Elastic melt-blown nonwoven fabrication of styrene‐ethylene/butylene‐styrene copolymer and polypropylene blends: a study of morphology and properties

Fabrics produced by the melt-blown nonwoven process have the advantage over competing materials of possessing an ultrafine fibrous and porous structure. However, their brittleness and poor toughness restrict their wider application. There is increasing demand for nonwovens that have high stretchability and elasticity while maintaining a melt-blown structure. In this study, polypropylene (PP) and styrene‐ethylene/butylene‐styrene copolymer (SEBS) were blended at different ratios and subsequently used in the melt-blowing process. The morphology of the blends displayed a co-continuous structure when the ratio of SEBS to PP in blends was similar. Furthermore, it was found that all the blends had good spinnability from the melt-blowing process during rheological and thermal properties tests. All the elastic melt-blown nonwovens fabricated in this research had elongations higher than 400% and elastic recoveries higher than 50%, which was indicative of good elasticity. Meanwhile, the nonwovens maintained fine fiber diameters and good filtration properties, in keeping with traditional melt-blown nonwovens.

[1]  F. Zhou,et al.  Fabrication of ultra-high working range strain sensor using carboxyl CNTs coated electrospun TPU assisted with dopamine , 2021 .

[2]  F. Zhou,et al.  A Highly Stretchable and Sensitive Strain Sensor Based on Dopamine Modified Electrospun SEBS Fibers and MWCNTs with Carboxylation , 2021, Advanced Electronic Materials.

[3]  Alper Kasgoz.  Mechanical, Tensile Creep and Viscoelastic Properties of Thermoplastic Polyurethane/Polycarbonate Blends , 2021, Fibers and Polymers.

[4]  E. Shim,et al.  Process‐structure‐property relationship of meltblown poly ( styrene–ethylene / butylene–styrene ) nonwovens , 2020 .

[5]  R. Milašius,et al.  Development and characterization of eco-sustainable banana fiber nonwoven material: surface treatment, water absorbency and mechanical properties , 2020, Cellulose.

[6]  Guodong Jiang,et al.  Co-continuous phase structure formed in melt processing inducing shear bands to prevent crack propagation: Significant improvement in impact toughness of PMMA , 2020 .

[7]  A. Bhowmick,et al.  Unique compatibilized thermoplastic elastomer from polypropylene and epichlorohydrin rubber , 2019, Polymer.

[8]  Joaquim Teixeira de Assis,et al.  Morphological, mechanical, and thermal properties of PP/SEBS/talc composites , 2019, Journal of Thermoplastic Composite Materials.

[9]  Jianxun Wu,et al.  Influence of extender oil composition on flowing property, thermal stability, and morphology of styrene‐b‐ethylene‐co‐butylene‐b‐styrene copolymer/polypropylene/oil blends , 2019, Polymers for Advanced Technologies.

[10]  Liang Jiang,et al.  Study on Spinnability of PP/PU Blends and Preparation of PP/PU Bi-component Melt Blown Nonwovens , 2019, Fibers and Polymers.

[11]  Yongming Song,et al.  Role of Wood Fibers in Tuning Dynamic Rheology, Non-Isothermal Crystallization, and Microcellular Structure of Polypropylene Foams , 2018, Materials.

[12]  V. Valcárcel,et al.  Influence of phase morphology on the rheology and thermal conductivity of HDPE/PA6 immiscible blends with alumina whiskers , 2018, Polymer Testing.

[13]  Yongchun Zeng,et al.  Fabrication of helical microfibers from melt blown polymer blends , 2018 .

[14]  Liang Jiang,et al.  Study on structure and property of PP/TPU melt-blown nonwovens , 2018, The Journal of The Textile Institute.

[15]  C. Macosko,et al.  Influence of rheology and surface properties on morphology of nanofibers derived from islands-in-the-sea meltblown nonwovens , 2018, Polymer.

[16]  US 2005O196612A.  ELASTOMERIC BICOMPONENT FIBERS COMPRISING BLOCK COPOLYMERS HAVING HIGH FLOW , 2017 .

[17]  M. Atmaca,et al.  Investigation of the effects of fabric parameters on air permeability of woolen fabrics , 2015 .

[18]  B. Pourdeyhimi,et al.  Meltblown fiber mats and their tensile strength , 2014 .

[19]  M. A. Hassan,et al.  Fabrication of nanofiber meltblown membranes and their filtration properties , 2013 .

[20]  Seetha S Manickam,et al.  Characterization of polymeric nonwovens using porosimetry, porometry and X-ray computed tomography , 2012 .

[21]  X. Qin,et al.  Electrospun Nanofibers from Crosslinked Poly(vinyl alcohol) and Its Filtration Efficiency , 2008 .

[22]  M. A. Gómez,et al.  Optimizing the balance between impact strength and stiffness in polypropylene/elastomer blends by incorporation of a nucleating agent , 2008 .

[23]  Hongxia Wang,et al.  Self‐Crimping Bicomponent Nanofibers Electrospun from Polyacrylonitrile and Elastomeric Polyurethane , 2005 .

[24]  M. Eroglu,et al.  Effect of the elastomer type on the microstructure and mechanical properties of polypropylene , 2005 .

[25]  I. Šmit,et al.  Polypropylene/talc/SEBS (SEBS-g-MA) composites. Part 2. Mechanical properties , 2005 .

[26]  M. M. C. Forte,et al.  SBS and SEBS block copolymers as impact modifiers for polypropylene compounds , 2005 .

[27]  R. R. Bresee,et al.  Influence of Processing Conditions on Melt Blown Web Structure: Part 1 – DCD , 2004 .

[28]  이윤응.  Process Property Studies of Melt Blown Thermoplastic Polyurethane Polymers , 2004 .

[29]  L. Wadsworth,et al.  Study of polypropylene/poly(ethylene terephthalate) bicomponent melt‐blowing process: The fiber temperature and elongational viscosity profiles of the spinline , 2003 .

[30]  L. Pessan,et al.  Toughening of polypropylene with styrene/ethylene‐butylene/styrene triblock copolymer: Effects of reactive and nonreactive compatibilization , 2002 .

[31]  B. Ohlsson,et al.  Melt miscibility in blends of polypropylene, polystyrene‐block‐poly(ethylene‐stat‐butylene)‐block‐polystyrene, and processing oil from melting point depression , 1996 .

[32]  Jong-Seon Yu,et al.  Thermoplastic Elastomer의 응용 , 1992 .

[33]  토드 모르만 마이클.  Multi-direction stretch composite elastic material , 1990 .

[34]  A. Gupta,et al.  Crystallization of PP in PP/SEBS blends and its correlation with tensile properties , 1984 .