Bilayer CrN/Cr coating-modified 316L stainless steel bipolar plates for high temperature polymer electrolyte fuel cells

Abstract In this work, a bilayer CrN/Cr coating was deposited on the surface of a 0.1 mm-thick SS316L specimen with a size of 60 × 60 mm2 by means of a reactive magnetron sputtering method. Using a specially-designed electrochemical cell for simulating the HT-PEFC environment, various electrochemical tests, including potentiodynamic polarization, potentiostatic polarization and EIS, were performed in order to evaluate the anti-corrosion properties and stability of the bilayer CrN/Cr coating in simulated HT-PEFC environments. Additionally, ex-situ characterizations using XRD, SEM + EDX and ICR were carried out to investigate the crystal structure and composition of CrN/Cr coating, surface morphologies and the interfacial contact resistance of samples before and after corrosion tests. The results show that the bilayer CrN/Cr coating could provide a more than 99.9% protective effect on the substrate (SS316L) in the simulated HT-PEFC environment at RT and 130 °C, and reduce the corrosion rates of BPPs more than 600 times in both the simulated cathodic and anodic environments of a HT-PEFC. Furthermore, an ICR value of CrN/Cr SS316L (5.5 mΩ cm2) is around one order of magnitude lower than that of the bare SS316L substrate (47 mΩ cm2) in a typical pressing force for assembling fuel cells (140 N cm−2).

[1]  D. Teer,et al.  A study of the tribological behaviour of CrN, Graphit-iC and Dymon-iC coatings under oil lubrication , 2004 .

[2]  G. Frankel,et al.  Fundamentals of Corrosion Kinetics , 2016 .

[3]  P. Chu,et al.  C/CrN multilayer coating for polymer electrolyte membrane fuel cell metallic bipolar plates , 2013 .

[4]  Young Soo Yoon,et al.  Corrosion and electrical properties of CrN- and TiN-coated 316L stainless steel used as bipolar plates for polymer electrolyte membrane fuel cells , 2013 .

[5]  Jung-Gu Kim,et al.  Electrochemical Behavior of CrN Coated on 316L Stainless Steel in Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell , 2008 .

[6]  K. Wippermann,et al.  Electrochemical Corrosion Study of Metallic Materials in Phosphoric Acid as Bipolar Plates for HT-PEFCs , 2014 .

[7]  K. Wippermann,et al.  Corrosion and Electrical Properties of SS316L Materials in the Simulated HT-PEFC Environment , 2018 .

[8]  Christoph Hartnig,et al.  On a new degradation mode for high-temperature polymer electrolyte fuel cells: How bipolar plate degradation affects cell performance , 2011 .

[9]  M. Kouřil,et al.  Corrosion rate of construction materials in hot phosphoric acid with the contribution of anodic polarization , 2012 .

[10]  Min Zhang,et al.  Composition optimization of arc ion plated CrNx films on 316L stainless steel as bipolar plates for polymer electrolyte membrane fuel cells , 2012 .

[11]  B. Yi,et al.  CrN/Cr multilayer coating on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells , 2012 .

[12]  Heli Wang,et al.  Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells , 2003 .

[13]  R. A. Antunes,et al.  Corrosion of metal bipolar plates for PEM fuel cells: A review , 2010 .

[14]  Lixia Wang,et al.  Polylaminate TaN/Ta coating modified ferritic stainless steel bipolar plate for high temperature proton exchange membrane fuel cell , 2018, Journal of Power Sources.

[15]  Waldemar Bujalski,et al.  High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review , 2013 .

[16]  W. Meng,et al.  Inductively coupled plasma assisted physical vapor deposition of titanium nitride coatings , 1997 .

[17]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[18]  C. Roth,et al.  Design of a reference electrode for high-temperature PEM fuel cells , 2013, Journal of Applied Electrochemistry.

[19]  G. Göransson,et al.  Metallic Bipolar Plates for High Temperature Polymer Electrolyte Membrane Fuel Cells , 2016 .

[20]  Peter Bøggild,et al.  Multilayer graphene for long-term corrosion protection of stainless steel bipolar plates for polymer electrolyte membrane fuel cell , 2015 .

[21]  A. Matthews,et al.  An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II.: EIS interpretation of corrosion behaviour , 2003 .

[22]  N. Hara,et al.  Self-healing Corrosion Protection Ability of Composition-Gradient Al2 O 3 ⋅ Nb Nanocomposite Thin Films , 2003 .

[23]  Changqing Liu,et al.  Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti–6Al–4V artificial hip joints , 2003 .

[24]  A. Srinivasan,et al.  Effect of nitrides on the corrosion behaviour of 316L SS bipolar plates for Proton Exchange Membrane Fuel Cell (PEMFC) , 2015 .

[25]  P. Chu,et al.  Carbon coated stainless steel bipolar plates in polymer electrolyte membrane fuel cells , 2010 .

[26]  K. Wippermann,et al.  A Comprehensive Corrosion Study on Metallic Materials for HT-PEFC Application , 2013 .

[27]  X. Sun,et al.  Graphene grown on stainless steel as a high-performance and ecofriendly anti-corrosion coating for polymer electrolyte membrane fuel cell bipolar plates , 2015 .

[28]  S. Tanase,et al.  Amorphous carbon coated stainless separator for PEFCs , 2008 .

[29]  David J. Hart,et al.  Environmental benefits of transport and stationary fuel cells , 1998 .