Understanding the Origins of Higher Capacities at Faster Rates in Lithium-Excess Li x Ni 2 − 4 x / 3 Sb x / 3 O 2

The lithium-excess LixNi2−4x/3Sbx/3O2 (LNSO) materials were previously shown to demonstrate higher capacities and improved cyclability with increasing lithium content. While the performance trend is promising, observed capacities are much lower than theoretical capacities, pointing to a need for further understanding of active redox processes in these materials. In this work, we study the electrochemical behavior of the LNSO materials as a function of lithium content and at slow and fast rates. Surprisingly, Li1.15Ni0.47Sb0.38O2 (LNSO-15) exhibits higher discharge capacities at faster rates and traverses distinct voltage curves at slow and fast rates. To understand these two peculiarities, we characterize the redox activity of nickel, antimony, and oxygen at different rates. While experiments confirm some nickel redox activity and oxygen loss, these two mechanisms cannot account for all observed capacity. We propose that the balance of the observed capacity may be due to reversible oxygen redox and that the rate-dependent voltage curve features may derive from irreversible nickel migration occurring on slow charge. As future high energy density cathodes are likely to contain both lithium excess and high nickel content, both of these findings have important implications for the development of novel high capacity cathode materials.

[1]  Gang Liu,et al.  LiNi0.5Mn0.5O2 hierarchical nanorods as high-capacity cathode materials for Li-ion batteries , 2017 .

[2]  Rahul Malik,et al.  The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials. , 2016, Nature chemistry.

[3]  K. Edström,et al.  Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen. , 2016, Nature chemistry.

[4]  Gerbrand Ceder,et al.  A new class of high capacity cation-disordered oxides for rechargeable lithium batteries: Li–Ni–Ti–Mo oxides , 2015 .

[5]  J. Tarascon,et al.  Understanding the roles of anionic redox and oxygen release during electrochemical cycling of lithium-rich layered Li4FeSbO6. , 2015, Journal of the American Chemical Society.

[6]  G. Ceder,et al.  Designing new lithium-excess cathode materials from percolation theory: nanohighways in Li(x)Ni(2-4x/3)Sb(x/3)O2. , 2015, Nano letters.

[7]  C. Delmas,et al.  Insight into the Atomic Structure of Cycled Lithium-Rich Layered Oxide Li1.20Mn0.54Co0.13Ni0.13O2 Using HAADF STEM and Electron Nanodiffraction , 2015 .

[8]  H. Gasteiger,et al.  Anodic Oxidation of Conductive Carbon and Ethylene Carbonate in High-Voltage Li-Ion Batteries Quantified by On-Line Electrochemical Mass Spectrometry , 2015 .

[9]  Gerbrand Ceder,et al.  The Configurational Space of Rocksalt‐Type Oxides for High‐Capacity Lithium Battery Electrodes , 2014 .

[10]  Erik J. Berg,et al.  Differential Electrochemical Mass Spectrometry Study of the Interface of xLi2MnO3·(1–x)LiMO2 (M = Ni, Co, and Mn) Material as a Positive Electrode in Li-Ion Batteries , 2014 .

[11]  Gerbrand Ceder,et al.  Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries , 2014, Science.

[12]  K. Abraham,et al.  A Li-Rich Layered Cathode Material with Enhanced Structural Stability and Rate Capability for Li-on Batteries , 2014 .

[13]  H. Oji,et al.  Synthesis, Electrochemical Properties, and Reaction Mechanisms of New Lithium-Excess Transition Metal Oxides With Cation Disordered Rock-Salt-Type Structure , 2013 .

[14]  K Ramesha,et al.  Reversible anionic redox chemistry in high-capacity layered-oxide electrodes. , 2013, Nature materials.

[15]  François Weill,et al.  Different oxygen redox participation for bulk and surface: A possible global explanation for the cycling mechanism of Li1.20Mn0.54Co0.13Ni0.13O2 , 2013 .

[16]  J. Colin,et al.  First evidence of manganese-nickel segregation and densification upon cycling in Li-rich layered oxides for lithium batteries. , 2013, Nano letters.

[17]  Debasish Mohanty,et al.  Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction , 2013 .

[18]  Haijun Yu,et al.  High-Energy Cathode Materials (Li2MnO3-LiMO2) for Lithium-Ion Batteries. , 2013, The journal of physical chemistry letters.

[19]  Marie-Liesse Doublet,et al.  High Performance Li2Ru1–yMnyO3 (0.2 ≤ y ≤ 0.8) Cathode Materials for Rechargeable Lithium-Ion Batteries: Their Understanding , 2013 .

[20]  K. Amine,et al.  Understanding the Rate Capability of High‐Energy‐Density Li‐Rich Layered Li1.2Ni0.15Co0.1Mn0.55O2 Cathode Materials , 2014 .

[21]  Hubert A. Gasteiger,et al.  A Novel On-Line Mass Spectrometer Design for the Study of Multiple Charging Cycles of a Li-O2 Battery , 2013 .

[22]  J. Banhart,et al.  Structural changes in Li 2 MnO 3 cathode material for Li-ion batteries , 2013 .

[23]  Haoshen Zhou,et al.  Electrochemical kinetics of the 0.5Li2MnO3·0.5LiMn0.42Ni0.42Co0.16O2 ‘composite’ layered cathode material for lithium-ion batteries , 2012 .

[24]  K. Kang,et al.  Critical Role of Oxygen Evolved from Layered Li–Excess Metal Oxides in Lithium Rechargeable Batteries , 2012 .

