Investigation of the electrode effects in mixed potential type ammonia exhaust gas sensors

Abstract Mixed potential ammonia exhaust gas sensors provide a high capability for applications in harsh environments when appropriate means are conducted to stabilize the electrodes catalytic activity. The discussed sensor utilizes oxygen ion conducting yttria stabilized zirconia and gold electrodes, one of which is covered with an SCR active film to establish ammonia sensitivity and selectivity. The used SCR catalyst is well-known and developed especially for ammonia SCR exhaust gas aftertreatment systems. Electrochemical half-cell measurements vs. a Pt reference indicate that both electrode configurations are electro catalytically active for ammonia oxidation, but the activity is more pronounced at the additional SCR catalyst layer. The results of the half-cell tests including ammonia dependent voltage and oxygen interference agree very well with the performance of the ammonia sensor device. The behavior of the catalyst electrode cover is characterized separately by activity measurements of powders. The sensing mechanism combines electrochemical reactions at the three phase boundary and chemical reactions at the catalyst material.

[1]  Ralf Moos,et al.  Recent Developments in the Field of Automotive Exhaust Gas Ammonia Sensing , 2008 .

[2]  Guido Busca,et al.  Chemical and mechanistic aspects of the selective catalytic reduction of NOx by ammonia over oxide catalysts: A review , 1998 .

[3]  Jens Zosel,et al.  Au–oxide composites as HC-sensitive electrode material for mixed potential gas sensors , 2002 .

[4]  D. R. Brown,et al.  CERIA-ELECTROLYTE-BASED MIXED POTENTIAL SENSORS FOR THE DETECTION OF HYDROCARBONS AND CARBON MONOXIDE , 1999 .

[5]  Norio Miura,et al.  Highly selective CO sensor using stabilized zirconia and a couple of oxide electrodes , 1998 .

[6]  Maximilian Fleischer,et al.  Selective Mixed Potential Ammonia Exhaust Gas Sensor , 2009 .

[7]  Lothar Mussmann,et al.  Investigation of the selective catalytic reduction of NO by NH3 on Fe-ZSM5 monolith catalysts , 2006 .

[8]  F. A. Kröger,et al.  Relations between the Concentrations of Imperfections in Crystalline Solids , 1956 .

[9]  Norio Miura,et al.  HIGH-TEMPERATURE POTENTIOMETRIC/AMPEROMETRIC NOX SENSORS COMBINING STABILIZED ZIRCONIA WITH MIXED-METAL OXIDE ELECTRODE , 1998 .

[10]  Gunter Hagen,et al.  Zeolites — Versatile materials for gas sensors , 2008 .

[11]  Erik O. Ahlgren,et al.  Thermoelectric power of stabilized zirconia , 1995 .

[12]  Ralf Moos,et al.  Thick-film solid electrolyte oxygen sensors using the direct ionic thermoelectric effect , 2009 .

[13]  Takashi Kawano,et al.  A highly selective CO sensor using LaMnO3 electrode-attached zirconia galvanic cell , 1997 .

[14]  Jacobus H. Visser,et al.  Development of ceramic mixed potential sensors for automotive application , 2002 .

[15]  Norio Miura,et al.  High-temperature hydrogen sensor based on stabilized zirconia and a metal oxide electrode , 1996 .

[16]  Norio Miura,et al.  Stabilized Zirconia-Based Sensor Attached with NiO ∕ Au Sensing Electrode Aiming for Highly Selective Detection of Ammonia in Automobile Exhausts , 2008 .