Design and demonstration of a novel micro-Coulter counter utilizing liquid metal electrodes

This paper describes the design and demonstration of a novel, easily fabricated micro-Coulter counter utilizing liquid metal electrodes. Fluid and electrode channels were fabricated simultaneously in a single lithographic patterning step. Eutectic gallium?indium (EGaIn) was injected into the device to form functional electrodes in a cross-channel parallel configuration. Functionality of the device was demonstrated at an ac excitation frequency of 5?kHz using a polymer microsphere suspension and simple post-processing techniques. The device successfully detected particles, exhibiting an output response proportional to particle size. EGaIn was demonstrated to be an effective micro-fluidic electrode material and provided a novel approach for the fabrication of a functional micro-Coulter counter.

[1]  Joan Carletta,et al.  A microfluidic multichannel resistive pulse sensor using frequency division multiplexing for high throughput counting of micro particles , 2011 .

[2]  M. Almasri,et al.  A MEMS-based Coulter counter for cell sizing , 2008, SPIE MOEMS-MEMS.

[3]  Ulrike Wallrabe,et al.  Unconventional applications of wire bonding create opportunities for microsystem integration , 2013 .

[4]  E. C. Gregg,et al.  Electrical counting and sizing of mammalian cells in suspension. , 1965, Biophysical journal.

[5]  Deyu Li,et al.  Microfluidic differential resistive pulse sensors , 2008, Electrophoresis.

[6]  M. Dickey,et al.  Inherently aligned microfluidic electrodes composed of liquid metal. , 2011, Lab on a chip.

[7]  Joan Carletta,et al.  A micromachined high throughput Coulter counter for bioparticle detection and counting , 2007 .

[8]  G. Whitesides,et al.  Eutectic gallium-indium (EGaIn): a moldable liquid metal for electrical characterization of self-assembled monolayers. , 2008, Angewandte Chemie.

[9]  J. Samitier,et al.  Low cost micro-Coulter counter with hydrodynamic focusing , 2007 .

[10]  H Morgan,et al.  Analytical electric field and sensitivity analysis for two microfluidic impedance cytometer designs. , 2007, IET nanobiotechnology.

[11]  Mike Liu,et al.  Micro coulter counters with platinum black electroplated electrodes for human blood cell sensing , 2008, Biomedical microdevices.

[12]  Urban Seger,et al.  Dielectric spectroscopy in a micromachined flow cytometer: theoretical and practical considerations. , 2004, Lab on a chip.

[13]  C. P. Bean,et al.  Counting and Sizing of Submicron Particles by the Resistive Pulse Technique , 1970 .

[14]  Joan Carletta,et al.  An impedimetric approach for accurate particle sizing using a microfluidic Coulter counter , 2011 .

[15]  J. Feder,et al.  Off-axis response for particles passing through long apertures in Coulter-type counters , 1990 .

[16]  L. Sohn,et al.  A resistive-pulse sensor chip for multianalyte immunoassays. , 2005, Lab on a chip.

[17]  G. Whitesides,et al.  Eutectic Gallium‐Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature , 2008 .

[18]  C. P. Bean,et al.  Electrokinetic measurements with submicron particles and pores by the resistive pulse technique , 1977 .

[19]  A microfluidic passive pumping Coulter counter , 2010, Microfluidics and nanofluidics.

[20]  Christopher R. Chitambar.  Medical Applications and Toxicities of Gallium Compounds , 2010, International journal of environmental research and public health.

[21]  S. Gawad,et al.  Micromachined impedance spectroscopy flow cytometer for cell analysis and particle sizing. , 2001, Lab on a chip.

[22]  Mengying Zhang,et al.  Real-time detection, control, and sorting of microfluidic droplets. , 2007, Biomicrofluidics.