Towards an engineering-oriented strategy for building microbial anodes for microbial fuel cells.

The objective of the work was to give some first insight into an engineering-oriented approach to MFC design by focusing on anode optimisation. The effect of various parameters was firstly investigated in half cell set-ups under well-controlled conditions. Microbial anodes were formed from soil leachate under polarisation at -0.2 V vs. SCE with different concentrations of substrate, salt and buffer. It was shown that non-turnover CV could be used to assess the electroactive maturity of the anodes during polarisation. This first phase resulted in the definition of a set of optimal parameter values. In the second phase, an optimal anode was formed in a half-cell under the defined optimal conditions. A numerical approach was then developed to calculate the theoretical maximum power that the anode could provide in an ideal MFC. The concept of "ideal MFC" introduced here allowed the theoretical maximum power to be calculated on the sole basis of the kinetic characteristics of the anode. Finally, a MFC designed in the aim of approaching such ideal conditions generated stable power densities of 6.0 W m(-2), which were among the highest values reported so far. The discrepancy between the theoretical maximum (8.9 W m(-2)) and the experimental results pointed out some limit due to the source of inoculum and suggested possible paths to improvement.

[1]  Yong Zhao,et al.  Three-dimensional conductive nanowire networks for maximizing anode performance in microbial fuel cells. , 2010, Chemistry.

[2]  Byung Hong Kim,et al.  Construction and operation of a novel mediator- and membrane-less microbial fuel cell , 2004 .

[3]  E. Hill,et al.  Microbial nanowires: Is the subsurface “hardwired”? , 2007 .

[4]  U. Schröder,et al.  Effect of fiber diameter on the behavior of biofilm and anodic performance of fiber electrodes in microbial fuel cells. , 2011, Bioresource technology.

[5]  F C Walsh,et al.  Recent progress and continuing challenges in bio-fuel cells. Part II: Microbial. , 2010, Biosensors & bioelectronics.

[6]  Hong Liu,et al.  Production of electricity from acetate or butyrate using a single-chamber microbial fuel cell. , 2005, Environmental science & technology.

[7]  Hong Liu,et al.  Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration. , 2005, Environmental science & technology.

[8]  Uwe Schröder,et al.  Heat treated soil as convenient and versatile source of bacterial communities for microbial electricity generation , 2006 .

[9]  W. Achouak,et al.  Harvesting Electricity with Geobacter bremensis Isolated from Compost , 2012, PloS one.

[10]  Aijie Wang,et al.  Syntrophic interactions improve power production in formic acid fed MFCs operated with set anode potentials or fixed resistances , 2012, Biotechnology and bioengineering.

[11]  Benjamin Erable,et al.  Forming microbial anodes under delayed polarisation modifies the electron transfer network and decreases the polarisation time required. , 2012, Bioresource technology.

[12]  H. Hamelers,et al.  Butler-Volmer-Monod model for describing bio-anode polarization curves. , 2011, Bioresource technology.

[13]  Pierangela Cristiani,et al.  Monitoring of electro-active biofilm in soil , 2008 .

[14]  H. Rismani-Yazdi,et al.  Cathodic limitations in microbial fuel cells: An overview , 2008 .

[15]  Byung Hong Kim,et al.  Electroactive biofilms: Current status and future research needs , 2011 .

[16]  R. Hozalski,et al.  Microbial Biofilm Voltammetry: Direct Electrochemical Characterization of Catalytic Electrode-Attached Biofilms , 2008, Applied and Environmental Microbiology.

[17]  Uwe Schröder,et al.  On the use of cyclic voltammetry for the study of anodic electron transfer in microbial fuel cells , 2008 .

[18]  F. Harnisch,et al.  Improvement of the anodic bioelectrocatalytic activity of mixed culture biofilms by a simple consecutive electrochemical selection procedure. , 2008, Biosensors & bioelectronics.

[19]  Y. Zuo,et al.  Electricity generation by Rhodopseudomonas palustris DX-1. , 2008, Environmental science & technology.

[20]  Bruce E Rittmann,et al.  Proton transport inside the biofilm limits electrical current generation by anode‐respiring bacteria , 2008, Biotechnology and bioengineering.

[21]  G. Gil,et al.  Operational parameters affecting the performannce of a mediator-less microbial fuel cell. , 2003, Biosensors & bioelectronics.

[22]  B. Logan,et al.  Electricity-producing bacterial communities in microbial fuel cells. , 2006, Trends in microbiology.

[23]  Benjamin Erable,et al.  Ultra microelectrodes increase the current density provided by electroactive biofilms by improving their electron transport ability , 2012 .

[24]  Largus T Angenent,et al.  A cost-effective and field-ready potentiostat that poises subsurface electrodes to monitor bacterial respiration. , 2012, Biosensors & bioelectronics.

