Finite element modeling of low speed reaming vibrations with reamer geometry modifications
暂无分享,去创建一个
Kamran Behdinan | Shahrzad Towfighian | Ziad Saghir | Paul Zalzal | Marcello Papini | Justin de Beer
[1] R. Sridhar,et al. A Stability Algorithm for the General Milling Process: Contribution to Machine Tool Chatter Research—7 , 1968 .
[2] Keith A. Young,et al. Theory of Torsional Chatter in Twist Drills: Model, Stability Analysis and Composition to Test , 2001 .
[3] R. Sridhar,et al. A General Formulation of the Milling Process Equation: Contribution to Machine Tool Chatter Research—5 , 1968 .
[4] H. Kiyota,et al. Hole accuracy with carbide-tipped reamers (2nd report): effect of alignment error of pre-bored hole on reaming action , 1986 .
[5] Daryl L. Logan,et al. First Course in the Finite Element Method Using Algor , 1997 .
[6] Y. K. Cheung,et al. Finite Element Methods in Dynamics , 1992 .
[7] S. A. Tobias. Machine-tool vibration , 1965 .
[8] Keith A. Young,et al. Analysis of Tool Oscillation and Hole Roundness Error in a Quasi-Static Model of Reaming , 2001 .
[9] Keizo Sakuma,et al. Hole Accuracy with Carbide-tipped Reamers (1st Report) , 1982 .
[10] Sean G. Calvert,et al. Low-Frequency Regenerative Vibration and the Formation of Lobed Holes in Drilling , 2002 .
[11] Yusuf Altintas,et al. Analytical Prediction of Stability Lobes in Milling , 1995 .
[12] Robert I. King,et al. Handbook of High-Speed Machining Technology , 1986 .