A Data-Driven Approach to Mixed-Sensitivity Control With Application to an Active Suspension System

In this paper, a data-driven approach is proposed to tune fixed-order controllers for unknown stable LTI plants in a mixed-sensitivity loop-shaping framework. The method requires a single set of input-output samples and it is based on convex optimization techniques; moreover, it asymptotically guarantees the internal stability of the closed-loop system. The effectiveness of the method is illustrated with application to the control of an active suspension system.

[1]  A. Laub,et al.  Feedback properties of multivariable systems: The role and use of the return difference matrix , 1981 .

[2]  Sebastian Engell,et al.  Control of integrated processes: A case study on reactive distillation in a medium-scale pilot plant , 2007 .

[3]  Mi-Ching Tsai,et al.  Robust and Optimal Control , 2014 .

[4]  Diego Eckhard,et al.  Virtual Reference Feedback Tuning for non minimum phase plants , 2009, 2009 European Control Conference (ECC).

[5]  H. Prochazka,et al.  Iterative Feedback Tuning for robust controller design and optimization , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[6]  J. Doyle,et al.  Robust and optimal control , 1995, Proceedings of 35th IEEE Conference on Decision and Control.

[7]  B. Anderson,et al.  Controller Reduction: Concepts and Approaches , 1987, 1987 American Control Conference.

[8]  Richard Y. Chiang,et al.  Robust control toolbox , 1996 .

[9]  Sergio M. Savaresi,et al.  Direct data-driven H2 − H∞ loop-shaping , 2011 .

[10]  Rong-Ching Wu,et al.  Parameter Identification of Induction Machine With a Starting No-Load Low-Voltage Test , 2012, IEEE Transactions on Industrial Electronics.

[11]  Petre Alexandru.  A comparative analysis between the vehicles' passive and active suspensions , 2011 .

[12]  Ramon Vilanova,et al.  Internal Model Controller tuning using the Virtual Reference Approach with Robust Stability , 2011 .

[13]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[14]  Sergio M. Savaresi,et al.  Non-iterative direct data-driven controller tuning for multivariable systems: theory and application , 2012 .

[15]  Sergio M. Savaresi,et al.  On input design for direct data-driven controller tuning , 2012 .

[16]  Sergio M. Savaresi,et al.  Virtual reference feedback tuning: a direct method for the design of feedback controllers , 2002, Autom..

[17]  丸山 徹.  Convex Analysisの二,三の進展について , 1977 .

[18]  Stephen P. Boyd,et al.  Linear controller design: limits of performance , 1991 .

[19]  Bruce A. Francis,et al.  Feedback Control Theory , 1992 .

[20]  Matteo Corno,et al.  Direct data‐driven control of linear time‐delay systems , 2012 .

[21]  Ljubisa Miskovic,et al.  Correlation-Based Tuning of a Restricted-Complexity Controller for an Active Suspension System , 2003, Eur. J. Control.

[22]  Sergio M. Savaresi,et al.  An Application of the Virtual Reference Feedback Tuning Method to a Benchmark Problem , 2003, Eur. J. Control.

[23]  A. Karimi,et al.  Data‐driven model reference control with asymptotically guaranteed stability , 2011 .

[24]  Zhiwei Gao,et al.  Novel Parameter Identification by Using a High-Gain Observer With Application to a Gas Turbine Engine , 2008, IEEE Transactions on Industrial Informatics.

[25]  Stéphan Astier,et al.  A Large-Signal and Dynamic Circuit Model of a $\hbox{H}_{2}/\hbox{O}_{2}$ PEM Fuel Cell: Description, Parameter Identification, and Exploitation , 2010, IEEE Transactions on Industrial Electronics.

[26]  Torsten Söderström,et al.  Errors-in-variables methods in system identification , 2018, Autom..

[27]  P. Welch.  The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .