Experimental study on condensation heat transfer inside a single circular minichannel

Abstract The measurement of the condensation heat transfer coefficient inside micro- and minichannels is still somewhat elusive due to the difficult task of getting accurate values of the heat transfer coefficients during the condensation process, particularly when studied within single minichannels. The present paper reports local heat transfer coefficients obtained from the measurement of the local heat flux and the direct measurement of the saturation and wall temperatures during condensation of R134a and R32 within a single circular 0.96 mm diameter minichannel. Except for the lowest mass velocity, the test results do not show significant discrepancy from the trends expected for macroscale tubes.

[1]  L. Friedel.  Improved Friction Pressure Drop Correlation for Horizontal and Vertical Two-Phase Pipe Flow , 1979 .

[2]  S. Rouhani,et al.  CALCULATION OF VOID VOLUME FRACTION IN THE SUBCOOLED AND QUALITY BOILING REGIONS , 1970 .

[3]  Fred W. Staub,et al.  Local condensing heat transfer coefficients in the annular flow regime , 1971 .

[4]  David F. Fletcher,et al.  Local condensation heat transfer rates in fine passages , 2003 .

[5]  Davide Del Col,et al.  Condensation Heat Transfer and Pressure Gradient Inside Multiport Minichannels , 2005 .

[6]  Nae-Hyun Kim,et al.  Condensation heat transfer of R-22 and R-410A in flat aluminum multi-channel tubes with or without micro-fins , 2003 .

[7]  Michael Ohadi,et al.  Force-fed evaporation and condensation utilizing advanced micro-structured surfaces and micro-channels , 2008, Microelectron. J..

[8]  R. Webb,et al.  Effect of Hydraulic Diameter on Condensation of R-134A in Flat, Extruded Aluminum Tubes , 2001 .

[9]  S. Koyama,et al.  Condensation of Refrigerant in a Multi-Port Channel , 2003 .

[10]  Davide Del Col,et al.  Condensation of Halogenated Refrigerants Inside Smooth Tubes , 2002 .

[11]  Davide Del Col,et al.  Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube , 2001 .

[12]  Srinivas Garimella,et al.  Condensation Flow Mechanisms in Microchannels: Basis for Pressure Drop and Heat Transfer Models , 2004 .

[13]  W. Wang,et al.  A condensation heat transfer correlation for millimeter-scale tubing with flow regime transition , 2002 .

[14]  R. Webb,et al.  Condensation of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins , 1996 .

[15]  R. Webb,et al.  Correlation of two-phase friction for refrigerants in small-diameter tubes , 2001 .

[16]  Satish G. Kandlikar,et al.  Evolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology , 2003 .

[17]  S. Garimella,et al.  Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels , 2006 .

[18]  A. Cavallini,et al.  Condensation in Horizontal Smooth Tubes: A New Heat Transfer Model for Heat Exchanger Design , 2006 .

[19]  M. Kim,et al.  A Study of Condensation Heat Transfer in a Single Mini-Tube and a Review of Korean Micro- and Mini-Channel Studies , 2003 .

[20]  Ralph L. Webb,et al.  A New Equivalent Reynolds Number Model for Condensation in Smooth Tubes , 1998 .

[21]  Stéphane Colin,et al.  Heat Transfer and Fluid Flow in Minichannels and Microchannels , 2005 .

[22]  Hassan M. Soliman,et al.  The mist-annular transition during condensation and its influence on the heat transfer mechanism , 1986 .

[23]  A. Cavallini,et al.  Update on Condensation Heat Transfer and Pressure Drop inside Minichannels , 2006 .