An Investigation of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining

A thermal model estimating workpiece temperature in orthogonal turn-milling compound machining for the case with noneccentricity between rotation axes of workpiece and tool has been established in this paper. Milling tool and machining history were discretized into infinitesimal elements of equal size to deal with complicated cutter geometry and intermittent cutting procedure. The geometries of milling tool and workpiece were analyzed to calculate the instantaneous chip thickness, axial depth of cut, and angles of cutting entry and exit. Heat source during cutting process was considered as instantaneous moving rectangular heat source and heat conducting function in infinite solid thermal conductivity was developed. Experiments measuring cutting force and workpiece temperature were launched to test validity of this model and figure out the importance of effects those factors have on workpiece temperature from variance analysis of orthogonal experiment results. Furthermore, simulations to calculate peak temperature of workpiece were carried out by this model with relevant machining parameters and the results matched conclusions from experiment well.

[1]  Bruce L. Tai,et al.  Workpiece Temperature During Deep-Hole Drilling of Cast Iron Using High Air Pressure Minimum Quantity Lubrication , 2013 .

[2]  B. Li,et al.  Experimental Investigation of Hard Turning Mechanisms by PCBN Tooling Embedded Micro Thin Film Thermocouples , 2013 .

[3]  S. Liang,et al.  Theoretical Modeling of Cutting Temperature Distribution by Considering the Material Thermal Properties as Functions of Temperature , 2011 .

[4]  Sanjay Agarwal,et al.  Predictive modeling of force and power based on a new analytical undeformed chip thickness model in ceramic grinding , 2013 .

[5]  P. K. Venuvinod,et al.  Estimation of rake temperatures in free oblique cutting , 1986 .

[6]  Dirk Werschmoeller,et al.  Measurement of Transient Tool-Internal Temperature Fields During Hard Turning by Insert-Embedded Thin Film Sensors , 2012 .

[7]  J. C. Jaeger.  Moving sources of heat and the temperature at sliding contacts , 1943, Journal and proceedings of the Royal Society of New South Wales.

[8]  R. Komanduri,et al.  Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface , 2001 .

[9]  D. J. Richardson,et al.  Modelling of cutting induced workpiece temperatures for dry milling , 2006 .

[10]  M. Nouari,et al.  Surface integrity of dry machined titanium alloys , 2009 .

[11]  A. Torrance,et al.  Measurement of grinding temperatures using a foil/workpiece thermocouple , 2012 .

[12]  Kai Cheng,et al.  An Innovative Method to Measure the Cutting Temperature in Process by Using an Internally Cooled Smart Cutting Tool , 2013 .

[13]  Jun Ni,et al.  Estimation of Milling Tool Temperature Considering Coolant and Wear , 2012 .

[14]  Hisataka Tanaka,et al.  Temperature Variation in the Cutting Tool in End Milling , 2011 .

[15]  Yusuf Altintas,et al.  Unified cutting force model for turning, boring, drilling and milling operations , 2012 .

[16]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[17]  S. Malkin,et al.  Inclined Moving Heat Source Model for Calculating Metal Cutting Temperatures , 1984 .

[18]  Wei Zhaocheng,et al.  Cutting force prediction in ball end milling of sculptured surface with Z-level contouring tool path , 2011 .

[19]  Bruce L. Tai,et al.  An Inverse Heat Transfer Method for Determining Workpiece Temperature in Minimum Quantity Lubrication Deep Hole Drilling , 2012 .

[20]  Ranga Komanduri,et al.  Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source , 2000 .

[21]  Fangyu Peng,et al.  An investigation of workpiece temperature variation in end milling considering flank rubbing effect , 2013 .

[22]  A. Moufki,et al.  Thermoviscoplastic modelling of oblique cutting: forces and chip flow predictions , 2000 .

[23]  E.J.A. Armarego,et al.  Computer Based Modelling of Popular Machining Operations for Force and Power Prediction , 1985 .

[24]  Tuğrul Özel,et al.  Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process—Part I: Predictions of Tool Forces, Stresses, and Temperature Distributions , 2006 .

[25]  Min Wan,et al.  Cutting force modeling for flat end milling including bottom edge cutting effect , 2010 .

[26]  M. C. Shaw.  Metal Cutting Principles , 1960 .