Human-operated 3D micro-manipulator with haptic feedback

In this work we present a tool for human-controlled 3D assembly of micro-objects. The setup consists of a MEMS-based microgripper with integrated force sensor, piezo-positioners and a stereo micro-scope, all available commercially. Both position and opening of the gripper (3.5-DOF) can be intuitively controlled by the human operator through a Phantom haptic interface using only one hand. Additionally the gripper's tilt angle can be adjusted. The measured force is presented to the operator, allowing secure, force-controlled gripping manipulation as well as exploration of unknown micro-environments. All features are experimentally evaluated and a two-layer pyramid is constructed out of four polystyrol beads (diameter: 45 μm) in an aqueous environment.

[1]  Stephane Regnier,et al.  Analysis of forces for micromanipulations in dry and liquid media , 2006 .

[2]  M. Sitti,et al.  Teleoperated 3-D Force Feedback From the Nanoscale With an Atomic Force Microscope , 2010, IEEE Transactions on Nanotechnology.

[3]  Ronald S. Fearing,et al.  Survey of sticking effects for micro parts handling , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[4]  Wilfrid Boireau,et al.  Improvement of Robotic Micromanipulations Using Chemical Functionalisations , 2010, IPAS.

[5]  Aude Bolopion,et al.  Tuning the gains of haptic couplings to improve force feedback stability in nanorobotics , 2009, 2009 IEEE International Conference on Robotics and Automation.

[6]  Ganapathy Sivakumar,et al.  Haptic controlled three-axis MEMS gripper system. , 2010, The Review of scientific instruments.

[7]  Aude Bolopion,et al.  3D haptic handling of microspheres , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  D. Sinan Haliyo,et al.  An overview of the micro-manipulation system (m ¨ u)MAD , 2005, AIM 2005.

[9]  Silvestro Micera,et al.  Towards a force-controlled microgripper for assembling biomedical microdevices , 2000 .

[10]  Tatsuo Arai,et al.  Development of a micro-manipulation system having a two-fingered micro-hand , 1999, IEEE Trans. Robotics Autom..

[11]  Reymond Clavel,et al.  Characterization of micro manipulation tasks operated with various controlled conditions by microtweezers , 2006 .

[12]  S. Salcudean,et al.  Toward a tele-nanorobotic manipulation system with atomic scale force feedback and motion resolution , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[13]  Lixin Dong,et al.  Dielectrophoretic micro/nanoassembly with microtweezers and nanoelectrodes , 2005, ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005..

[14]  B. Nelson,et al.  Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field , 2007, Journal of Microelectromechanical Systems.

[15]  Cagatay Basdogan,et al.  Haptic Manipulation of Microspheres Using Optical Tweezers Under the Guidance of Artificial Force Fields , 2007, PRESENCE: Teleoperators and Virtual Environments.

[16]  W. G. Matthews,et al.  Controlled manipulation of molecular samples with the nanoManipulator , 2000 .

[17]  Moussa Boukhnifer,et al.  Fault tolerant control of a bilateral teleoperated micromanipulation system , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[18]  Khaled Karrai,et al.  Slip-stick step-scanner for scanning probe microscopy , 2005 .

[19]  Shahzad Khan,et al.  A Haptic Tele-operated System for Microassembly , 2010, IPAS.