Advances in Sheet Forming—Materials Modeling, Numerical Simulation, and Press Technologies

[1]  J. Leblond,et al.  Effect of void locking by inclusions upon the plastic behavior of porous ductile solids¿I: theoretical modeling and numerical study of void growth , 2004 .

[2]  Reiner Kopp,et al.  Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks , 2006 .

[3]  Kwansoo Chung,et al.  Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: Part II: characterization of material properties , 2005 .

[4]  W. Hosford,et al.  Metal Forming: Mechanics and Metallurgy , 1993 .

[5]  Hans-Åke Häggblad,et al.  Modelling and simulation of metal powder die pressing with use of explicit time integration , 1994 .

[6]  Frédéric Barlat,et al.  An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals , 2008 .

[7]  R. E. Dick,et al.  Plane stress yield function for aluminum alloy sheets—part II: FE formulation and its implementation , 2004 .

[8]  A. Makinouchi,et al.  Contact strategies to deal with different tool descriptions in static explicit FEM for 3-D sheet-metal forming simulation , 1995 .

[9]  Franz Dieter Fischer,et al.  Transformation-Induced Plasticity (TRIP) , 1996 .

[10]  M. E. Kassner,et al.  Creep cavitation in metals , 2003 .

[11]  R. E. Dick,et al.  Plane stress yield functions for aluminum alloy sheets , 2002 .

[12]  A. Erman Tekkaya,et al.  State-of-the-art of simulation of sheet metal forming , 2000 .

[13]  V. Tvergaard.  On localization in ductile materials containing spherical voids , 1982, International Journal of Fracture.

[14]  William F. Hosford,et al.  Sheet metal forming: A review , 1999 .

[15]  Jacques Besson,et al.  A yield function for anisotropic materials Application to aluminum alloys , 2004 .

[16]  D. M. Woo.  On the complete solution of the deep-drawing problem , 1968 .

[17]  Manabu Gotoh,et al.  A finite element analysis of rigid-plastic deformation of the flange in a deep-drawing process based on a fourth-degree yield function , 1978 .

[18]  Shen R. Wu,et al.  Lumped mass matrix in explicit finite element method for transient dynamics of elasticity , 2006 .

[19]  Thomas J. R. Hughes,et al.  Nonlinear finite element analysis of shells: Part I. three-dimensional shells , 1981 .

[20]  Kwansoo Chung,et al.  Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions , 2005 .

[21]  Jacek Skrzypek,et al.  Modeling of Material Damage and Failure of Structures: Theory And Applications , 1998 .

[22]  Jean-Louis Chaboche,et al.  Continuous damage mechanics — A tool to describe phenomena before crack initiation☆ , 1981 .

[23]  Thomas Pardoen,et al.  An extended model for void growth and coalescence - application to anisotropic ductile fracture , 2000 .

[24]  Frédéric Barlat,et al.  An alternative to kinematic hardening in classical plasticity , 2011 .

[25]  Frédéric Barlat,et al.  Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function , 2006 .

[26]  U. F. Kocks.  Laws for Work-Hardening and Low-Temperature Creep , 1976 .

[27]  R. Hill.  Constitutive dual potentials in classical plasticity , 1987 .

[28]  N. Ohno,et al.  Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior , 1993 .

[29]  A. Tekkaya,et al.  A review on hot stamping , 2010 .

[30]  F. Barlat,et al.  Strain rate potential for metals and its application to minimum plastic work path calculations , 1993 .

[31]  Yannis F. Dafalias,et al.  Plastic Internal Variables Formalism of Cyclic Plasticity , 1976 .

[32]  M. Puso,et al.  A 3D contact smoothing method using Gregory patches , 2002 .

[33]  Kozo Osakada,et al.  Reduction of friction in compression of plates by load pulsation , 2011 .

[34]  W. Hosford,et al.  Twinning and directional slip as a cause for a strength differential effect , 1973 .

[35]  Kwansoo Chung,et al.  Spring-back evaluation of automotive sheets based on isotropic–kinematic hardening laws and non-quadratic anisotropic yield functions, part III: applications , 2005 .

[36]  S.-D. Liu,et al.  Techniques to Improve Springback Prediction Accuracy Using Dynamic Explicit FEA Codes , 2002 .

[37]  S. Wang,et al.  The inside–outside contact search algorithm for finite element analysis , 1997 .

[38]  P. Thomason,et al.  Ductile Fracture of Metals , 1990 .

[39]  Jeong Whan Yoon,et al.  On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming , 2008 .

[40]  K. Roll.  Advanced Simulation Techniques - Exceeding Reality? , 2007 .

[41]  Jianxiang Wang,et al.  Nonlinear Mechanics of Solids Containing Isolated Voids , 2006 .

