Lighter-Than-Air and Pressurized Structures Technology for Unmanned Aerial Vehicles (UAVs)

Abstract : Several areas of unmanned aerial vehicle (UAV) performance need to be improved for the next generation of UAVs to be used successfully in expanded future combat roles. This report describes the initial research to improve the performance of UAVs through lighter-than-air or pressurized structures-based (PSB) technologies. Basically, we examined how to construct the UAV in such a way that a considerable percentage of its weight will be supported by or composed of inflatable structures containing air or helium. In this way, PSB technology will reduce the amount of energy required to keep the UAV aloft, thus allowing the use of smaller, slower, and quieter motors. Using PSB technology in tandem with improving technologies in electronics, energy storage, and materials should provide a substantial increase over current UAV performance in areas of need to the military.

[1]  Mark Costello,et al.  Nonlinear Model Predictive Control Technique for Unmanned Air Vehicles , 2006 .

[2]  R. H. Hansen,et al.  Surface treatment of polymers for adhesive bonding , 1967 .

[3]  Pascal Tristant,et al.  Atmospheric pressure plasmas: A review , 2006 .

[4]  L. Girifalco,et al.  A THEORY FOR ESTIMATION OF SURFACE AND INTERFACIAL ENERGIES. III. ESTIMATION OF SURFACE ENERGIES OF SOLIDS FROM CONTACT ANGLE DATA , 1960 .

[5]  Tim Smith,et al.  Inflatable and Rigidizable Wings for Unmanned Aerial Vehicles , 2003 .

[6]  R. E. Jensen,et al.  Chemical and morphological modification of polymers under a helium–oxygen dielectric barrier discharge , 2008 .

[7]  P. Dubruel,et al.  Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review. , 2009, Biomacromolecules.

[8]  H Edge,et al.  Pressurized Structure Technology for UAVS , 2008 .

[9]  D. Black,et al.  Shrouded propellers - A comprehensive performance study , 1968 .

[10]  K. Fang,et al.  Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma , 2009 .

[11]  Tim Smith,et al.  Morphing Inflatable Wing Development for Compact Package Unmanned Aerial Vehicles , 2004 .

[12]  G. Popa,et al.  Surface cross linking and functionalization of poly(ethylene terephthalate) in a helium discharge , 1997 .

[13]  M. Okubo,et al.  Surface modification of fluorocarbon polymer films for improved adhesion using atmospheric-pressure nonthermal plasma graft-polymerization , 2008 .