2.16 – Composite Processing and Manufacturing—An Overview

[1]  J. K. Gillham,et al.  Time–temperature–transformation (TTT) cure diagram: Modeling the cure behavior of thermosets , 1983 .

[2]  Jan-Anders E. Månson,et al.  Impregnation technology for thermoplastic matrix composites , 1992 .

[3]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[4]  Jan-Anders E. Månson,et al.  Prediction of Process-Induced Residual Stresses in Thermoplastic Composites , 1990 .

[5]  J. K. Gillham,et al.  Competition between cure and thermal degradation in a high Tg epoxy system: Effect of time and temperature of isothermal cure on the glass transition temperature , 1990 .

[6]  Adrian E. Scheidegger,et al.  The physics of flow through porous media , 1957 .

[7]  J. Månson,et al.  Process Simulated Laminate (PSL) : A Methodology to Internal Stress Characterization in Advanced Composite Materials , 1992 .

[8]  C. Ma,et al.  Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part I. Correlation of processing parameters for optimizing the process , 1991 .

[9]  E. Silverman.  Effect of glass fiber length on the creep and impact resistance of reinforced thermoplastics , 1987 .

[10]  J. Månson,et al.  Press‐forming of continuous‐fiber‐reinforced thermoplastic composites , 1990 .

[11]  Timothy G. Gutowski,et al.  Development of a theoretical cost model for advanced composite fabrication , 1994 .

[12]  K. N. Kendall,et al.  Discrete event simulation and cost analysis for manufacturing optimisation of an automotive LCM component , 1998 .

[13]  Rodney Hill,et al.  Theory of mechanical properties of fibre-strengthened materials—III. self-consistent model , 1965 .

[14]  C. Barret.  Launch vehicle flight control augmentation using smart materials and advanced composites (CDDF Project 93-05) , 1995 .

[15]  R. J. Crawford,et al.  The ‘design for manufacture’ of continuous fibre-reinforced thermoplastic products in primary aircraft structure , 1995 .

[16]  S. K. Chaturvedi,et al.  Complex moduli of aligned discontinuous fibre-reinforced polymer composites , 1982 .

[17]  Zvi Hashin,et al.  On elastic behaviour of fibre reinforced materials of arbitrary transverse phase geometry , 1965 .

[18]  Material response of a semicrystalline thermoplastic polymer and composite in relation to process cooling history , 1992 .

[19]  Jan-Anders E. Månson,et al.  Integrated processing of thermoplastic composites , 1998 .

[20]  Wen-Si Wang,et al.  The development of glass fiber reinforced polystyrene for pultrusion. I : Process feasibility, dynamic mechanical properties, and postformability , 1998 .

[21]  L. Ye,et al.  Interlaminar fracture of commingled-fabric-based GF/PET composites , 1993 .