Optimization of adhesion of poly lactic acid 3D printed onto polyethylene terephthalate woven fabrics through modelling using textile properties
暂无分享,去创建一个
Xianyi Zeng | Aurélie Cayla | Vincent Nierstrasz | Jinping Guan | Yan Chen | Xianyi Zeng | V. Nierstrasz | A. Cayla | C. Campagne | Jinping Guan | Christine Campagne | Yan Chen | Prisca Aude Eutionnat-Diffo | P. Eutionnat-Diffo
[1] A. Akbarzadeh,et al. Roll bonding of AA5052 and polypropylene sheets: Bonding mechanisms, microstructure and mechanical properties , 2017 .
[2] B. Pourdeyhimi,et al. Polymer adhesion in heat-treated nonwovens , 2018 .
[3] Xianyi Zeng,et al. Stress, strain and deformation of poly-lactic acid filament deposited onto polyethylene terephthalate woven fabric through 3D printing process , 2019, Scientific Reports.
[4] Libo Yan,et al. Flax fibre and its composites – A review , 2014 .
[5] A. Nanci,et al. Surface nanoporosity has a greater influence on osteogenic and bacterial cell adhesion than crystallinity and wettability , 2018, Applied Surface Science.
[6] A. S. Luyt,et al. Physical–morphological and chemical changes leading to an increase in adhesion between plasma treated polyester fibres and a rubber matrix , 2006 .
[7] S. H. Tomadi,et al. Surface Modification on CoCrMo Alloy to Improve the Adhesion Strength of Hydroxyapatite Coating , 2017 .
[8] C. Mazzotti,et al. Influence of mechanical properties, anisotropy, surface roughness and porosity of brick on FRP debonding force , 2017 .
[9] Yang Ju,et al. State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction , 2017, Science China Technological Sciences.
[10] I. Tavman,et al. Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials , 2013 .
[11] Fan Yang,et al. Preparation of carbon fiber unsaturated sizing agent for enhancing interfacial strength of carbon fiber/vinyl ester resin composite , 2018 .
[12] Melkie Getnet Tadesse,et al. 3D Printing of NinjaFlex Filament onto PEDOT:PSS-Coated Textile Fabrics for Electroluminescence Applications , 2018, Journal of Electronic Materials.
[13] R. H. Sanatgar,et al. Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters , 2017 .
[14] Andrea Ehrmann,et al. Influence of fabric pretreatment on adhesion of three-dimensional printed material on textile substrates , 2018, Advances in Mechanical Engineering.
[15] Zhong Chen,et al. Understanding the bonding mechanisms of directly sputtered copper thin film on an alumina substrate , 2017 .
[16] G. Sorial,et al. Inhibition of biofilm growth on polymer-MWCNTs composites and metal surfaces. , 2018, The Science of the total environment.
[17] Clemens Holzer,et al. Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication , 2018 .
[18] B Mahltig,et al. Possible Applications of 3D Printing Technology on Textile Substrates , 2016 .
[19] J. Lee,et al. Critical factors on manufacturing processes of natural fibre composites , 2012 .
[20] P. G. Patil,et al. Submicron surface roughening of aliphatic polyamide 6,6 fabric through low temperature plasma and its effect on interfacial bonding in rubber composite , 2018 .
[21] A. Kashani,et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.
[22] H. Fischer,et al. Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eucalyptus globulus lignin , 2014 .
[23] M. Ibrahim,et al. Melt Flow Behavior of Polymer Matrix Extrusion for Fused Deposition Modeling (FDM) , 2014 .
[24] M. Stommel,et al. Influence of surface roughness on the shear strength of direct injection molded plastic-aluminum hybrid-parts , 2018 .
[25] Andrea Ehrmann,et al. Adhesion of 3D printing polymers on textile fabrics for garment production , 2018, IOP Conference Series: Materials Science and Engineering.
[26] Jack G. Zhou,et al. Investigating the shape memory properties of 4D printed polylactic acid (PLA) and the concept of 4D printing onto nylon fabrics for the creation of smart textiles , 2017 .
[27] I. Ashcroft,et al. Characterization of a novel natural cellulose fabric from Manicaria saccifera palm as possible reinforcement of composite materials , 2015 .
[28] Andrea Ehrmann,et al. Adhesion of 3D printed material on textile substrates , 2017 .
[29] Esra Karaca,et al. Effects of Fiber Cross Sectional Shape and Weave Pattern on Thermal Comfort Properties of Polyester Woven Fabrics , 2012 .
[30] A. A. El-Saftawy,et al. Electron beam irradiation impact on surface structure and wettability of ethylene-vinyl alcohol copolymer , 2018, Radiation Physics and Chemistry.
[31] Siamak Saharkhiz,et al. Surface Roughness Evaluation of Textile Fabrics: A Literature Review , 2014 .