Multi-Objective Optimization of Off-Grid Hybrid Renewable Energy Systems in Buildings with Prior Design-Variable Screening

This work presents an optimization strategy and the cost-optimal design of an off-grid building served by an energy system involving solar technologies, thermal and electrochemical storages. Independently from the multi-objective method (e.g., utility function) and algorithm used (e.g., genetic algorithms), the optimization of this kind of systems is typically characterized by a high-dimensional variables space, computational effort and results uncertainty (e.g., local minimum solutions). Instead of focusing on advanced optimization tools to handle the design problem, the dimension of the full problem has been reduced, only considering the design variables with a high “effect” on the objective functions. An off-grid accommodation building is presented as test case: the original six-variable design problem consisting of about 300,000 possible configurations is reduced to a two-variable problem, after the analysis of 870 Monte Carlo simulations. The new problem includes only 220 possible design alternatives with a clear benefit for the multi-objective optimization algorithm. The energy-economy Pareto frontiers obtained by the original and the reduced problems overlap, showing the validity of the proposed methodology. The No-RES (no renewable energy sources) primary energy consumption can be reduced up to almost 0 kWh/(m2yr) and the net present value (NPV) after 20 years can reach 70 k€ depending on the number of photovoltaic panels and electrochemical storage size. The reduction of the problem also allows for a plain analysis of the results and the drawing of handy decision charts to help the investor/designer in finding the best design according to the specific investment availability and target performances. The configurations on the Pareto frontier are characterized by a notable electrical overproduction and a ratio between the two main design variables that goes from 4 to 8 h. A sensitivity analysis to the unitary price of the electrochemical storage reveals the robustness of the sizing criterion.

[1]  Daniele Testi,et al.  Optimal integrated sizing and operation of a CHP system with Monte Carlo risk analysis for long-term uncertainty in energy demands , 2018 .

[2]  Romano Giglioli,et al.  Stochastic sizing of isolated rural mini-grids, including effects of fuel procurement and operational strategies , 2018 .

[3]  Paolo Conti,et al.  Cost-optimal Sizing of Solar Thermal and Photovoltaic Systems for the Heating and Cooling Needs of a Nearly Zero-energy Building: Design Methodology and Model Description , 2016 .

[4]  B. Ould Bilal,et al.  Optimal design of a hybrid solar–wind-battery system using the minimization of the annualized cost system and the minimization of the loss of power supply probability (LPSP) , 2010 .

[5]  Paolo Conti,et al.  Cost-optimal Sizing of Solar Thermal and Photovoltaic Systems for the Heating and Cooling Needs of a Nearly Zero-Energy Building: The Case Study of a Farm Hostel in Italy☆ , 2016 .

[6]  Yan Su,et al.  Polygeneration systems in buildings: A survey on optimization approaches , 2017 .

[7]  Romano Giglioli,et al.  Optimal sizing of a hybrid mini-grid considering the fuel procurement and a rolling horizon system operation , 2017, 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe).

[8]  T. McGoverna,et al.  Deregulation and restructuring of the global electricity supply industry and its impact upon power plant suppliers , 2004 .

[9]  Bilal Akash,et al.  Medium-range planning economics of future electrical-power generation options , 2004 .

[10]  Mohsen Kalantar,et al.  Dynamic behavior of a stand-alone hybrid power generation system of wind turbine, microturbine, solar array and battery storage , 2010 .

[11]  Jan Carmeliet,et al.  Building energy optimization: An extensive benchmark of global search algorithms , 2019, Energy and Buildings.

[12]  Myung-Hyun Ryou,et al.  Semi-empirical long-term cycle life model coupled with an electrolyte depletion function for large-format graphite/LiFePO 4 lithium-ion batteries , 2017 .

[13]  Paolo Conti,et al.  Synthesis and Optimal Operation of Smart Microgrids Serving a Cluster of Buildings on a Campus with Centralized and Distributed Hybrid Renewable Energy Units , 2019, Energies.

[14]  S. D. Probert,et al.  Sol-air temperature , 1977 .

[15]  J. M. Ngundam,et al.  Simulation of off-grid generation options for remote villages in Cameroon , 2008 .

[16]  Singiresu S. Rao.  Engineering Optimization : Theory and Practice , 2010 .

[17]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[18]  Douglas Lanman,et al.  On sustainable and efficient design of ground-source heat pump systems , 2015 .

[19]  D. Sauer,et al.  Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries , 2014 .

[20]  Mauro Gamberi,et al.  State-of-art review of the optimization methods to design the configuration of hybrid renewable energy systems (HRESs) , 2018, Frontiers in Energy.

[21]  R. P. Saini,et al.  A review on planning, configurations, modeling and optimization techniques of hybrid renewable energy systems for off grid applications , 2016 .

[22]  Francesco D’Ettorre,et al.  Model predictive control of a hybrid heat pump system and impact of the prediction horizon on cost-saving potential and optimal storage capacity , 2019, Applied Thermal Engineering.

[23]  Christos A. Frangopoulos,et al.  Recent developments and trends in optimization of energy systems , 2018, Energy.

[24]  M. Ceraolo,et al.  Cost effective storage for energy saving in feeding systems of tramways , 2014, 2014 IEEE International Electric Vehicle Conference (IEVC).

[25]  Wei Zhou,et al.  Current status of research on optimum sizing of stand-alone hybrid solar–wind power generation systems , 2010 .

[26]  N. Omar,et al.  Lithium iron phosphate based battery: Assessment of the aging parameters and development of cycle life model , 2014 .

[27]  Jacqueline K. Telford,et al.  Optimization by Design of Experiment techniques , 2009, 2009 IEEE Aerospace conference.

[28]  Paolo Conti,et al.  Multi-objective optimization of microclimate in museums for concurrent reduction of energy needs, visitors’ discomfort and artwork preservation risks , 2018, Applied Energy.

[29]  Mohamed Haouari,et al.  Review of optimization techniques applied for the integration of distributed generation from renewable energy sources , 2017 .

[30]  Paolo Conti,et al.  Cost-Benefit Analysis of Hybrid Photovoltaic/Thermal Collectors in a Nearly Zero-Energy Building , 2019, Energies.

[31]  D. L. Evans,et al.  Simplified method for predicting photovoltaic array output , 1980 .

[32]  G. Scelba,et al.  Multicriteria Optimal Sizing of Photovoltaic-Wind Turbine Grid Connected Systems , 2013, IEEE Transactions on Energy Conversion.

[33]  José L. Bernal-Agustín,et al.  Simulation and optimization of stand-alone hybrid renewable energy systems , 2009 .

[34]  Mohd Amran Mohd Radzi,et al.  Multi-objective optimization of a stand-alone hybrid renewable energy system by using evolutionary algorithms: A review , 2012 .