Densification behaviour of nanocrystalline hydroxyapatite bioceramics

Abstract The sinterability of nanocrystalline hydroxyapatite (HA) particles by microwave sintering was compared with conventional pressureless sintering. The results revealed that microwave heating was effective in producing a useful HA body in a very short sintering cycle without disrupting the HA phase stability. The maximum hardness of 7.21 GPa and 6.38 GPa was obtained for HA sintered at 1050 °C by the conventional method and 1150 °C by microwave sintering, respectively. The maximum fracture toughness measured for the microwave-sintered and conventional-sintered HA was 1.45 MPam1/2 at 1050 °C and 1.22 MPam1/2 at 1000 °C, respectively. Although the relative density of microwave-sintered HA was slightly lower than the conventional-sintered HA throughout the sintering regime employed, taking into account of the heating and soaking periods, the time taken by microwave sintering to achieve a relative density of 96.5% was about 3% of the time consumed for samples sintered by the conventional heating. Microwave heating was found to be an effective technique to produce a useful HA body for clinical applications without causing grain coarsening.

[1]  H. Aoki,et al.  Mechanical properties of sintered hydroxyapatite for prosthetic applications , 1981 .

[2]  Dean‐Mo Liu.  Fabrication of hydroxyapatite ceramic with controlled porosity , 1997, Journal of materials science. Materials in medicine.

[3]  J. Ong,et al.  Rapid sintering of hydroxyapatite by microwave processing , 2002 .

[4]  P. Hardouin,et al.  Porous HA ceramic for bone replacement: Role of the pores and interconnections – experimental study in the rabbit , 2001, Journal of materials science. Materials in medicine.

[5]  A. Ruys,et al.  Sintering effects on the strength of hydroxyapatite. , 1995, Biomaterials.

[6]  T. Kijima,et al.  Preparation and Thermal Properties of Dense Polycrystalline Oxyhydroxyapatite , 1979 .

[7]  Z. Xingdong,et al.  Bone-like apatite formation in intramuscularly implanted calcium phosphate ceramics in different kinds of animals , 2002 .

[8]  L L Hench,et al.  Biomaterials: a forecast for the future. , 1998, Biomaterials.

[9]  Mel I. Mendelson,et al.  Average Grain Size in Polycrystalline Ceramics , 1969 .

[10]  S. Ramesh,et al.  Effects of Sintering Temperature on the Properties of Hydroxyapatite , 2000 .

[11]  R. Smoluchowski,et al.  Elements of X‐Ray Diffraction , 1957 .

[12]  R. Roy,et al.  Fabrication of Hydroxyapatite Ceramics by Microwave Processing , 1992 .

[13]  W. Bonfield,et al.  Biomechanical assessment of bone ingrowth in porous hydroxyapatite , 1997, Journal of materials science. Materials in medicine.

[14]  F. Delannay,et al.  The influence of high sintering temperatures on the mechanical properties of hydroxylapatite , 1995 .

[15]  F. Monteiro,et al.  The Production and Characterisation of a Hydroxyapatite Ceramic Material , 1991 .

[16]  M. Rahaman.  Ceramic Processing and Sintering , 1995 .

[17]  John Wang,et al.  Mechanochemical synthesis of nanocrystalline hydroxyapatite from CaO and CaHPO4. , 2001, Biomaterials.

[18]  W. Brostow,et al.  Hydroxyapatite spheres with controlled porosity for eye ball prosthesis: processing and characterization , 2001, Journal of materials science. Materials in medicine.

[19]  J. Lu,et al.  Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo , 1999, Journal of materials science. Materials in medicine.

[20]  M. Almeida,et al.  Porosity control of hydroxyapatite implants , 1999, Journal of materials science. Materials in medicine.

[21]  Yanchun Zhou,et al.  Preparation and mechanical properties of dense polycrystalline hydroxyapatite through freeze-drying , 1998, Journal of materials science. Materials in medicine.

[22]  Larry L. Hench,et al.  Bioceramics: From Concept to Clinic , 1991 .

[23]  S. Tor,et al.  Spark plasma sintering of hydroxyapatite powders. , 2002, Biomaterials.

[24]  T. Chaki,et al.  Sintering behaviour and mechanical properties of hydroxyapatite and dicalcium phosphate , 1993 .

[25]  Xing‐dong Zhang,et al.  Osteoinduction by calcium phosphate biomaterials , 1998, Journal of materials science. Materials in medicine.

[26]  D. S. Metsger,et al.  Tricalcium phosphate ceramic--a resorbable bone implant: review and current status. , 1982, Journal of the American Dental Association.

[27]  Rustum Roy,et al.  Microwave sintering of hydroxyapatite ceramics , 1994 .

[28]  M. Ghorbani,et al.  Some important factors in the wet precipitation process of hydroxyapatite , 2003 .

[29]  Masahiro Yoshimura,et al.  Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants , 1998 .

[30]  J. Planell,et al.  Hydroxyapatite ceramic bodies with tailored mechanical properties for different applications. , 2002, Journal of biomedical materials research.

[31]  Scott J Hollister,et al.  Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. , 2002, Biomaterials.

[32]  H. Aoki,et al.  Sintered hydroxyapatite for a percutaneous device and its clinical application. , 1987, Medical progress through technology.

[33]  W. Bonfield,et al.  Effect of powder characteristics on the sinterability of hydroxyapatite powders , 2001, Journal of materials science. Materials in medicine.

[34]  Xing‐dong Zhang,et al.  High temperature characteristics of synthetic hydroxyapatite , 1993 .

[35]  W. Sutton,et al.  Microwave processing of ceramic materials , 1989 .

[36]  W. D. Kingery,et al.  Introduction to Ceramics , 1976 .

[37]  Masakazu Kawashita,et al.  Novel bioactive materials with different mechanical properties. , 2003, Biomaterials.

[38]  G. With,et al.  Preparation, microstructure and mechanical properties of dense polycrystalline hydroxy apatite , 1981 .

[39]  H. Varma,et al.  Microwave sintering of nanosized hydroxyapatite powder compacts , 2002 .

[40]  C. Ju,et al.  Effect of doped bioactive glass on structure and properties of sintered hydroxyapatite , 1998 .