[42]  Jerry I. Lin,et al.  Explicit algorithms for the nonlinear dynamics of shells , 1984 .

[43]  C. O. Frederick,et al.  A mathematical representation of the multiaxial Bauschinger effect , 2007 .

[44]  Jue Wang,et al.  A practical large‐strain solid finite element for sheet forming , 2005 .

[45]  F. Barlat,et al.  Elastic-viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test , 2007 .

[46]  F. Barlat,et al.  A six-component yield function for anisotropic materials , 1991 .

[47]  W. Prager,et al.  A NEW METHOD OF ANALYZING STRESSES AND STRAINS IN WORK - HARDENING PLASTIC SOLIDS , 1956 .

[48]  Abdalla S. Wifi,et al.  An incremental complete solution of the stretch-forming and deep-drawing of a circular blank using a hemispherical punch , 1976 .

[49]  Nobuhiro Koga,et al.  Reduction in Blanking Noise Using NC Servo Press Machine , 2010 .

[50]  A. P. Karafillis,et al.  A general anisotropic yield criterion using bounds and a transformation weighting tensor , 1993 .

[51]  J. Leblond,et al.  Effect of void locking by inclusions upon the plastic behavior of porous ductile solids¿part II: theoretical modeling and numerical study of void coalescence , 2004 .

[52]  Frédéric Barlat,et al.  Continuum Scale Simulation of Engineering Materials Fundamentals - Microstructures - Process Applications , 2004 .

[53]  F. Barlat,et al.  Plane stress yield function for aluminum alloy sheets—part 1: theory , 2003 .

[54]  Robert H. Wagoner,et al.  Improved contact procedure for implicit finite element sheet forming simulation , 2010 .

[55]  Fusahito Yoshida,et al.  Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain , 2002 .

[56]  Bart Peeters,et al.  Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths , 2001 .

[57]  G.L. Goudreau.  Computational structural mechanics. From national defense to national resource , 1994, IEEE Computational Science and Engineering.

[58]  R. H. Wagoner,et al.  Simulation of springback , 2002 .

[59]  Frédéric Barlat,et al.  Orthotropic yield criterion for hexagonal closed packed metals , 2006 .

[60]  R. H. Wagoner,et al.  Role of plastic anisotropy and its evolution on springback , 2002 .

[61]  Frédéric Barlat,et al.  A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals , 2004 .

[62]  Frédéric Barlat,et al.  Linear transfomation-based anisotropic yield functions , 2005 .

[63]  Frédéric Barlat,et al.  Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: Part I: theory and formulation , 2005 .

[64]  P. Wriggers,et al.  Smooth C1‐interpolations for two‐dimensional frictional contact problems , 2001 .

[65]  R. D. Krieg.  A Practical Two Surface Plasticity Theory , 1975 .

[66]  S. Kobayashi,et al.  Finite Element Process Modeling of Sheet Metal Forming of General Shapes , 1983 .

[67]  J. K. Lee,et al.  Modeling the Bauschinger effect for sheet metals, part I: theory , 2002 .

[68]  B. Bacroix,et al.  On plastic potentials for anisotropic metals and their derivation from the texture function , 1991 .

[69]  D. Imbault,et al.  A fourth-order plastic potential for anisotropic metals and its analytical calculation from the texture function , 1994 .

[70]  Gerhard A. Holzapfel,et al.  Cn continuous modelling of smooth contact surfaces using NURBS and application to 2D problems , 2003 .

[71]  Frédéric Barlat,et al.  Characterization and modeling of the mechanical behavior and formability of a 2008-T4 sheet sample , 1989 .

[72]  Mao-Hong Yu,et al.  Advances in strength theories for materials under complex stress state in the 20th Century , 2002 .

[73]  Hans-Werner Ziegler.  A Modification of Prager's Hardening Rule , 1959 .

[74]  J. Chaboche.  Time-independent constitutive theories for cyclic plasticity , 1986 .

[75]  Eugene W. Myers,et al.  Whole-genome DNA sequencing , 1999, Comput. Sci. Eng..

[76]  R. Hill,et al.  XLVI. A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. , 1951 .

[77]  Frédéric Barlat,et al.  Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate , 2007 .

[78]  F. Barlat,et al.  Anisotropic potentials for plastically deforming metals , 1993 .

[79]  P. Van Houtte,et al.  Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials , 1994 .

[80]  Bernard Budiansky,et al.  Analysis of Sheet Metal Stamping by a Finite-Element Method , 1978 .

[81]  Surya R. Kalidindi,et al.  Strain hardening due to deformation twinning in α-titanium : Constitutive relations and crystal-plasticity modeling , 2005 .

[82]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[83]  Alf Andersson,et al.  SIMULATION AND VERIFICATION OF DIFFERENT PARAMETERS EFFECT ON SPRINGBACK RESULTS , 2002 .