Non-destructive testing—current capabilities and future directions

Abstract The non-destructive testing (NDT) industry is reviewed, the major techniques being described and current development directions and challenges identified. Visual inspection is probably the most widely used NDT technique but it does not generally involve the purchase of dedicated NDT instrumentation so it does not appear in market estimates. The NDT market is dominated by the ‘big five’ techniques: radiography, ultrasonics, eddy current, magnetic particle and penetrant testing. There is considerable research and development effort in other areas, particularly for niche markets. Nondestructive testing is a mature industry, the global market size for equipment being around $1 billion. However, the cost to users greatly exceeds this since much inspection is highly labour intensive, and extensive preparation for inspection is often required, particularly in-service. There is therefore a continuing drive to increase the speed of inspection, to reduce the preparation required and, if possible, to inspect without the need to shut down operation. With some notable exceptions, it is possible to find most types of defect. However, it is frequently not cost effective to do the inspection, so driving down overall inspection costs is a major research and development aim. The other significant research and development areas are in improving inspection reliability and in finding solutions in cases where there is currently no available inspection technique.

[1]  R. Halmshaw,et al.  Industrial Radiology: Theory and Practice , 1982 .

[2]  G. Hayward,et al.  Real-time ultrasonic techniques suitable for implementing non-contact NDT systems employing piezoceramic composite transducers , 1994 .

[3]  W. D. Dover,et al.  Review of developments in ACPD and ACFM , 1991 .

[4]  R Halmshaw,et al.  Introduction to the Non-Destructive Testing of Welded Joints , 1997 .

[5]  A. Khalid.  REVIEW OF THE NDT MARKET AND PERFORMANCE OF NDT COMPANIES OPERATING IN THEUK , 1999 .

[6]  Mary Sansalone,et al.  Impact-echo : nondestructive evaluation of concrete and masonry , 1997 .

[7]  Jack Blitz,et al.  Electrical and Magnetic Methods of Nondestructive Testing , 2020 .

[8]  J. W. Newman.  Shearographic inspection of aircraft structure , 1991 .

[9]  Sandra I. Woolley,et al.  Detection and segmentation of pipeline inspection features for diagnostically lossless data compression , 2001, IS&T/SPIE Electronic Imaging.

[10]  J Bungey.  TESTING CONCRETE BY RADAR , 1995 .

[11]  Peter Cawley,et al.  Low frequency NDT techniques for the detection of disbonds and delaminations , 1990 .

[12]  J. Bungey.  Testing concrete by radar : Repair and maintenance of damaged and worn-out concrete , 1995 .

[13]  Jean F. Bussière,et al.  Laser-Ultrasonics: From the Laboratory to the Shop Floor , 1998 .

[14]  Christopher Edwards,et al.  A Non-Contact Laser-Emat System for Crack and Hole Detection in Metal Plates , 1998 .

[15]  Bosco Fernandes,et al.  A portable inductive scanning system for imaging steel-reinforcing bars embedded within concrete , 2000 .

[16]  Alistair McNab,et al.  Towards automated interpretation of ultrasonic NDT data , 1999 .

[17]  C. D. Wells.  The commercial role of NDT in the context of a changing world , 1994 .

[18]  L. Schmerr.  Fundamentals of Ultrasonic Nondestructive Evaluation , 1998 .

[19]  P. Cawley,et al.  Rapid, Long Range Inspection of Chemical Plant Pipework Using Guided Waves , 2001 .

[20]  M. G. Silk,et al.  The use of diffraction-based time-of-flight measurements to locate and size defects , 1984 .

[21]  Michael Forde,et al.  SONIC NDT AND RADAR TESTING OF MASONRY , 1993 .

[22]  Paul McIntire,et al.  Acoustic emission testing , 1987 .

[23]  A. Temple,et al.  The inspection of aerospace structures using transient thermography , 1993 .

[24]  David A. Hutchins,et al.  Ultrasonic Generation by Pulsed Lasers , 1988 .

[25]  Charles R. Farrar,et al.  Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review , 1996 .

[26]  O. J. Løkberg,et al.  Detection of defects in composite materials by TV holography , 1988 .

[27]  Peter Cawley,et al.  An Ultrasonic Wheel Probe Alternative to Liquid Coupling , 1995 .

[28]  P. Cawley.  The rapid non-destructive inspection of large composite structures , 1994 .

[29]  Robert A. Smith,et al.  Transient eddy-current NDE for ageing aircraft - Capabilities and limitations. , 2001 .

[30]  D. Schindel,et al.  The design and characterization of micromachined air-coupled capacitance transducers , 1995, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[31]  Paul McIntire,et al.  Radiography and radiation testing , 1985 .

[32]  D.J. Powell,et al.  Flexible ultrasonic transducer arrays for nondestructive evaluation applications. I. The theoretical modeling approach , 1996, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[33]  X. E. Gros,et al.  Theory and implementation of NDT data fusion , 1995 .

[34]  Claudio Bruschini.  Metal Detectors in Civil Engineering and Humanitarian Demining : Overview and Tests of a Commercial Visualizing System , 1999 .

[35]  R. C. Mcmaster.  Liquid penetrant tests , 1982 .

[36]  M. G. Silk,et al.  Review of market opportunities for advanced sensors in non-destructive testing. II: Future market opportunities and market size predictions , 1994 .

[37]  Peter Cawley.  Ultrasonic measurements for the quantitative NDE of adhesive joints-Potential and challenges , 1992, IEEE 1992 Ultrasonics Symposium Proceedings.

[38]  J. Ogilvy.  Ultrasonic beam profiles and beam propagation in an austenitic weld using a theoretical ray tracing model , 1986 .

[39]  Do Thompson,et al.  A non-contact laser-EMAT system for crack and hole detection in metal plates , 1998 .