Carbon value engineering: A framework for integrating embodied carbon and cost reduction strategies in building design

Abstract Value Engineering (VE) is a process where building materials, systems or design strategies are substituted to reduce capital costs without negatively impacting functionality. This research examines how Value Engineering can be adapted to also integrate the reduction of embodied carbon. A Carbon Value Engineering (CO2VE) framework is proposed to determine both capital cost and embodied carbon. The framework uses Pareto Principles to identify the primary contributors to these metrics, proposes alternative design strategies and uses Marginal Abatement Cost Curves (MACC) to visualise direct and indirect impacts of the changes. The framework is tested on an 18-storey building in Sydney. Results show that embodied carbon makes up 27–58% of the building's total lifecycle carbon emissions, depending on the future energy mix. The most significant contributor to embodied carbon and capital cost is the structural system. Alternative structural systems are evaluated with a post-tensioned concrete structure demonstrating an 8% reduction in embodied carbon and a 10% capital cost saving. A whole timber structure reduces embodied carbon by 13%–26% and cost by 5%. Embodied carbon savings are found to be comparable to conventional strategies to reduce operating carbon emissions such as the use of a high-performance building facade over the building's life.

[1]  Barbara X. Rodriguez,et al.  Benchmarking the Embodied Carbon of Buildings , 2017 .

[2]  Margaret Jollands,et al.  Life cycle assessment and life cycle cost implication of residential buildings - A review , 2015 .

[3]  Adolf Acquaye,et al.  Integrating economic considerations with operational and embodied emissions into a decision support system for the optimal ranking of building retrofit options , 2014 .

[4]  Hamid Valipour,et al.  Energy implications of using steel-timber composite (STC) elements in buildings , 2018, Energy and Buildings.

[5]  Ali Akbarnezhad,et al.  Effects of structural system on the life cycle carbon footprint of buildings , 2015 .

[6]  Li Yu,et al.  The wood from the trees: The use of timber in construction , 2017 .

[7]  Georgia Warren-Myers,et al.  Integrating life-cycle GHG emissions into a building’s economic evaluation , 2020, Buildings and Cities.

[8]  N. Abas,et al.  Review of energy storage and transportation of energy , 2019, Energy Storage.

[9]  G. Habert,et al.  Biogenic carbon in buildings: a critical overview of LCA methods , 2020 .

[10]  H. Brattebø,et al.  An analytical method for evaluating and visualizing embodied carbon emissions of buildings , 2020 .

[11]  Georgia Warren-Myers,et al.  Quantifying Australia’s life cycle greenhouse gas emissions for new homes , 2020 .

[12]  Soo Huey Teh,et al.  Integrated Carbon Metrics and Assessment for the Built Environment , 2015 .

[13]  Guillaume Habert,et al.  Fast-growing bio-based materials as an opportunity for storing carbon in exterior walls , 2018 .

[14]  D. Carmichael.  Adjustments within discount rates to cater for uncertainty—Guidelines , 2017 .

[15]  Francesco Pomponi,et al.  Buildings as a Global Carbon Sink? A Reality Check on Feasibility Limits , 2020 .

[16]  S. Finnegan.  New Financial Strategies for Sustainable Buildings: Practical Guidance for Built Environment Professionals , 2017 .

[17]  Alexander Passer,et al.  Implementing Life Cycle Sustainability Assessment during design stages in Building Information Modelling: From systematic literature review to a methodological approach , 2020, Building and Environment.

[18]  Ayodeji Emmanuel Oke,et al.  Sustainable Value Management for Construction Projects , 2017 .

[19]  Jiaping Liu,et al.  Embodied carbon emissions of office building: A case study of China's 78 office buildings , 2016 .

[20]  Robert H. Crawford,et al.  International High-Performance Built Environment Conference – A Sustainable Built Environment Conference 2016 Series ( SBE 16 ) , iHBE 2016 The Carbon Footprint of Australia ’ s Construction Sector , 2016 .

[21]  Weisheng Lu,et al.  Optimising choices of ‘building services’ for green building: Interdependence and life cycle costing , 2019, Building and Environment.

[22]  T. Ngo,et al.  Feasibility study to estimate the environmental benefits of utilising timber to construct high-rise buildings in Australia , 2019, Building and Environment.