[25]  Hong Liu,et al.  Sustainable Power Generation in Microbial Fuel Cells Using Bicarbonate Buffer and Proton Transfer Mechanisms , 2007 .

[26]  Hang-Sik Shin,et al.  Variation of power generation at different buffer types and conductivities in single chamber microbial fuel cells. , 2010, Biosensors & bioelectronics.

[27]  Leonard M Tender,et al.  Effect of electrode potential on electrode-reducing microbiota. , 2006, Environmental science & technology.

[28]  Byoung-Chan Kim,et al.  Selection of a variant of Geobacter sulfurreducens with enhanced capacity for current production in microbial fuel cells. , 2009, Biosensors & bioelectronics.

[29]  C. Avignone-Rossa,et al.  Activated carbon cloth as anode for sulfate removal in a microbial fuel cell. , 2008, Environmental science & technology.

[30]  Sean F. Covalla,et al.  Power output and columbic efficiencies from biofilms of Geobacter sulfurreducens comparable to mixed community microbial fuel cells. , 2008, Environmental microbiology.

[31]  B. Logan,et al.  Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. , 2007, Environmental science & technology.

[32]  Ioannis Ieropoulos,et al.  The overshoot phenomenon as a function of internal resistance in microbial fuel cells. , 2011, Bioelectrochemistry.

[33]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[34]  C. Thurston,et al.  Microbial fuel-cells , 1993 .

[35]  D. Lowy,et al.  Harnessing microbially generated power on the seafloor , 2002, Nature Biotechnology.

[36]  H. Park,et al.  Dissimilatory Fe(III) reduction by an electrochemically active lactic acid bacterium phylogenetically related to Enterococcus gallinarum isolated from submerged soil , 2005, Journal of applied microbiology.

[37]  Hong Liu,et al.  Quantification of the internal resistance distribution of microbial fuel cells. , 2008, Environmental science & technology.

[38]  Marcus O. Gay,et al.  Relationships between soil organic matter, nutrients, bacterial community structure, and the performance of microbial fuel cells. , 2012, Environmental science & technology.

[39]  D. R. Bond,et al.  Electrode-Reducing Microorganisms That Harvest Energy from Marine Sediments , 2002, Science.

[40]  Prathap Parameswaran,et al.  Kinetic experiments for evaluating the Nernst-Monod model for anode-respiring bacteria (ARB) in a biofilm anode. , 2008, Environmental science & technology.

[41]  Willy Verstraete,et al.  The anode potential regulates bacterial activity in microbial fuel cells , 2008, Applied Microbiology and Biotechnology.

[42]  B. Logan.  Exoelectrogenic bacteria that power microbial fuel cells , 2009, Nature Reviews Microbiology.

[43]  Haluk Beyenal,et al.  Scaling up microbial fuel cells. , 2008, Environmental science & technology.

[44]  A. Bergel,et al.  Forming electrochemically active biofilms from garden compost under chronoamperometry. , 2008, Bioresource technology.

[45]  Byung Hong Kim,et al.  Electrochemical activity of an Fe(III)-reducing bacterium, Shewanella putrefaciens IR-1, in the presence of alternative electron acceptors , 1999 .

[46]  Jian Sun,et al.  Voltammetry and Growth Physiology of Geobacter sulfurreducens Biofilms as a Function of Growth Stage and Imposed Electrode Potential , 2010 .

[47]  Baikun Li,et al.  The variation of power generation with organic substrates in single-chamber microbial fuel cells (SCMFCs). , 2010, Bioresource technology.

[48]  Derek R. Lovley,et al.  Anaerobes unleashed: Aerobic fuel cells of Geobacter sulfurreducens , 2011 .

[49]  Derek R. Lovley,et al.  Application of cyclic voltammetry to investigate enhanced catalytic current generation by biofilm-modified anodes of Geobacter sulfurreducens strain DL1 vs. variant strain KN400 , 2011 .

[50]  Willy Verstraete,et al.  Microbial Fuel Cells: Recent Advances, Bacterial Communities and Application Beyond Electricity Generation , 2008 .

[51]  Prathap Parameswaran,et al.  Selecting anode-respiring bacteria based on anode potential: phylogenetic, electrochemical, and microscopic characterization. , 2009, Environmental science & technology.

[52]  Bruce E. Logan,et al.  Analysis of polarization methods for elimination of power overshoot in microbial fuel cells , 2011 .

[53]  Yan Qiao,et al.  Electrocatalysis in microbial fuel cells—from electrode material to direct electrochemistry , 2010 .

[54]  P. Liang,et al.  Recent progress in electrodes for microbial fuel cells. , 2011, Bioresource technology.