论文信息 - Wireless blood pressure measurement implant electronics for integration in a stent craft

Wireless blood pressure measurement implant electronics for integration in a stent craft

This paper describes the design, implementation and testing of a wireless blood pressure sensing implant. The implant is mounted on a stent graft. The implant along with the stent graft must fit into a 16F applicator stent delivery system. The implant is powered using the energy harvested from wireless power transmission. The measured pressure data is sent wirelessly to an external data reader hardware. The pressure measurement must have resolution of 1 mmHg.

[1] Matthew A. Corriere,et al. Endoleak Following Endovascular Abdominal Aortic Aneurysm Repair: Implications for Duration of Screening , 2004, Annals of surgery.

[2] David C. Yates,et al. Optimal transmission frequency for ultralow-power short-range radio links , 2004, IEEE Transactions on Circuits and Systems I: Regular Papers.

[3] Brian L. Wardle,et al. Implantable Flexible Pressure Measurement System Based on Inductive Coupling , 2015, IEEE Transactions on Biomedical Engineering.

[4] K. Fotopoulou,et al. Wireless Powering of Implanted Sensors using RF Inductive Coupling , 2006, 2006 5th IEEE Conference on Sensors.

[5] Klaus Finkenzeller,et al. RFID Handbook: Radio-Frequency Identification Fundamentals and Applications , 2000 .

[6] Tianjia Sun,et al. Wireless Power Transfer for Medical Microsystems , 2013 .

[7] Dietmar Schroeder,et al. Wireless Power Transmission for Powering Medical Implants Situated in an Abdominal Aortic Aneurysm , 2012 .

[8] Wolfgang Krautschneider,et al. Wireless Power and Data Transmission for a Pressure Sensing Medical Implant , 2010 .