Digital control of a single-stage single-switch flyback PFC AC/DC converter with fast dynamic response

This paper presents the DSP control of single-stage single-switch (S4) flyback AC-DC converter with fast output voltage regulation. Active current shaping technique using flyback AC-to-DC converter has been employed for the power factor control and DC voltage regulation. The proposed control scheme possesses the following characteristics: high power factor, fast regulation of the output DC voltage, high efficiency, low cost, galvanic isolation, and the most important is that all the control functions are realized by using software control which provides great flexibility for system modification and applications. An adaptive voltage ripple estimator has been proposed to compensate the measured DC-link voltage ripples. The proposed control scheme for the S4-PFC flyback converter was realized by using a single-chip DSP controller. Simulations and experimental results have been given to illustrate the performance of the implemented DSP-controlled PFC converter.

[1]  Simon Wall,et al.  Fast controller design for single-phase power-factor correction systems , 1997, IEEE Trans. Ind. Electron..

[2]  D. L. Cooper.  Standardization of specifications for distributed power converter modules , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[3]  R. D. Jackson,et al.  Large signal models and control design for high power-factor preconditioners , 2002 .

[4]  Fred C. Lee,et al.  A general technique for derivation of average current mode control laws for single-phase power-factor-correction circuits without input voltage sensing , 1999 .

[5]  B. R. Mower.  SSI: building compliant power elements for servers , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).

[6]  J. B. Williams,et al.  Design of feedback loop in unity power factor AC to DC converter , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[7]  Fred C. Lee,et al.  Characterization of an active clamp flyback topology for power factor correction applications , 1996 .

[8]  K. Natarajan,et al.  Control of power factor correcting boost converter without instantaneous measurement of input current , 1995 .

[9]  George C. Verghese,et al.  An adaptive digital controller for a unity power factor converter , 1996 .

[10]  J. Sebastian,et al.  An overview of power factor correction in single-phase off-line power supply systems , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[11]  K. Mahabir,et al.  Linear averaged and sampled data models for large signal control of high power factor AC-DC converters , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[12]  Y. S. Lee,et al.  Single-switch fast-response switching regulators with unity power factor , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[13]  George C. Verghese,et al.  Fast controller for a unity-power-factor PWM rectifier , 1996 .

[14]  Oscar Garcia,et al.  A new family of single stage AC/DC power factor correction converters with fast output voltage regulation , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[15]  Keyue Smedley,et al.  A topology survey of single-stage power factor corrector with a boost type input-current-shaper , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[16]  B. Christiansen,et al.  Servers, workstations, personal computers: the looming power bottleneck , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).