[25]  P. He,et al.  High-energy 'composite' layered manganese-rich cathode materials via controlling Li2MnO3 phase activation for lithium-ion batteries. , 2012, Physical chemistry chemical physics : PCCP.

[26]  Hubert A. Gasteiger,et al.  The Effect of Water on the Discharge Capacity of a Non-Catalyzed Carbon Cathode for Li-O2 Batteries , 2012 .

[27]  M. Balasubramanian,et al.  Designing High-Capacity, Lithium-Ion Cathodes Using X-ray Absorption Spectroscopy , 2011 .

[28]  Tsutomu Ohzuku,et al.  High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mA h g−1 , 2011 .

[29]  Miaofang Chi,et al.  Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study , 2011 .

[30]  J. Dahn,et al.  Investigation of the Irreversible Capacity Loss in the Lithium-Rich Oxide Li[Li1/5Ni1/5Mn3/5]O2 , 2011 .

[31]  Yuichi Sato,et al.  Direct observation of the partial formation of a framework structure for Li-rich layered cathode mat , 2011 .

[32]  R M Shelby,et al.  Solvents' Critical Role in Nonaqueous Lithium-Oxygen Battery Electrochemistry. , 2011, The journal of physical chemistry letters.

[33]  C. Fisher,et al.  Microstructural Changes in LiNi0.8Co0.15Al0.05O2 Positive Electrode Material during the First Cycle , 2011 .

[34]  A. Manthiram,et al.  Influence of Cationic Substitutions on the Oxygen Loss and Reversible Capacity of Lithium-Rich Layered Oxide Cathodes , 2011 .

[35]  Shinichi Komaba,et al.  Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2. , 2011, Journal of the American Chemical Society.

[36]  J. Dahn,et al.  Kinetics Study of the High Potential Range of Lithium-Rich Transition-Metal Oxides for Lithium-Ion Batteries by Electrochemical Methods , 2010 .

[37]  P. Novák,et al.  Quantification of Oxygen Loss from Li1 + x ( Ni1 / 3Mn1 / 3Co1 / 3 ) 1 − x O2 at High Potentials by Differential Electrochemical Mass Spectrometry , 2009 .

[38]  Ying Shirley Meng,et al.  Electrochemical and Structural Study of the Layered, “Li-Excess” Lithium-Ion Battery Electrode Material Li[Li1/9Ni1/3Mn5/9]O2 , 2009 .

[39]  Michael M. Thackeray,et al.  Enhancing the rate capability of high capacity xLi2MnO3 · (1 -x)LiMO2 (M = Mn, Ni, Co) electrodes by Li-Ni-PO4 treatment , 2009 .

[40]  P. Biensan,et al.  Mechanisms Associated with the “Plateau” Observed at High Voltage for the Overlithiated Li1.12(Ni0.425Mn0.425Co0.15)0.88O2 System , 2008 .

[41]  P. Novák,et al.  Direct evidence of oxygen evolution from Li1+x(Ni1/3Mn1/3Co1/3)1−xO2 at high potentials , 2008 .

[42]  Y. Meng,et al.  Synthesis and electrochemical properties of layered LiNi 2 / 3 Sb 1 / 3 O 2 , 2007 .

[43]  G. Ceder,et al.  Factors that affect Li mobility in layered lithium transition metal oxides , 2006 .

[44]  Michael Holzapfel,et al.  Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O2. , 2006, Journal of the American Chemical Society.

[45]  John T. Vaughey,et al.  Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries , 2005 .

[46]  H. Sakaebe,et al.  Li de-intercalation mechanism in LiNi0.5Mn0.5O2 cathode material for Li-ion batteries , 2005 .

[47]  G. Ceder,et al.  Role of electronic structure in the susceptibility of metastable transition-metal oxide structures to transformation. , 2004, Chemical reviews.

[48]  B. Fultz,et al.  White lines and d-band occupancy for the 3d transition-metal oxides and lithium transition-metal oxides , 2004 .

[49]  J. Dahn,et al.  In Situ and Ex Situ XRD Investigation of Li [ Cr x Li1 / 3 − x / 3Mn2 / 3 − 2x / 3 ] O 2 ( x = 1 / 3 ) Cathode Material , 2003 .

[50]  M. Balasubramanian,et al.  In Situ X-Ray Absorption Study of a Layered Manganese-Chromium Oxide-Based Cathode Material , 2002 .

[51]  Tsutomu Ohzuku,et al.  Layered Lithium Insertion Material of LiNi1/2Mn1/2O2 : A Possible Alternative to LiCoO2 for Advanced Lithium-Ion Batteries , 2001 .

[52]  B. Figgis,et al.  Ligand Field Theory and Its Applications , 1999 .

[53]  Petr Novák,et al.  Oxidative Electrolyte Solvent Degradation in Lithium‐Ion Batteries: An In Situ Differential Electrochemical Mass Spectrometry Investigation , 1999 .

[54]  M. Broussely,et al.  The relationship between the composition of lithium nickel oxide and the loss of reversibility during the first cycle , 1996 .

[55]  C. Delmas,et al.  Optimization of the Composition of the Li1 − z Ni1 + z O 2 Electrode Materials: Structural, Magnetic, and Electrochemical Studies , 1996 .

[56]  T Turner,et al.  Structural changes. , 1991, Nursing times.

[57]  Jeff Dahn,et al.  Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni (OH)2 structure , 1990 .