Matrix crack detection of CFRP using electrical resistance change with integrated surface probes
暂无分享,去创建一个
Hideo Kobayashi | Akira Todoroki | Yoshinobu Shimamura | A. Todoroki | Hideo Kobayashi | Y. Shimamura | Kazuomi Omagari | Kazuomi Omagari
[1] Karl Schulte,et al. Load and failure analyses of CFRP laminates by means of electrical resistivity measurements , 1989 .
[2] D. Chung,et al. Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection , 1993 .
[3] S. Al-Hassani,et al. ELECTRICAL RESISTANCE MEASUREMENT TECHNIQUE FOR DETECTING FAILURE IN CFRP MATERIALS AT HIGH STRAIN RATES , 1994 .
[4] Hideo Kobayashi,et al. Application of Electric Potential Method to Smart Composite Structures for Detecting Delamination , 1995 .
[5] Xiaojun Wang,et al. Sensing delamination in a carbon fiber polymer-matrix composite during fatigue by electrical resistance measurement , 1997 .
[6] Phil E. Irving,et al. Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique , 1998 .
[7] A. Chateauminois,et al. In situ detection of damage in CFRP laminates by electrical resistance measurements , 1999 .
[8] Dae-Cheol Seo,et al. Damage detection of CFRP laminates using electrical resistance measurement and neural network , 1999 .
[9] D.D.L. Chung,et al. Piezoresistivity in continuous carbon fiber polymer‐matrix composite , 2000 .
[10] T. Ishikawa,et al. Cryogenic mechanical properties of CF/polymer composites for tanks of reusable rockets , 2001 .
[11] Akira Todoroki,et al. The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance , 2001 .
[12] Peter Schwartz,et al. Monitoring bending fatigue in carbon-fibre/epoxy composite strands: a comparison between mechanical and resistance techniques , 2001 .
[13] Nobuo Takeda,et al. Electromechanical modeling of unidirectional CFRP composites under tensile loading condition , 2002 .
[14] Akira Todoroki,et al. Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method , 2002 .
[15] Akira Todoroki,et al. Delamination monitoring of graphite/epoxy laminated composite plate of electric resistance change method , 2002 .
[16] A. Todoroki. Electric Resistance Change Method for Cure/Strain/Damage Monitoring of CFRP Laminates , 2004 .
[17] Akira Todoroki,et al. Electrical Resistance Change of Unidirectional CFRP Due to Applied Load , 2004 .
[18] Hideo Kobayashi,et al. Monitoring delamination of laminated CFRP using the electric potential change method: Application of normalization method and the effect of the shape of a delamination crack , 2004 .
[19] Akira Todoroki,et al. Identifying Delamination in Cross-ply and Quasi-isotropic Beams of CFRP by a Standardized Electrical Resistance Method , 2004 .
[20] Hideo Kobayashi,et al. Effects with a matrix crack on monitoring by electrical resistance method , 2004 .
[21] Akira Todoroki,et al. Apparent Negative Piezoresistivity of Single-Ply CFRP due to Poor Electrical Contact of Four-Probe Method , 2005 .
[22] Keiji Ogi,et al. Characterization of piezoresistance behavior in a CFRP unidirectional laminate , 2005 .