Crack detection in pipelines using multiple electromechanical impedance sensors

An extensive network of pipeline systems is used to transport and distribute national energy resources that heavily influence a nation's economy. Therefore, the structural integrity of these pipeline systems must be monitored and maintained. However, structural damage detection remains a challenge in pipeline engineering. To this end, this study developed a modified electromechanical impedance (EMI) technique for crack detection that involves fusing information from multiple sensors. We derived a new damage-sensitive feature factor based on a pipeline EMI model that considers the influence of the bonding layer between the EMI sensors and pipeline. We experimentally validated the effectiveness of the proposed method. Finally, we used a damage index—root mean square deviation—to examine the degree and position of crack damage in a pipeline.

[1]  Werner Hufenbach,et al.  Damage monitoring in pressure vessels and pipelines based on wireless sensor networks , 2011 .

[2]  Wei Yan,et al.  Application of EMI Technique for Crack Detection in Continuous Beams Adhesively Bonded with Multiple Piezoelectric Patches , 2008 .

[3]  Hoon Sohn,et al.  Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward , 2003 .

[4]  James Llinas,et al.  An introduction to multisensor data fusion , 1997, Proc. IEEE.

[5]  K. Tseng,et al.  Non-parametric damage detection and characterization using smart piezoceramic material , 2002 .

[6]  Daniel J. Inman,et al.  Impedance-Based Structural Health Monitoring for Temperature Varying Applications , 1999 .

[7]  Craig A. Rogers,et al.  Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches , 1995, Smart Structures.

[8]  L. Yan,et al.  Sensitivity evaluation in double-wall or multi-layer radiographic inspection of welds in pressure vessels , 2003 .

[9]  Suresh Bhalla,et al.  Structural Health Monitoring by Piezo–Impedance Transducers. II: Applications , 2004 .

[10]  Wieslaw J. Staszewski,et al.  Leak detection in pipeline networks using low‐profile piezoceramic transducers , 2007 .

[11]  K. Newton,et al.  NDT research for the oil and gas industry , 1992 .

[12]  Gangbing Song,et al.  Concrete structural health monitoring using embedded piezoceramic transducers , 2007 .

[13]  Gui-Rong Liu,et al.  A Modified Electro-Mechanical Impedance Model of Piezoelectric Actuator-Sensors for Debonding Detection of Composite Patches , 2002 .

[14]  Hong Hao,et al.  Integrated ARMA model method for damage detection of subsea pipeline system , 2013 .

[15]  Daniel J. Inman,et al.  Feasibility of using impedance‐based damage assessment for pipeline structures , 2001 .

[16]  Chee Kiong Soh,et al.  Electro-Mechanical Impedance (EMI)-Based Incipient Crack Monitoring and Critical Crack Identification of Beam Structures , 2014 .

[17]  Hoon Sohn,et al.  Baseline-free pipeline monitoring using optical fiber–guided laser ultrasonics , 2012 .

[18]  C. Yun,et al.  Health monitoring of steel structures using impedance of thickness modes at PZT patches , 2005 .

[19]  Tadeusz Uhl,et al.  Application of electromechanical impedance-based SHM for damage detection in bolted pipeline connection , 2016 .

[20]  Gyuhae Park,et al.  The use of macro‐fibre composites for pipeline structural health assessment , 2008 .

[21]  G. A. Marshall,et al.  Eddy Current Testing in the Petrochemical Industry , 2003 .

[22]  Jeong-Tae Kim,et al.  Smart PZT-interface for SHM in tendon-anchorage of cable-stayed bridge , 2012, Smart Structures.

[23]  Suresh Bhalla,et al.  Structural Health Monitoring by Piezo-Impedance Transducers. I: Modeling , 2004 .

[24]  Chunyuan Zuo,et al.  A Three-Dimensional Model of the Effective Electromechanical Impedance for an Embedded PZT Transducer , 2013 .

[25]  J. R. Still,et al.  Development of corrosion monitoring in the offshore production industry , 1992 .

[26]  Daniel J. Inman,et al.  IMPEDANCE-BASED HEALTH MONITORING OF CIVIL STRUCTURAL COMPONENTS , 2000 .

[27]  B. R. Orton,et al.  The potential use of infrared thermography to detect aircraft pressurisation leaks , 1999 .