Characterization and self-test of electrostatically tunable resonators for frequency selective vibration measurements

In this paper, we present a measurement technique for the characterization and the self-test of Single Crystal Reactive Etching and Metallization (SCREAM)-fabricated tunable resonators. Such kinds of structures can be used for frequency selective vibration detection. Spectral information is extracted directly by mechanical filtering at the resonance frequency of the sensor structures. Flexible adjustment of the measurement range is obtained by means of resonance frequency tuning. The structures described in this paper use electrostatic softening (negative springs) to vary the total spring constant of the system. Frequency selective measurements require the exact knowledge of resonance frequency and quality factor. Therefore, a measurement technique for the characterization of the resonance behavior based on electrostatic actuation and capacitive detection of the second harmonic was developed. Undesired coupling effects are eliminated by anti-phase drive signals. Using this method, sensor arrays of tunable resonators are efficiently characterized.

[1]  Helmut Seidel,et al.  Resonant accelerometer with self-test , 2001 .

[2]  Peter Hauptmann,et al.  Micromachined resonator for cavitation sensing , 1999 .

[3]  Liwei Lin,et al.  Active frequency tuning for micro resonators by localized thermal stressing effects , 2001 .

[4]  Neil M. White,et al.  Microprocessor implemented self-validation of thick-film PZT/silicon accelerometer , 2001 .

[5]  Fook Siong Chau,et al.  2f method for the measurement of resonant frequency and Q-factor of micromechanical transducers , 2002, Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS.

[6]  Richard R. A. Syms,et al.  Electrothermal frequency tuning of folded and coupled vibrating micromechanical resonators , 1998 .

[7]  Victor Wowk,et al.  Machinery Vibration: Measurement and Analysis , 1991 .

[8]  H. P. Bloch,et al.  Practical machinery management for process plants. Volume 2: Machinery failure analysis and troubleshooting , 1983 .

[9]  Robert Puers,et al.  RASTA—real-acceleration-for-self-test accelerometer: a new concept for self-testing accelerometers , 2002 .

[10]  Brian D. Jensen,et al.  Design and simulation of shaped comb fingers for compensation of mechanical restoring force in tunable resonators , 2001 .

[11]  Young-Ho Cho,et al.  Frequency tuning of a laterally driven microresonator using an electrostatic comb array of linearly varied length , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[12]  N. C. MacDonald,et al.  SCREAM I: A single mask, single-crystal silicon, reactive ion etching process for microelectromechanical structures , 1994 .

[13]  Wolfram Doetzel,et al.  Frequency-selective silicon vibration sensor with direct electrostatic stiffness modulation , 2002, Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS.