Hybrid converter with ac side cascaded H-bridge cells against H-bridge alternative arm modular multilevel converter: steady-state and dynamic performance

This study explorers the operating principles of the hybrid converter with ac side cascaded H-bridge cells and the H-bridge alternative arm modular multilevel converter, where the main objective is to compare their steady-state and transient performance. This comparison focuses on steady-state aspects such as active and reactive power control and semi-conductor losses and the transient performance of these converters during ac and dc network faults. To facilitate this comparison, detailed switch models of both high-voltage direct current (HVDC) converters are developed and simulated in Matlab-Simulink. The major outcomes are discussed and strengths and weakness associated with each converter are highlighted.

[1]  O. Anaya-Lara,et al.  HVDC network: Wind power integration and creation of super grid , 2011, 2011 10th International Conference on Environment and Electrical Engineering.

[2]  G. B. Gharehpetian,et al.  A New Topology of Cascaded Multilevel Converters With Reduced Number of Components for High-Voltage Applications , 2011, IEEE Transactions on Power Electronics.

[3]  H. Akagi,et al.  PWM control and experiment of modular multilevel converters , 2008, 2008 IEEE Power Electronics Specialists Conference.

[4]  Guangfu Tang,et al.  New technologies of voltage source converter (VSC) for HVDC transmission system based on VSC , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[5]  Olimpo Anaya-Lara,et al.  HVDC Network : DC fault ride-through improvement , 2011 .

[6]  U N Gnanarathna,et al.  Efficient Modeling of Modular Multilevel HVDC Converters (MMC) on Electromagnetic Transient Simulation Programs , 2011, IEEE Transactions on Power Delivery.

[7]  B. W. Williams,et al.  Modular multilevel converter for medium-voltage applications , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[8]  Barry W. Williams,et al.  Network fault tolerant voltage-source-converters for high-voltage applications , 2010 .

[9]  D. R. Critchley,et al.  A ew Hybrid Multi-Level Voltage-Source Converter with DC Fault Blocking Capability , 2010 .

[10]  Stephen J. Finney,et al.  Voltage source converter in high voltage applications: Multilevel versus two-level converters , 2010 .