Design analysis of a machine for manufacturing of bricks from industrial waste: simulations and experiments

[1]  Lu Zeng,et al.  Force transmission performance for a novel deformation wheel with crank slider mechanism , 2020 .

[2]  Mohammad Fadhil Mohammad,et al.  Barriers and Impact of Mechanisation and Automation in Construction to Achieve Better Quality Products , 2016 .

[3]  Kailash Chaudhary,et al.  Optimal design of planar slider-crank mechanism using teaching-learning-based optimization algorithm , 2015 .

[4]  Pen-Chi Chiang,et al.  Utilization of sludge as brick materials , 2003 .

[5]  Roger-Bruno Richard,et al.  Industrialised building systems: reproduction before automation and robotics , 2005 .

[6]  Yu Chen,et al.  Dynamic analysis of a planar slider-crank mechanism with clearance for a high speed and heavy load press system , 2016 .

[7]  Bernd Sauer,et al.  Modeling planar slider-crank mechanisms with clearance joints in RecurDyn , 2014 .

[8]  Mohammad Fadhil Mohammad,et al.  Mechanisation and Automation of the IBS Construction Approach: A Malaysian Experience , 2013 .

[9]  Katia Lucchesi Cavalca,et al.  Dynamic analysis of a lubricated planar slider–crank mechanism considering friction and Hertz contact effects , 2014 .

[10]  S. O. Yakubu,et al.  Design, Construction and Testing Of a Multipurpose Brick/Block Moulding Machine , 2015 .

[11]  J. Shim,et al.  Kinematic Conceptual Design of In-Line Four-Cylinder Variable Compression Ratio Engine Mechanisms Considering Vertical Second Harmonic Acceleration , 2020, Applied Sciences.

[12]  R. A. Lacerda,et al.  Revisión sistemática sobre delantales quirúrgicos en el control de la contaminación/infección del local quirúrgico , 2009 .

[13]  Kyu-Jin Cho,et al.  Design of a slider-crank leg mechanism for mobile hopping robotic platforms , 2013 .

[14]  Fuwu Yan,et al.  Optimization design of piston structure for abnormal noise control in a single-cylinder gasoline engine , 2018 .

[15]  S. B. Matekar,et al.  Displacement analysis of slider in slider-crank mechanism with joint clearance , 2020 .

[16]  Rahul V. Ralegaonkar,et al.  Reuse of cotton and recycle paper mill waste as building material , 2012 .

[17]  H. Kamarudin,et al.  New Processing Method of Kaolin-Based Geopolymer Brick by Using Geopolymer Brick Machine , 2013 .

[18]  Xing Liu,et al.  3D design of machine for gypsum hollow brick based on UG , 2015 .

[19]  R. Sowmya,et al.  Design and Implementation of Brick Making Machine Integrated with Smart IIoT Application , 2020 .

[20]  Nursev Bilgin,et al.  Use of waste marble powder in brick industry , 2012 .

[21]  R. A. Lacerda,et al.  [Systematic review of surgical gowns in the control of contamination/surgical site infection]. , 2009, Revista da Escola de Enfermagem da U S P.

[22]  Jamaludin Shamsul Baharin,et al.  Development of Pilot Plant for Novel Geopolymer Brick Making Machine , 2013 .

[23]  Dong Yang,et al.  Investigations on the dynamic characteristics of a planar slider-crank mechanism for a high-speed press system that considers joint clearance , 2017 .