In-Process Tool Wear Detection of Uncoated Square End Mill Based on Electrical Contact Resistance

[1]  Geok Soon Hong,et al.  Sensor fusion for online tool condition monitoring in milling , 2007 .

[2]  David Dornfeld,et al.  Tool Wear Detection Using Time Series Analysis of Acoustic Emission , 1989 .

[3]  Fumihiro Itoigawa,et al.  Effects of Fiber Orientation Direction on Tool-Wear Processes in Down-Milling of Carbon Fiber-Reinforced Plastic Laminates , 2015, Int. J. Autom. Technol..

[4]  Michio Uneda,et al.  Real-time evaluation of tool flank wear by in-process contact resistance measurement in face milling , 2012 .

[5]  Soichi Ibaraki,et al.  Efficiency Comparison of Cutting Strategies for End Milling Processes Under Feedrate Scheduling , 2008, Int. J. Autom. Technol..

[6]  Keiichi Shirase,et al.  A Machine Tool Spindle Achieving Real-Time Balancing Using Magnetic Fluid , 2009, Int. J. Autom. Technol..

[7]  Hayato Yoshioka,et al.  A Proposed Ultraprecision Machining Process Monitoring Method Using Causal Network Model of Air Spindle System , 2011, Int. J. Autom. Technol..

[8]  Colin Bradley,et al.  A review of machine vision sensors for tool condition monitoring , 1997 .

[9]  Elso Kuljanić,et al.  TWEM, a method based on cutting forces—monitoring tool wear in face milling , 2005 .

[10]  Takashi Matsumura,et al.  Predictive Cutting Force Model and Cutting Force Chart for Milling with Cutter Axis Inclination , 2013, Int. J. Autom. Technol..

[11]  Ryutaro Tanaka,et al.  Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel , 2013, Int. J. Autom. Technol..

[12]  Min-Yang Yang,et al.  Tool wear monitoring system for CNC end milling using a hybrid approach to cutting force regulation , 2007 .

[13]  Geok Soon Hong,et al.  Wavelet analysis of sensor signals for tool condition monitoring: A review and some new results , 2009 .

[14]  Berend Denkena,et al.  Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning , 2011, Int. J. Autom. Technol..

[15]  Shih-Chieh Lin,et al.  Tool wear monitoring in face milling using force signals , 1996 .

[16]  Masakazu Fujimoto,et al.  Wear Behavior of Grain Cutting Edge in Ultrasonic Assisted Grinding Using Mini-Size Wheel , 2015, Int. J. Autom. Technol..