Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling

Rapid granular flow from a moving container and angle of repose formation were investigated by numerical simulations using the discrete element method (DEM) and experiments. Grain models of various geometrical complexity were studied and their ability to reproduce the experiments in those regimes was explored. The predictive power of the most realistic model for gravity driven cavity filling was assessed. Good agreement between computed and measured density distributions within the filled cavities provides a basis for numerical process variations aiming at homogenized density distributions. The effect of numerical coarse graining was found to be negligible for all properties of interest provided that force laws are scaled properly and corrections for boundary effects are taken into account. The proposed scaling was tested for a certain set of force laws but could be applied to different DEM forces as well. An analytic mass flow law for powder discharge from a moving container was derived and verified by our DEM simulations.

[1]  R. German.  Sintering theory and practice , 1996 .

[2]  D. Maza,et al.  The flow rate of granular materials through an orifice , 2007, 0707.4550.

[3]  Chuan-Yu Wu,et al.  Flow behaviour of powders during die filling , 2004 .

[4]  O. Coube,et al.  Numerical simulation of metal powder die compaction with special consideration of cracking , 2000 .

[5]  Angel Garcimartín,et al.  A non-standard statistical approach to the silo discharge , 2007 .

[6]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[7]  X. Olivella,et al.  Experimental and numerical study of the die filling stage in powder metallurgy , 2005 .

[8]  Guy T. Houlsby,et al.  The flow of granular materials—I: Discharge rates from hoppers , 1982 .

[9]  H. Riedel,et al.  Simulations of the influence of rearrangement during sintering , 2007 .

[10]  Hans J. Herrmann,et al.  Angle of repose and angle of marginal stability: molecular dynamics of granular particles , 1993 .

[11]  D. C. Rapaport,et al.  Molecular dynamics studies of granular flow through an aperture , 1997 .

[12]  G. D. Scott,et al.  Packing of Spheres: Packing of Equal Spheres , 1960, Nature.

[13]  R. Bordia,et al.  Influence of adhesion and friction on the geometry of packings of spherical particles. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[14]  P. A. Langston,et al.  Distinct element simulation of interstitial air effects in axially symmetric granular flows in hoppers , 1996 .

[15]  J. Tengzelius,et al.  Die Filling Characteristics of Metal Powders , 1986 .

[16]  Aibing Yu,et al.  Prediction of hopper discharge rates of binary granular mixtures , 1998 .

[17]  I. C. Sinka,et al.  Characterisation of the flow behaviour of pharmaceutical powders using a model die–shoe filling system , 2007 .

[18]  H. Herrmann,et al.  On the angles of dry granular heaps , 1997 .

[19]  R. M. Nedderman,et al.  The discharge of fine sands from conical hoppers , 1995 .

[20]  Paul W. Cleary,et al.  DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge , 2002 .

[21]  I. C. Sinka,et al.  Measurement of the flow properties of powders with special reference to die fill. , 2004, International journal of pharmaceutics.

[22]  R. Nedderman.  Statics and Kinematics of Granular Materials: Euler's equation and rates of strain , 1992 .

[23]  Peter K. Haff,et al.  Computer simulation of the mechanical sorting of grains , 1986 .

[24]  A. Yu,et al.  Rolling friction in the dynamic simulation of sandpile formation , 1999 .

[25]  G. Grest,et al.  Granular flow down an inclined plane: Bagnold scaling and rheology. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[26]  A. Apostolopoulos,et al.  Ceramic comparison of filling behaviour of metallic, ceramic, hardmetal and magnetic powders , 2005 .

[27]  P Zulli,et al.  Numerical investigation of the angle of repose of monosized spheres. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[28]  J. H. Tweed,et al.  Modelling of Powder Die Compaction , 2007 .

[29]  Herrmann,et al.  Convection cells in vibrating granular media. , 1992, Physical review letters.

[30]  Luiza Dihoru,et al.  The flow of powder into simple and stepped dies , 2003 .

[31]  Herrmann,et al.  Shape of the Tail of a Two-Dimensional Sandpile. , 1996, Physical review letters.

[32]  Chuan-Yu Wu,et al.  Numerical and experimental investigations of the flow of powder into a confined space , 2006 .

[33]  P. Langston,et al.  Continuous potential discrete particle simulations of stress and velocity fields in hoppers: transition from fluid to granular flow , 1994 .

[34]  Harald Kruggel-Emden,et al.  Review and extension of normal force models for the Discrete Element Method , 2007 .

[35]  O. Guillon,et al.  Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments , 2007 .

[36]  Christopher E. Brennen,et al.  Computer simulation of granular shear flows , 1985, Journal of Fluid Mechanics.

[37]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .

[38]  Stefan Luding,et al.  About contact force-laws for cohesive frictional materials in 2D and 3D , 2006 .

[39]  Gang Sun,et al.  Relationship between the flow rate and the packing fraction in the choke area of the two-dimensional granular flow. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[40]  J. Banavar,et al.  Computer Simulation of Liquids , 1988 .

[41]  G. Bocchini,et al.  Influence of Small Die Width on Filling and Compacting Densities , 1987 .

[42]  Gary S Grest,et al.  Geometry of frictionless and frictional sphere packings. , 2002, Physical review. E, Statistical, nonlinear, and soft matter physics.

[43]  Igor P. Omelyan.  On the numerical integration of motion for rigid polyatomics: the modified quaternion approach , 1998 .

[44]  D. Wolf,et al.  Force Schemes in Simulations of Granular Materials , 1996 .

[45]  Gerald H. Ristow.  Outflow rate and wall stress for two-dimensional hoppers , 1997 .

[46]  Chuan-Yu Wu,et al.  Die Filling and Powder Transfer , 2003 .

[47]  R. L. Braun,et al.  Stress calculations for assemblies of inelastic speres in uniform shear , 1986 .

[48]  K. Kendall,et al.  Surface energy and the contact of elastic solids , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[49]  P. A. Langston,et al.  Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions , 1995 .

[50]  Volkhard Buchholtz,et al.  Numerical investigations of the evolution of sandpiles , 1994 .

[51]  A. Yu,et al.  Discrete particle simulation of particulate systems: Theoretical developments , 2007 .

[52]  H. V. van Gerner,et al.  Storage and discharge of a granular fluid. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[53]  Bjarne Bergquist,et al.  Large undercooling, rapid solidification, and nucleation mechanism during multistage atomisation , 2002 .

[54]  J. van de Velde,et al.  The flow of granular solids through orifices , 1961 .

[55]  E. Liniger,et al.  Random loose packings of uniform spheres and the dilatancy onset. , 1990, Physical review letters.

[56]  A Samadani,et al.  Angle of repose and segregation in cohesive granular matter. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[57]  Chuan-Yu Wu,et al.  Experimental and numerical study of die filling, powder transfer and die compaction , 2005 .