Design and microfabrication of a compliant microgripper using nonbrittle and biocompatible material

This article presents the design and fabrication of a monolithic compliant microgripper. This research has mostly focused on the process of design, the finite element analysis, the fabrication method and use of a genetic algorithm method to solve the nonlinear kinematic equations and estimate the proper dimensions of the design. This new architecture of the microgripper enables it to apply a variable force to a wide range of micro-objects handled in microassembly, micromanipulation and also in biomedical applications such as artificial fertilization. The microgripper was designed to be normally open. Two shape memory alloy actuators close the jaws. To achieve the tasks, the most proper size has been considered to be 8 × 8 mm, with thickness of 250 µm. Polyethylene terephthalate has been used as the structural material. It is not brittle and is less sensitive to shock compared with silicon-based grippers; furthermore, its fabrication cost is less and it does not lose precision.

[1]  B. Nelson,et al.  Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field , 2007, Journal of Microelectromechanical Systems.

[2]  Bijan Shirinzadeh,et al.  Development of a novel flexure-based microgripper for high precision micro-object manipulation , 2009 .

[3]  Mir-Bahador Aryanezhad,et al.  A new genetic algorithm for solving nonconvex nonlinear programming problems , 2008, Appl. Math. Comput..

[5]  Eniko T. Enikov,et al.  An optically transparent gripper for micro-assembly , 2002 .

[6]  R. Joseph,et al.  Phenotypic Modulation of Cell Types around Implanted Polyethylene Terephthalate Fabric in Rabbit Muscle , 2013, Toxicologic pathology.

[7]  A. Nechaev,et al.  Investigation of latent tracks in polyethyleneterephthalate and their etching , 2002 .

[8]  Y. Suzuki,et al.  Flexible microgripper and its application to micromeasurement of mechanical and thermal properties , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[9]  Bijan Shirinzadeh,et al.  A new design of piezoelectric driven compliant-based microgripper for micromanipulation , 2009 .

[10]  Yves Bellouard,et al.  Local annealing of complex mechanical devices: a new approach for developing monolithic micro-devices , 1999 .

[11]  Larry L. Howell,et al.  Dimensional Synthesis of Compliant Constant-Force Slider Mechanisms , 1994 .

[12]  K. Tsui,et al.  Micromachined end-effector and techniques for directed MEMS assembly , 2004 .

[13]  Zhaowei Zhong,et al.  A microgripper using piezoelectric actuation for micro-object manipulation , 2007 .

[14]  Eniko T. Enikov,et al.  Optically transparent gripper for microassembly , 2001, Optics East.

[16]  James F. Jones,et al.  Development of a spring loaded micro-pivot bearing , 2010 .

[17]  Paolo Dario,et al.  Polymer sensorised microgrippers using SMA actuation , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[18]  Etienne Burdet,et al.  Monolithic shape memory alloy microgripper for 3D assembly of tissue engineering scaffolds , 2001, Optics East.

[19]  W. Cleghorn,et al.  Microassembly of 3-D microstructures using a compliant, passive microgripper , 2004, Journal of Microelectromechanical Systems.

[20]  M. Zeman,et al.  Electro-thermo-dynamic performance of a microgripping system , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[21]  Charles L. Karr,et al.  Solutions to systems of nonlinear equations via a genetic algorithm , 1998 .

[22]  P. Dario,et al.  Design and fabrication of an electrostatically driven microgripper for blood vessel manipulation , 2006 .

[23]  F Barazandeh,et al.  Design and microfabrication of a constant-force microgripper , 2011 .

[24]  Huang Xinhan,et al.  Research on Vacuum Micro-Gripper of Intelligent Micromanipulation Robots , 2004 .