论文信息 - Metrology for MEMS; MEMS for Metrology

Metrology for MEMS; MEMS for Metrology

• A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers.

[1] Phj Piet Schellekens,et al. Accuracy Limitations of Fast Mechanical Probing , 1996 .

[2] Phj Piet Schellekens,et al. Development of a 2D probing system with nanometer resolution , 1997 .

[3] Phj Piet Schellekens,et al. Development of a Traceable Laser-Based Displacement Calibration System with Nanometer Accuracy , 1997 .

[4] H Han Haitjema,et al. Design and calibration of a parallel-moving displacement generator for nano-metrology , 1998 .

[5] Phj Piet Schellekens,et al. Design of a High-Precision 3D-Coordinate Measuring Machine , 1998 .

[6] Andrew Lewis,et al. Design for a compact high-accuracy CMM , 1999 .

[7] H Han Haitjema,et al. Calibration of displacement sensors up to 300 µm with nanometre accuracy and direct traceability to a primary standard of length , 2000 .

[8] Phj Piet Schellekens,et al. Design of a 3D CMM with elastically guided z-axis and x,y axis with less than 2 mm ABBE offset , 2002 .

[9] WO Wouter Pril,et al. Development of high precision mechanical probes for coordinate measuring machines , 2002 .