Heat transfer enhancement mechanisms in inline and staggered parallel-plate fin heat exchangers

Abstract Heat transfer enhancement mechanisms and performance of parallel-plate fin heat exchangers are studied. Geometry effects such as finite fin thickness and inline vs staggered arrangements have been investigated. The time-dependent flow behavior due to vortex shedding has been taken into consideration by solving unsteady equations in two-dimensions. Companion steady symmetrized flow calculations have also been performed to identify the effect of vortices on heat transfer and frictional loss. Additional comparisons have been made with theoretical results for fully developed flow between parallel plates and numerical :results for restarted boundary layers to quantify boundary layer restart mechanism.

[1]  S. Balachandar,et al.  Effect of three‐dimensionality on the lift and drag of nominally two‐dimensional cylinders , 1995 .

[2]  Danesh K. Tafti,et al.  Comparison of some upwind-biased high-order formulations with a second-order central-difference scheme for time integration of the incompressible Navier-Stokes equations , 1996 .

[3]  Danesh K. Tafti,et al.  Vorticity dynamics and scalar transport in separated and reattached flow on a blunt plate , 1993 .

[4]  Ephraim M Sparrow,et al.  Heat-transfer, pressure-drop and performance relationships for in-line, staggered, and continuous plate heat exchangers , 1979 .

[5]  F. Harlow,et al.  Numerical Calculation of Time‐Dependent Viscous Incompressible Flow of Fluid with Free Surface , 1965 .

[6]  F. White.  Viscous Fluid Flow , 1974 .

[7]  George Em Karniadakis,et al.  A CONSERVATIVE ISOPARAMETRIC SPECTRAL ELEMENT METHOD FOR FORCED CONVECTION; APPLICATION TO FULLY DEVELOPED FLOW IN PERIODIC GEOMETRIES , 1986 .

[8]  Cristina H. Amon,et al.  Spectral element simulations of unsteady forced convective heat transfer: application to compact heat exchanger geometries , 1991 .

[9]  R. Shah,et al.  Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress , 1995 .

[10]  R. M. Manglik,et al.  Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger , 1995 .

[11]  E. Sparrow,et al.  Measurements of heat transfer and pressure drop for an array of staggered plates aligned parallel to an air flow , 1980 .

[12]  Martin Fiebig,et al.  Heat Transfer Enhancement by Longitudinal Vortices in a Fin-Tube Heat Exchanger Element With Flat Tubes , 1996 .

[13]  T. Sato,et al.  Numerical and experimental studies on a two-dimensional model of an offset-strip-fin type compact heat exchanger used at low Reynolds number , 1985 .

[14]  E. Sparrow,et al.  Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area , 1977 .

[15]  A. Okajima.  Strouhal numbers of rectangular cylinders , 1982, Journal of Fluid Mechanics.

[16]  S. Balachandar,et al.  Computations of flow and heat transfer in parallel-plate fin heat exchangers on the CM-5: effects of flow unsteadiness and three-dimensionality , 1997 .

[17]  Suhas V. Patankar,et al.  An analysis of the effect of plate thickness on laminar flow and heat transfer in interrupted-plate passages , 1981 .

[18]  Ralph L. Webb,et al.  Heat transfer and friction in the offset stripfin heat exchanger , 1987 .