A low-cost power transducer for transient currents

In this manuscript, a low-cost power transducer, suitable for the implementation of electrical power meter, is presented. The current sensing unit is based on a Rogowski coil, while the voltage transduction is performed with an active voltage divider. An analog multiplier is adopted to generate the instantaneous power waveform. Active power and apparent power are measured with a digital multimeter. Each element of the proposed transducer has been experimentally characterized by means of reference instrumentation, and the results reported and discussed.

[1]  Esmaeil Hemmati,et al.  Digital Compensation of Rogowski Coil's Output Voltage , 2013, IEEE Transactions on Instrumentation and Measurement.

[2]  Zhang Ming-ming,et al.  Design and characteristics of two Rogowski coils based on printed circuit board , 2006, IEEE Transactions on Instrumentation and Measurement.

[3]  Karel Draxler,et al.  Calibration of Rogowski Coils With an Integrator at High Currents , 2011, IEEE Transactions on Instrumentation and Measurement.

[4]  Carmine Landi,et al.  Power-Quality Monitoring Instrument With FPGA Transducer Compensation , 2009, IEEE Transactions on Instrumentation and Measurement.

[5]  Mirko Marracci,et al.  Critical Parameters for Mutual Inductance Between Rogowski Coil and Primary Conductor , 2009, IEEE Transactions on Instrumentation and Measurement.

[6]  Giovanni Bucci,et al.  Embedded Power and Energy Measurement System Based on an Analog Multiplier , 2013, IEEE Transactions on Instrumentation and Measurement.

[7]  Anthony Collins Solid state solutions for electricity metrology , 1999 .

[8]  R. Ottoboni,et al.  An Electronic Current Transformer Based on Rogowski Coil , 2008, 2008 IEEE Instrumentation and Measurement Technology Conference.

[9]  Salvatore Nuccio,et al.  Characterization and Error Compensation of a Rogowski Coil in the Presence of Harmonics , 2011, IEEE Transactions on Instrumentation and Measurement.

[10]  Carmine Landi,et al.  Advanced Instrument For Field Calibration of Electrical Energy Meters , 2009, IEEE Transactions on Instrumentation and Measurement.

[11]  Giovanni Bucci,et al.  Low cost smart power metering , 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

[12]  Carmine Landi,et al.  Large bandwidth compensation of current transformers , 2009, 2009 IEEE Instrumentation and Measurement Technology Conference.

[13]  Branislav Djokic,et al.  Calibration of Rogowski Coils at Power Frequencies Using Digital Sampling , 2008, IEEE Transactions on Instrumentation and Measurement.

[14]  B. Djokic Calibration of Rogowski coils at power frequencies using digital sampling , 2008, 2008 Conference on Precision Electromagnetic Measurements Digest.

[15]  Wolfgang Eichhammer,et al.  Industrial energy efficiency: Indicators for a European cross-country comparison of energy efficiency in the manufacturing industry , 1997 .

[16]  Hans Edin,et al.  High-Frequency Model of the Rogowski Coil With a Small Number of Turns , 2007, IEEE Transactions on Instrumentation and Measurement.