Computational analysis of Savonius wind turbine modifications including novel scooplet-based design attained via smart numerical optimization

Abstract Simple design and low power coefficient of Savonius-style wind turbines make them attractive in experimental and computational fluid dynamics (CFD) based optimization studies. Still, after numerous studies the power coefficient is low, and the single optimal Savonius-style wind turbine shape and configuration is not known. This leaves room for improving the power coefficient, and the objective of this paper is to find an improved solution with application of smart numerical optimization. Several Savonius blade improvements proposed by other researchers were initially analyzed. The numerical (3D CFD) analysis has shown that simple modifications of the blades can be better than more complicated shapes such as spline or elliptical curve. This has encouraged the investigation on what is the limit to the optimized design which used only simple circular-arc based blades. Thus, we perform a global optimization of Savonius blade pair where each pair is composed of two circular arc segments. The smart numerical optimization was performed using 2D CFD and the results were verified and compared with the previous designs using the 3D CFD. The selected optimization operating conditions were tip speed ratio 0.9 and wind speed 12 m/s. The novel optimized design achieved 39% improvement of the maximum power coefficient relative to the classical Savonius design.

[1]  Damir Vučina,et al.  Superimposed RBF and B-spline parametric surface for reverse engineering applications , 2019, Integr. Comput. Aided Eng..

[2]  Ranjan Das,et al.  An inverse method for optimization of geometric parameters of a Savonius-style wind turbine , 2018 .

[3]  Mauro Venturini,et al.  A novel geometry for vertical axis wind turbines based on the Savonius concept , 2017 .

[4]  Stefano Mauro,et al.  2D CFD Modeling of H-Darrieus Wind Turbines Using a Transition Turbulence Model , 2014 .

[5]  Damir Vučina,et al.  Multi-Regime Shape Optimization of Fan Vanes for Energy Conversion Efficiency using CFD, 3D Optical Scanning and Parameterization , 2014 .

[6]  Ujjwal K. Saha,et al.  Performance evaluation of vent-augmented elliptical-bladed savonius rotors by numerical simulation and wind tunnel experiments , 2018, Energy.

[7]  Milan Curkovic,et al.  Adaptive re-parameterization based on arbitrary scalar fields for shape optimization and surface fitting , 2018, Eng. Appl. Artif. Intell..

[8]  João Vicente Akwa,et al.  Discussion on the verification of the overlap ratio influence on performance coefficients of a Savonius wind rotor using computational fluid dynamics , 2012 .

[9]  Yanjun Li,et al.  Shape optimization of a Savonius wind rotor with different convex and concave sides , 2018 .

[10]  Carlos A. Collazos,et al.  A modified novel blade configuration proposal for a more efficient VAWT using CFD tools , 2019, Energy Conversion and Management.

[11]  Herbert Martins Gomes,et al.  An airfoil optimization technique for wind turbines , 2012 .

[12]  Ujjwal K. Saha,et al.  Wind tunnel experiments of a newly developed two-bladed Savonius-style wind turbine , 2015 .

[13]  Milan Curkovic,et al.  Efficient shape parameterization method for multidisciplinary global optimization and application to integrated ship hull shape optimization workflow , 2016, Comput. Aided Des..

[14]  A. J. Alexander,et al.  Wind tunnel tests on a savonius rotor , 1978 .

[15]  Alex Maurício Araújo,et al.  A review on wind turbine control and its associated methods , 2018 .

[16]  Milan Curkovic,et al.  A novel projection of open geometry into rectangular domain for 3D shape parameterization , 2017, Integr. Comput. Aided Eng..

[17]  Milan Curkovic,et al.  Enhanced 3D parameterization for integrated shape synthesis by fitting parameter values to point sets , 2017, Integr. Comput. Aided Eng..

[18]  Omar Yaakob,et al.  An innovative configuration for new marine current turbine , 2018 .

[19]  Bo Li,et al.  A Novel Parametric Modeling Method and Optimal Design for Savonius Wind Turbines , 2017 .

[20]  S. Nižetić,et al.  Analysis and optimization of passive cooling approach for free-standing photovoltaic panel: Introduction of slits , 2020 .

[21]  S. R. Samo,et al.  Performance analysis of a savonius vertical axis wind turbine integrated with wind accelerating and guiding rotor house , 2019, Renewable Energy.

[22]  Ronald W. Yeung,et al.  On the performance of a micro-scale Bach-type turbine as predicted by discrete-vortex simulations , 2016 .

[23]  Damir Vučina,et al.  Numerical models for robust shape optimization of wind turbine blades , 2016 .

[24]  Nobuyuki Fujisawa,et al.  Experimental Study on the Aerodynamic Performance of a Savonius Rotor , 1994 .

[25]  Damir Vučina,et al.  Concept of flexible vertical-axis wind turbine with numerical simulation and shape optimization , 2019 .

[26]  C. Chan,et al.  Positive interactions of two Savonius-type vertical-axis wind turbines for performance improvement , 2019, Energy Procedia.

[27]  B. Blocken,et al.  On the accuracy of turbulence models for CFD simulations of vertical axis wind turbines , 2019, Energy.

[28]  Ujjwal K. Saha,et al.  Aerodynamic Performance Evaluation of a Novel Savonius-Style Wind Turbine Under an Oriented Jet , 2014 .

[29]  B. Blocken,et al.  Towards accurate CFD simulations of vertical axis wind turbines at different tip speed ratios and solidities: Guidelines for azimuthal increment, domain size and convergence , 2018 .

[30]  Agis M. Papadopoulos,et al.  Smart technologies for promotion of energy efficiency, utilization of sustainable resources and waste management , 2019, Journal of Cleaner Production.

[31]  Mats Leijon,et al.  Evaluation of different turbine concepts for wind power , 2008 .

[32]  Rajesh Patel,et al.  Layout optimization of a wind farm to maximize the power output using enhanced teaching learning based optimization technique , 2017 .

[33]  B. F. Blackwell,et al.  Wind tunnel performance data for two- and three-bucket Savonius rotors , 1978 .

[34]  Sandro Nižetić,et al.  Solar plant with short diffuser concept: Further improvement of numerical model by included influence of guide vane topology on shape and stability of gravitational vortex , 2019, Journal of Cleaner Production.

[35]  Grzegorz Liskiewicz,et al.  Numerical investigation of conventional and modified Savonius wind turbines , 2013 .

[36]  M. A. Kamoji,et al.  Experimental investigations on single stage modified Savonius rotor , 2009 .

[37]  Sandro Nižetić,et al.  Contribution to the research of an alternative energy concept for carbon free electricity production: Concept of solar power plant with short diffuser , 2017 .

[38]  Jonna Tiainen,et al.  Experimental and analytical analysis of vaned savonius turbine performance under different operating conditions , 2019, Applied Energy.

[39]  Rajesh Kumar Sharma,et al.  Performance improvement of Savonius rotor using multiple quarter blades – A CFD investigation , 2016 .

[40]  Paolo Schito,et al.  CFD study of Savonius wind turbine: 3D model validation and parametric analysis , 2017 .

[41]  Mojtaba Tahani,et al.  Optimization of airfoil Based Savonius wind turbine using coupled discrete vortex method and salp swarm algorithm , 2019, Journal of Cleaner Production.

[42]  Agis M. Papadopoulos,et al.  Experimental and numerical investigation of a backside convective cooling mechanism on photovoltaic panels , 2016 .

[43]  Damir Vučina,et al.  Numerical workflow for 3d shape optimization and synthesis of vertical-axis wind turbines for specified operating regimes , 2016 .