论文信息 - Theoretical Analysis of an Original Rotary Machine

Theoretical Analysis of an Original Rotary Machine

In this study an original analysis of the geometric design of a particular internal rotary machine and an investigation on its theoretical performances are presented. The first part of the work is focused on the geometry of the machine, characterized by more complex rotor profiles compared with the classical epitrochoidal pumps. Suitable parameters are pointed out to completely define the geometry of the machine. In the second part of the study, proper indices are set and evaluated as functions of the design parameters, in order to evaluate the performance of the machine. Finally a specific configuration of the considered pump is compared with the conventional trochoidal pumps in terms of flow-rate indices. The analysis performed allows one to highlight the basic advantages and drawbacks of this original design in comparison with the classical trochoidal profiles and can be used as a basis for CAD/CAE (Computer-Aided Design and Engineering) or experimental studies.

[1] Faydor L. Litvin,et al. Design and simulation of meshing of a cycloidal pump , 2002 .

[2] Jia Yan,et al. A New Gerotor Design Method With Switch Angle Assignability , 2009 .

[3] Werner Soedel,et al. Comparison of Hypotrochoidal and Epitrochoidal Gerotors , 1991 .

[4] Giovanni Mimmi,et al. Toward computerized determination of envelope to family of parametric planar curves , 2009 .

[5] J. R. Colbourne. Gear Shape and Theoretical Flow Rate in Internal Gear Pumps , 1975 .

[6] Paolo Pennacchi,et al. INTERNAL LOBE PUMP DESIGN , 1997 .

[7] Faydor L. Litvin,et al. Computerized design and generation of cycloidal gearings , 1996 .

[8] Chiu-Fan Hsieh,et al. Geometric Design Using Hypotrochoid and Nonundercutting Conditions for an Internal Cycloidal Gear , 2007 .

[9] F. Litvin,et al. Gear geometry and applied theory , 1994 .

[10] R. Gras,et al. Teeth clearance effects upon pressure and film thickness in a trochoidal hydrostatic gear pump , 2004 .

[11] Chiu-Fan Hsieh,et al. Geometric Design for a Gerotor Pump With High Area Efficiency , 2007 .

[12] Paolo Pennacchi,et al. Non Undercutting Conditions in Internal Gears , 2000 .

[13] Giovanni Mimmi,et al. Theoretical analysis of internal epitrochoidal and hypotrochoidal machines , 2009 .

[14] Gordon R. Pennock,et al. The effects of the generating pin size and placement on the curvature and displacement of epitrochoidal gerotors , 1992 .