Experimental study of particle deposition characteristics in a gasifier: Effect of slag wall temperature

[1]  B. Dong,et al.  Enrichment and utilization of residual carbon from coal gasification slag：A review , 2023, Process Safety and Environmental Protection.

[2]  Yonghui Bai,et al.  Study of the Deposition Characteristics of Particles on the Slag Wall of a Gasifier , 2023, Industrial & Engineering Chemistry Research.

[3]  Binghui Chen,et al.  Mathematical modeling for molten ash slagging moving bed coal gasifier considering the impact of particle behavior characteristics , 2022, Chemical Engineering Science.

[4]  S. Iglauer,et al.  A progress insight of the formation of hydrogen rich syngas from coal gasification , 2022, Journal of the Energy Institute.

[5]  Bo Zhang,et al.  In-situ catalytic gasification of sodium-rich direct coal liquefaction residue under CO2 atmosphere and kinetic analysis of gasification reaction process , 2022, Journal of the Energy Institute.

[6]  A. Raheem,et al.  Evaluating performance of pyrolysis and gasification processes of agriculture residues-derived hydrochar: Effect of hydrothermal carbonization , 2022, Journal of Cleaner Production.

[7]  Yan Gong,et al.  Experimental study of particle evolution characteristics below the burner plane in an impinging entrained-flow gasifier , 2022, Chemical Engineering Science.

[8]  Tamer M. Ismail,et al.  Hydrothermal carbonization of rape straw: Effect of reaction parameters on hydrochar and migration of AAEMs. , 2021, Chemosphere.

[9]  D. Pashchenko.  Industrial furnaces with thermochemical waste-heat recuperation by coal gasification , 2021 .

[10]  Lei Liu,et al.  Effect of pre-treatment on catalytic coal gasification characteristics of sub-bituminous coal , 2021 .

[11]  Ji-zhen Liu,et al.  Transition temperature and thermal conduction behavior of slag in gasification process , 2021 .

[12]  S. Porada,et al.  Effect of K, Na and Ca-based catalysts on the steam gasification reactions of coal. Part I: Type and amount of one-component catalysts , 2021 .

[13]  Guangsuo Yu,et al.  Detailed deposition characteristics around burner plane in an impinging entrained-flow coal gasifier , 2019, Chemical Engineering Science.

[14]  B. Meyer,et al.  Numerical study on entrained-flow gasification performance using combined slag model and experimental characterization of slag properties , 2017 .

[15]  Kuangfei Lin,et al.  Relationship between chemical components and coal ash deposition through the DTF experiments using real-time weight measurement system , 2017 .

[16]  Hai‐feng Liu,et al.  Comprehensive model with time limited wall reaction for entrained flow gasifier , 2016 .

[17]  Guangsuo Yu,et al.  Experimental study of the particle deposition characteristics in an entrained flow gasifier , 2015 .

[18]  Changfu You,et al.  An experimental investigation into the characteristics and deposition mechanism of high-viscosity coal ash , 2014 .

[19]  Jianliang Xu,et al.  Particulate matter properties in a bench-scale entrained-flow coal water slurry gasifier , 2014 .

[20]  Hyung-Taek Kim,et al.  Study on deposition tendency of coal ash under various gasification environments through DTF , 2014 .

[21]  P. Salatino,et al.  A lab-scale cold flow model reactor to investigate near-wall particle segregation relevant to entrained-flow slagging coal gasifiers , 2014 .

[22]  Sarma V. Pisupati,et al.  Image analysis measurements of particle coefficient of restitution for coal gasification applications , 2013 .

[23]  W. Stronge,et al.  Viscoplastic analysis for direct impact of sports balls , 2012 .

[24]  A. Yigit,et al.  A nonlinear visco-elastoplastic impact model and the coefficient of restitution , 2011 .

[25]  Yuxin Wu,et al.  Ash Deposition Behavior during Char−Slag Transition under Simulated Gasification Conditions , 2010 .

[26]  Zhenghua Dai,et al.  Numerical and experimental investigations on gas–particle flow behaviors of the Opposed Multi-Burner Gasifier , 2009 .

[27]  R. Xiao,et al.  Simulation of coal gasification in a pressurized spout‐fluid bed gasifier , 2009 .

[28]  Colin Thornton,et al.  A semi-analytical model for oblique impacts of elastoplastic spheres , 2009, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[29]  D. French,et al.  Ash chemistry and mineralogy of an Indonesian coal during combustion: Part II — Pilot scale observations , 2008 .

[30]  D. French,et al.  Ash chemistry and mineralogy of an Indonesian coal during combustion , 2008 .

[31]  Sung-Mo Jung,et al.  Viscosity of Highly Basic Slags , 2007 .

[32]  C Tropea,et al.  Impact of droplets onto inclined surfaces. , 2005, Journal of colloid and interface science.

[33]  Terry Wall,et al.  A mathematical model of ash formation during pulverized coal combustion , 2002 .

[34]  Ahmad H. Kharaz,et al.  The measurement of particle rebound characteristics , 2000 .

[35]  C. Thornton,et al.  A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres , 1998 .

[36]  John N. Harb,et al.  Simulation of ash deposit growth in a pulverized coal-fired pilot scale reactor , 1993 .

[37]  S. G. Kimura,et al.  Ash Behavior During Combustion and Deposition in Coal-Fueled Gas Turbines , 1987 .

[38]  D. Ingham,et al.  Prediction of particle sticking efficiency for fly ash deposition at high temperatures , 2019, Proceedings of the Combustion Institute.

[39]  Colin Thornton,et al.  Coefficients of restitution for elastoplastic oblique impacts , 2003 .

[40]  John N. Harb,et al.  Modeling of ash deposition in large-scale combustion facilities burning pulverized coal , 1997 .