[23]  Patxi Hernandez,et al.  Analysis of life-cycle boundaries for environmental and economic assessment of building energy refurbishment projects , 2017 .

[24]  Theodoros Theodosiou,et al.  Embodied energy in residential buildings-towards the nearly zero energy building: A literature review , 2016 .

[25]  Min-Ho Jang,et al.  Assessment Model for Energy Consumption and Greenhouse Gas Emissions during Building Construction , 2014 .

[26]  Amin Hammad,et al.  Simulation-Based Multi-Objective Optimization of institutional building renovation considering energy consumption, Life-Cycle Cost and Life-Cycle Assessment , 2019, Journal of Building Engineering.

[27]  Chimay Anumba,et al.  A review of life cycle assessment of buildings using a systematic approach , 2019, Building and Environment.

[28]  Benedict D. Ilozor,et al.  Design Economics for the Built Environment Impact of Sustainability on Project Evaluation , 2015 .

[29]  G. Kokogiannakis,et al.  Incorporating environmental evaluation and thermal properties of concrete mix designs , 2016 .

[30]  H. M. Lee,et al.  Evaluation of the influence of design factors on the CO2 emissions and costs of reinforced concrete columns , 2014 .

[31]  Albert P.C. Chan,et al.  Barriers Affecting the Adoption of Green Building Technologies , 2017 .

[32]  L. Johnson,et al.  Quantifying Environmental Impacts of Structural Material Choices Using Life Cycle Assessment: A Case Study , 2018 .

[33]  Arnaud Castel,et al.  Hybrid life cycle assessment of greenhouse gas emissions from cement, concrete and geopolymer concrete in Australia , 2017 .

[34]  Craig Langston,et al.  Reliability of building embodied energy modelling: an analysis of 30 Melbourne case studies , 2008 .

[35]  Mark Hughes,et al.  A multidisciplinary approach to sustainable building material selection: A case study in a Finnish context , 2014 .

[36]  T. Graedel,et al.  Buildings as a global carbon sink , 2020, Nature Sustainability.

[37]  Barbara X. Rodriguez,et al.  Mechanical, electrical, plumbing and tenant improvements over the building lifetime: Estimating material quantities and embodied carbon for climate change mitigation , 2020 .

[38]  Georgios Kokogiannakis,et al.  A method of uncertainty analysis for whole-life embodied carbon emissions (CO2-e) of building materials of a net-zero energy building in Australia , 2019, Journal of Cleaner Production.

[40]  Ali Akbarnezhad,et al.  Optimising embodied carbon and U-value in load bearing walls: A mathematical bi-objective mixed integer programming approach , 2018 .

[41]  Robert Crawford,et al.  The impact of value engineering on embodied greenhouse gas emissions in the built environment: A hybrid life cycle assessment , 2020 .

[42]  Francesco Pomponi,et al.  Measuring embodied carbon dioxide equivalent of buildings: A review and critique of current industry practice , 2017 .

[43]  Jack Chin Pang Cheng,et al.  Developing a CO 2 -e Accounting Method for Quantification and Analysis of Embodied Carbon in High-Rise Buildings , 2017 .

[44]  Ali Akbarnezhad,et al.  Estimation and Minimization of Embodied Carbon of Buildings: A Review , 2017 .

[45]  T. Theodosiou,et al.  Normalising and assessing carbon emissions in the building sector: A review on the embodied CO 2 emissions of residential buildings , 2018 .

[46]  Lucélia Taranto Rodrigues,et al.  The impact of the building envelope on the energy efficiency of residential tall buildings in Saudi Arabia , 2017 .

[47]  Timothy J McCarthy,et al.  Integrated life cycle cost method for sustainable structural design by focusing on a benchmark office building in Australia , 2018 .

[48]  English Version,et al.  Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method , 2010 .

[49]  Enrico Fabrizio,et al.  Cost-Optimal Analysis for Nearly Zero Energy Buildings Design and Optimization: A Critical Review , 2018, Energies.

[50]  Jardar Lohne,et al.  High-rise Timber Buildings as a Climate Change Mitigation Measure – A Comparative LCA of Structural System Alternatives , 2016 .