Active fault diagnosis for uncertain systems using optimal test designs and detection through classification.

Fault detection and isolation (FDI) is becoming increasingly difficult due to the complexity and uncertainty of modern systems. For industrial systems with explicit models available, model-based active FDI tests can improve the capability for fault diagnosis. These tests should be determined and evaluated prior to implementation to minimize on-site computational costs. In this paper, a methodology is presented for the design optimization and assessment of tests for active fault diagnosis. The objective is to maximize the information from system outputs with respect to faults while minimizing the correlation between faults and uncertainty. After a test is designed, it is deployed with a k-nearest neighbor algorithm combined with principal component analysis.Two case studies are used to verify the proposed methodology, a three-tank system and a diesel engine.

[1]  Davide Martino Raimondo,et al.  Active fault diagnosis: A multi-parametric approach , 2017, Autom..

[2]  Seyedmojtaba Tabatabaeipour.  Active fault detection and isolation of discrete-time linear time-varying systems: a set-membership approach , 2015, Int. J. Syst. Sci..

[3]  Erik Frisk,et al.  A method for quantitative fault diagnosability analysis of stochastic linear descriptor models , 2013, Autom..

[4]  Ivo Punčochář,et al.  Input Design for Fault Detection Using Extended Kalman Filter and Reinforcement Learning , 2017 .

[5]  Shalabh Gupta,et al.  Optimal Sensor Selection and Fusion for Heat Exchanger Fouling Diagnosis in Aerospace Systems , 2016, IEEE Sensors Journal.

[6]  Miroslav Simandl,et al.  Active fault detection and control: Unified formulation and optimal design , 2009, Autom..

[7]  Richard D. Braatz,et al.  Optimum input design for fault detection and diagnosis: Model-based prediction and statistical distance measures , 2013, 2013 European Control Conference (ECC).

[8]  Holger Dette,et al.  E-optimal designs for the Michaelis–Menten model , 1999 .

[9]  K. Chaloner,et al.  Bayesian Experimental Design: A Review , 1995 .

[10]  Friedrich Pukelsheim,et al.  E-Optimal Designs for Polynomial Regression , 1993 .

[11]  William T. Hale,et al.  Optimal design of tests for heat exchanger fouling identification , 2016 .

[12]  Steven X. Ding,et al.  Model-based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools , 2008 .

[13]  J. Ragot,et al.  Parameter estimation for uncertain systems based on fault diagnosis using Takagi-Sugeno model. , 2015, ISA transactions.

[14]  Didier Maquin,et al.  Fault detection observers for systems with unknown inputs , 1994 .

[15]  Hector Budman,et al.  Integration of fault diagnosis and control based on a trade-off between fault detectability and closed loop performance , 2016 .

[16]  George M. Bollas,et al.  Model‐based analysis of chemical‐looping combustion experiments. Part II: Optimal design of CH4‐NiO reduction experiments , 2016 .

[17]  Hans Henrik Niemann.  ACTIVE FAULT DIAGNOSIS IN CLOSED-LOOP UNCERTAIN SYSTEMS , 2006 .

[18]  William T. Hale,et al.  Active Fault Identification by Optimization of Test Designs , 2019, IEEE Transactions on Control Systems Technology.

[19]  Raghunathan Rengaswamy,et al.  A review of process fault detection and diagnosis: Part I: Quantitative model-based methods , 2003, Comput. Chem. Eng..

[20]  Masayuki Tamura,et al.  A study on the number of principal components and sensitivity of fault detection using PCA , 2007, Comput. Chem. Eng..

[21]  Kyle A. Palmer,et al.  Analysis of transient data in test designs for active fault detection and identification , 2019, Comput. Chem. Eng..

[22]  Lei Wang,et al.  Modified kernel principal component analysis using double-weighted local outlier factor and its application to nonlinear process monitoring. , 2017, ISA transactions.

[23]  Stephen L. Campbell,et al.  Effects of feedback on active fault detection , 2012, Autom..

[24]  Yingying Tan,et al.  Enhanced chiller fault detection using Bayesian network and principal component analysis , 2018, Applied Thermal Engineering.

[25]  Lei Xie,et al.  Structured Joint Sparse Principal Component Analysis for Fault Detection and Isolation , 2019, 2018 IEEE 7th Data Driven Control and Learning Systems Conference (DDCLS).

[26]  Raghunathan Rengaswamy,et al.  A review of process fault detection and diagnosis: Part II: Qualitative models and search strategies , 2003, Comput. Chem. Eng..

[27]  M. Kulahci,et al.  On the structure of dynamic principal component analysis used in statistical process monitoring , 2017 .

