Utilization of coir fiber in multilayer acoustic absorption panel

Coconut is one of the most important harvests in Malaysia. Industrial prepared coir fiber is obtained from coconut husk combined with latex and other additives to enhance its structural characteristics. Unfortunately, such inevitable process diminishes the acoustical features of material. Previous studies on industrial coir fiber and fiber–air gap layers showed that low frequency absorptions needed improvements. Therefore perforated plate (PP) was added to the multilayer structure to further enhance the sound absorption in this area. Analyses were accomplished through three PP modeling approaches (Allard, Beranek and Ver, Atalla and Sgard) and Allard Transfer Function (TF) method. Experiments were conducted in impedance tube to support the analytical results. Outcomes showed that Allard TF method was generally closer to measurement values and implemented for additional analyses. Two possible conditions of putting PP in front of fiber layer or between fiber–air gap layers were investigated. Both arrangements were suitable to enhance the sound absorption. Although, when PP was backed by coir fiber and air gap, porosity of the plate had great influence in adjusting the amount of low frequency absorption. Result derived that PP might improve the low frequency absorption of coir fiber but at the same time the medium frequency absorption was reduced. This effect was noticed previously in coir fiber–air gap structures while the air gap thickness increased. The advantage of using PP was that it assisted in greatly reducing the air gap thickness under the same acoustical performance. Hence it is an efficient tool to reduce the thickness of acoustic isolators in practical purposes.

[1]  K. O. Ballagh,et al.  Acoustical properties of wool , 1996 .

[2]  Masayuki Morimoto,et al.  A pilot study on improving the absorptivity of a thick microperforated panel absorber , 2008 .

[3]  R. H. Bolt,et al.  Absorption Characteristics of Acoustic Material with Perforated Facings , 1951 .

[4]  Xiaojun Qiu,et al.  A note on the prediction method of reverberation absorption coefficient of double layer micro-perforated membrane , 2006 .

[5]  R. H. Bolt,et al.  On the Design of Perforated Facings for Acoustic Materials , 1947 .

[6]  J. F. Allard,et al.  Propagation of sound in porous media , 1993 .

[7]  H. V. Fuchs,et al.  PREDICTING THE ABSORPTION OF OPEN WEAVE TEXTILES AND MICRO-PERFORATED MEMBRANES BACKED BY AN AIR SPACE , 1999 .

[8]  Dong-Kyung Lee,et al.  Estimation of the absorption performance of multiple layer perforated panel systems by transfer matrix method , 2004 .

[9]  Kuo-Tsai Chen,et al.  Study on the acoustic transmission loss of a rigid perforated screen , 1996 .

[10]  D. Takahashi,et al.  A new method for predicting the sound absorption of perforated absorber systems , 1997 .

[11]  W.-H. Chen,et al.  Acoustic transmission analysis of multi-layer absorbers , 2001 .

[12]  Ahmad Rasdan Ismail,et al.  Acoustic properties of multi-layer coir fibres sound absorption panel , 2008 .

[13]  Istvn L. Vr,et al.  Noise and Vibration Control Engineering , 2005 .

[14]  Masahiro Toyoda,et al.  Reduction of acoustic radiation by impedance control with a perforated absorber system , 2005 .

[15]  Masayuki Morimoto,et al.  A note on the relationship between the sound absorption by microperforated panels and panel/membrane-type absorbers , 2009 .

[16]  Pedro Cobo,et al.  Microperforated insertion units: An alternative strategy to design microperforated panels , 2006 .

[17]  Franck Sgard,et al.  Acoustic absorption of macro-perforated porous materials , 2001 .

[18]  Huang Qibai,et al.  A method for calculating the absorption coefficient of a multi-layer absorbent using the electro-acoustic analogy , 2005 .

[19]  Francesco Genna,et al.  Analysis of a perforated panel for the correction of low frequency resonances in medium size rooms , 2007 .

[21]  Franck Sgard,et al.  On the use of perforations to improve the sound absorption of porous materials , 2005 .

[22]  L. Rayleigh,et al.  The theory of sound , 1894 .

[23]  K. Uno Ingard,et al.  Notes on Sound Absorption Technology , 1994 .

[24]  W. Chen,et al.  ON THE ACOUSTIC ABSORPTION OF POROUS MATERIALS WITH DIFFERENT SURFACE SHAPES AND PERFORATED PLATES , 2000 .

[25]  Franck Sgard,et al.  Modeling of perforated plates and screens using rigid frame porous models , 2007 .

[26]  W. A. Davern,et al.  Calculation of acoustic impedance of multi-layer absorbers , 1986 .

[27]  U. Ingard.  On the Theory and Design of Acoustic Resonators , 1953 .

[28]  Masahiro Toyoda,et al.  Reduction of acoustic radiation by perforated board and honeycomb layer systems , 2007 .

[29]  Eric Wai Ming Lee,et al.  Sound absorption of a finite flexible micro-perforated panel backed by an air cavity , 2005 .

[30]  Jian Kang,et al.  Feasibility of applying micro-perforated absorbers in acoustic window systems , 2005 .