Dynamic Explanation of The Hybrid Effect , 1981 .

[112]  M. G. Bader,et al.  The strength of hybrid glass/carbon fibre composites , 1981 .

[113]  M. G. Bader,et al.  The strength of hybrid glass/carbon fibre composites , 1981 .

[114]  M. Phillips.  Composition parameters for hybrid composite materials , 1981 .

[115]  Tsu-Wei Chou,et al.  Mechanical Properties of Composites , 1980 .

[116]  A. Kelly,et al.  Tensile first cracking strain and strength of hybrid composites and laminates , 1980, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[117]  R. F. Lark,et al.  Mechanical Property Characterization of Intraply Hybrid Composites , 1979 .

[118]  J. Summerscales,et al.  Carbon fibre and glass fibre hybrid reinforced plastics , 1978 .

[119]  H. Wagner,et al.  Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour , 1978 .

[120]  S. L. Phoenix,et al.  The Chain-of-Bundles Probability Model For the Strength of Fibrous Materials I: Analysis and Conjectures , 1978 .

[121]  K. E. Hofer,et al.  Degradation and enhancement of the fatigue behavior of glass/graphite/epoxy hybrid composites after accelerated aging , 1978 .

[122]  C. Zweben.  Tensile strength of hybrid composites , 1977 .

[123]  J. Aveston,et al.  Synergistic fibre strengthening in hybrid composites , 1976 .

[124]  B. Harris,et al.  Impact properties of glass fibre/carbon fibre hybrid composites , 1975 .

[125]  J. L. Perry,et al.  Charpy impact experiments on graphite/epoxy hybrid composites , 1975 .

[126]  B. Harris,et al.  Hybrid carbon and glass fibre composites , 1974 .

[127]  C. Zweben.  An approximate method of analysis for notched unidirectional composites , 1974 .

[128]  John M. Hedgepeth,et al.  Local Stress Concentrations in Imperfect Filamentary Composite Materials , 1967 .

[129]  M. Tang,et al.  Carbonization of cellulose fibers—I. Low temperature pyrolysis , 1964 .

[130]  B. W. Rosen,et al.  Tensile failure of fibrous composites. , 1964 .

[131]  A. Shindo.  130. On the carbonization of polyacrylonitrile fiber , 1964 .

[132]  J. Hedgepeth.  Stress Concentrations in Filamentary Structures , 1961 .

[133]  Leon Mishnaevsky,et al.  Hybrid carbon/glass fiber composites: Micromechanical analysis of structure–damage resistance relationships , 2014 .

[134]  M. Maleque,et al.  Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications , 2014 .

[135]  K. Potter,et al.  Aligned Short Fibre Composites with High Performance , 2013 .

[136]  J. Ivens,et al.  Coefficient of thermal expansion evolution for cryogenic preconditioned hybrid carbon fiber/glass fiber-reinforced polymeric composite materials , 2012, Journal of Thermal Analysis and Calorimetry.

[137]  M. Wisnom,et al.  PSEUDO-DUCTILE BEHAVIOR OF UNIDIRECTIONAL FIBRE REINFORCED POLYAMIDE-12 COMPOSITE BY INTRA-TOW HYBRIDIZATION , 2012 .

[138]  C. Santulli,et al.  Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates , 2011 .

[139]  V. Li.  On Engineered Cementitious Composites ( ECC ) A Review of the Material and Its Applications , 2003 .

[140]  V. Li.  On Engineered Cementitious Composites (ECC) , 2003 .

[141]  M. Wisnom,et al.  Reduction in compressive strain to failure with increasing specimen size in pin-ended buckling tests , 1997 .

[142]  S. Choi.  Free‐Roller Versus Fixed‐Roller Fixtures in Flexure Testing of Advanced Ceramic Materials , 1996 .

[143]  Q. Zeng.  A statistical analysis of the tensile failure and hybrid effect of an intraply hybrid composite , 1994 .

[144]  M. Wisnom,et al.  Stress Concentration Factors Around a Broken Fibre in a Unidirectional Carbon Fibre Reinforced Epoxy , 1994 .

[145]  Keith D. Jones,et al.  Fiber fracture in hybrid composite systems , 1994 .

[146]  V. Kobelev.  Explicit crack problem solutions of hybrid composites , 1993 .

[147]  Y. Qiu,et al.  Micromechanical behavior of Kevlar-149/S-glass hybrid seven-fiber microcomposites. II: Stochastic modeling of stress-rupture of hybrid composites , 1993 .

[148]  Aajm Ton Peijs,et al.  Hybrid composites based on polyethylene and carbon fibres. Part 6: Tensile and fatigue behaviour , 1993 .

[149]  Q. Zeng,et al.  A random critical-core theory of microdamage in interply hybrid composites: I—First failure and hybrid effect , 1993 .

[150]  A. Peijs,et al.  Hybrid composites based on polyethylene and carbon fibres. Part 4: Influence of hybrid design on impact strength , 1991 .

[151]  Michael R Wisnom,et al.  The effect of specimen size on the bending strength of unidirectional carbon fibre-epoxy , 1991 .

[152]  C. Ruiz,et al.  Analysis of damage in stress wave loaded unidirectional composites , 1991 .

[153]  C. Pavithran,et al.  Impact properties of sisal-glass hybrid laminates , 1991 .

[154]  T. Chou,et al.  Probabilistic strength analyses of interlaminated hybrid composites , 1989 .

[155]  E. Fitzer.  Pan-based carbon fibers—present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters , 1989 .

[156]  C. Z. Wang,et al.  Impact resistance and energy absorption mechanisms in hybrid composites , 1989 .

[157]  G. Kretsis,et al.  A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics , 1987 .

[158]  H. Wagner,et al.  On composition parameters for hybrid composite materials , 1982 .

[159]  N. L. Hancox,et al.  Fibre composite hybrid materials , 1981 .

[160]  P. Manders.  The strength of mixed fibre composites. , 1979 .

[161]  L. N. Phillips.  The hybrid effect — does it exist? , 1976 .