Dynamic Analysis of Rectilinear Motion of a Self-Propelling Disk With Unbalance Masses

This paper investigates the dynamics of a rolling disk with three unbalance masses that can slide along radial spokes equispaced in angular orientation. The objective is to design trajectories for the masses that satisfy physical constraints and enable the disk to accelerate or move with constant velocity. The disk is designed to remain vertically upright and is constrained to move along a straight line. We design trajectories for constant acceleration, first using a static model, and then through detailed analysis using a dynamic model. The analysis based on the dynamic model considers two separate cases; one where the potential energy of the system is conserved, and the other where it continually varies. Whereas trajectories conserving potential energy are quite similar to those obtained from the static model, the variable potential energy trajectories are the most general. A number of observations related to the system center-of-mass are made with respect to both trajectories. Following the strategy for constant acceleration maneuvers, we give a simple approach to tracking an acceleration profile and provide some simulation results. @DOI: 10.1115/1.1344903#

[1]  D. T. Greenwood Principles of dynamics , 1965 .

[2]  Donald E. Kirk,et al.  Optimal control theory : an introduction , 1970 .

[3]  Atsushi Koshiyama,et al.  Design and Control of an All-Direction Steering Type Mobile Robot , 1993, Int. J. Robotics Res..

[4]  N. H. Getz Internal equilibrium control of a bicycle , 1995, Proceedings of 1995 34th IEEE Conference on Decision and Control.

[5]  N. McClamroch,et al.  Stabilization and asymptotic path tracking of a rolling disk , 1995, Proceedings of 1995 34th IEEE Conference on Decision and Control.

[6]  Yan Wang,et al.  Motion control of a spherical mobile robot , 1996, Proceedings of 4th IEEE International Workshop on Advanced Motion Control - AMC '96 - MIE.

[7]  On the motion of a disc rolling on a horizontal plane: Path controllability and feedback control , 1996 .

[8]  Yangsheng Xu,et al.  A single-wheel, gyroscopically stabilized robot , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[9]  Y. Yavin Inclination control of the motion of a rolling disk by using a rotor , 1997 .

[10]  Yangsheng Xu,et al.  A single wheel, gyroscopically stabilized robot , 1997, IEEE Robotics Autom. Mag..

[11]  Antonio Bicchi,et al.  Introducing the "SPHERICLE": an experimental testbed for research and teaching in nonholonomy , 1997, Proceedings of International Conference on Robotics and Automation.

[12]  Y. Yavin,et al.  Stabilization and control of the motion of a rolling disk by using two rotors fixed along its axis , 1999 .

[13]  Mark A. Minor,et al.  A simple motion planner for a spherical mobile robot , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).