[28]  Stefan Streif,et al.  Active Fault Diagnosis for Nonlinear Systems with Probabilistic Uncertainties , 2014 .

[29]  A. Willsky,et al.  Analytical redundancy and the design of robust failure detection systems , 1984 .

[30]  Payman Hajihosseini,et al.  Fault detection and isolation in the challenging Tennessee Eastman process by using image processing techniques. , 2018, ISA transactions.

[31]  Sahibsingh A. Dudani.  The Distance-Weighted k-Nearest-Neighbor Rule , 1976, IEEE Transactions on Systems, Man, and Cybernetics.

[32]  Ramine Nikoukhah,et al.  Guaranteed Active Failure Detection and Isolation for Linear Dynamical Systems , 1998, Autom..

[33]  Mattias Nyberg,et al.  Model based diagnosis of the air path of an automotive diesel engine , 2001 .

[34]  H. Hotelling.  Analysis of a complex of statistical variables into principal components. , 1933 .

[35]  Chen Jing,et al.  Fault detection based on a robust one class support vector machine , 2014, Neurocomputing.

[36]  C. Gennings,et al.  Penalized locally optimal experimental designs for nonlinear models , 2008 .

[37]  Niels Kjølstad Poulsen,et al.  Active Fault Diagnosis in Sampled-data Systems , 2015 .

[38]  M. Simandl,et al.  Rolling horizon for active fault detection , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[39]  Saltelli Andrea,et al.  Global Sensitivity Analysis: The Primer , 2008 .

[40]  Bin Jiang,et al.  An improved incipient fault detection method based on Kullback-Leibler divergence. , 2018, ISA transactions.

[41]  Richard D. Braatz,et al.  Input design for guaranteed fault diagnosis using zonotopes , 2014, Autom..

[42]  Chenglin Wen,et al.  Fault Isolation Based on k-Nearest Neighbor Rule for Industrial Processes , 2016, IEEE Transactions on Industrial Electronics.

[43]  Brian C. Williams,et al.  Active Estimation for Jump Markov Linear Systems , 2008, IEEE Transactions on Automatic Control.

[44]  J. Banga,et al.  Structural Identifiability of Systems Biology Models: A Critical Comparison of Methods , 2011, PloS one.

[45]  Boris Rohaľ-Ilkiv,et al.  Mass flow estimation with model bias correction for a turbocharged Diesel engine , 2014 .

[46]  Ashkan Moosavian,et al.  Comparison of Two Classifiers; K-Nearest Neighbor and Artificial Neural Network, for Fault Diagnosis on a Main Engine Journal-Bearing , 2013 .

[47]  George M. Bollas,et al.  Model‐based analysis of chemical‐looping combustion experiments. Part I: Structural identifiability of kinetic models for NiO reduction , 2016 .

[48]  Jian Han,et al.  Fault detection for high-order multi-agent systems with disturbances , 2015, The 27th Chinese Control and Decision Conference (2015 CCDC).

[49]  Niels Kjølstad Poulsen,et al.  Active Fault Diagnosis Based on Stochastic Tests , 2008, Int. J. Appl. Math. Comput. Sci..

[50]  Lina Bertling Tjernberg,et al.  An Artificial Neural Network Approach for Early Fault Detection of Gearbox Bearings , 2015, IEEE Transactions on Smart Grid.

[51]  Miroslav Simandl,et al.  Constrained Active Fault Detection and Control , 2015, IEEE Transactions on Automatic Control.

[52]  L. Petzold,et al.  Numerical methods and software for sensitivity analysis of differential-algebraic systems , 1986 .

[53]  Sandro Macchietto,et al.  Novel anticorrelation criteria for model‐based experiment design: Theory and formulations , 2008 .

[54]  Lars Eriksson,et al.  Modelling diesel engines with a variable-geometry turbocharger and exhaust gas recirculation by optimization of model parameters for capturing non-linear system dynamics , 2011 .

[55]  Raghunathan Rengaswamy,et al.  A review of process fault detection and diagnosis: Part III: Process history based methods , 2003, Comput. Chem. Eng..

[56]  Richard D. Braatz,et al.  Active fault diagnosis using moving horizon input design , 2013, 2013 European Control Conference (ECC).

[57]  Murat Kulahci,et al.  Real-time fault detection and diagnosis using sparse principal component analysis , 2017, Journal of Process Control.

[58]  Xue Jun Zhang,et al.  Auxiliary Signal Design in Fault Detection and Diagnosis , 1989 .

[59]  Maciej Patan,et al.  Optimal observation strategies for model-based fault detection in distributed systems , 2005 .

[60]  Rolf Isermann,et al.  Supervision, fault-detection and fault-diagnosis methods — An introduction , 1997 .