Spark plasma sintering of silver nanopowder

The spark plasma sintering behaviour of silver nanopowder prepared by the electro-explosion method was investigated. Consolidation was carried out from 50°C to 800°C for 5 mins at 34 MPa with differential scanning calorimetry indicating a sintering onset temperature as low as 160°C and an activation energy of 86±1 kJ/mol. Near full density resulted from treatment at 300°C, and at higher temperatures a normal Hall-Petch relation is obeyed. The enhancement of Vicker's hardness to 1000MPa for materials sintered at 300°C is three times greater than for silver annealed in a conventional way. While polysynthetic twinning contributes to superior hardness, the primary cause is the sub-micron grain size.

[1]  K. Konopka,et al.  The effect of the twin boundaries on the yield stress of a material , 1997 .

[2]  V. Piotter,et al.  Various replication techniques for manufacturing three-dimensional metal microstructures , 1997 .

[3]  Xu Chen,et al.  Low-temperature and Pressureless Sintering Technology for High-performance and High-temperature Interconnection of Semiconductor Devices , 2007, 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems. EuroSime 2007.

[4]  D. Beruto,et al.  Grain growth in sintering of clustered powder compacts , 2000 .

[5]  E. Olevsky,et al.  Strength predictions for bulk structures fabricated from nanoscale tungsten powders , 2005 .

[6]  Sophia V. Kyriacou,et al.  Using nanoparticle optics assay for direct observation of the function of antimicrobial agents in single live bacterial cells. , 2004, Biochemistry.

[7]  J. Rödel,et al.  Effect of initial grain size on sintering trajectories , 2000 .

[8]  B. Günther.  Metal nanopowders for electrically conductive polymers , 1999 .

[9]  A. Gupta,et al.  Molecular Genetics: Silver as a biocide: Will resistance become a problem? , 1998, Nature Biotechnology.

[10]  Eric A. Stach,et al.  TEM annealing study of normal grain growth in silver thin films , 2000 .

[11]  C. Shearwood,et al.  Characterization of nanocrystalline TiNi powder , 2004 .

[12]  Melissa Ai Ling Teo,et al.  In Vitro and In Vivo Characterization of MEMS Microneedles , 2005, Biomedical microdevices.

[13]  B. Günther,et al.  Thermal stability of ultrafine-grained metals and alloys , 1993 .

[14]  F. Cui,et al.  Ag-Substituted Hydroxyapatite Coatings with Both Antimicrobial Effects and Biocompatibility , 1999 .

[15]  M. Imam,et al.  NUCLEATION AND GROWTH OF TWIN INTERFACES IN FCC METALS AND ALLOYS , 2000 .

[16]  J M Wilkinson,et al.  Nanotechnology applications in medicine. , 2003, Medical device technology.

[17]  G. Zou,et al.  Thermal characteristic of ultrafine-grained aluminum produced by wire electrical explosion , 2001 .

[18]  Ryutaro Maeda,et al.  Si-based print circuit board fabricated by Si deep etching and metal powder injection molding , 2001, SPIE Micro + Nano Materials, Devices, and Applications.

[19]  Lide Zhang,et al.  The microhardness of nanocrystalline silver , 1995 .

[20]  Subra Suresh,et al.  Nano-sized twins induce high rate sensitivity of flow stress in pure copper , 2005 .

[21]  M. Turker.  Effect of Oxygen Content on the Sintering Behaviour of Silver Nanopowders Produced by Inert Gas Condensation , 2002 .

[22]  J. Groza,et al.  Nanoparticulate materials densification , 1996 .

[23]  F. Bodart,et al.  Nucleation and growth of carbon onions synthesized by ion implantation at high temperatures , 2003 .

[24]  E. Pippel,et al.  Dependence of lattice parameters of small particles on the size of the nuclei , 1981 .