Hydrothermal and energy-saving performances in a mini-channel heat sink under different wire coil inserts induced swirling flow

[1]  Jinxin Zhang,et al.  Experimental investigation on the effects of swirling flow on flow boiling heat transfer and instability in a minichannel heat sink , 2022, Applied Thermal Engineering.

[2]  Yanjun Chen,et al.  Electrical field combined nanofluid to enhance the thermal performance of vertical open microgrooves heat sink , 2022, Applied Thermal Engineering.

[3]  Jinxin Zhang,et al.  Design of a mini-channel heat sink for high-heat-flux electronic devices , 2022, Applied Thermal Engineering.

[4]  H. Safikhani,et al.  Multi objective optimization of TiO2/water nanofluid flow within a heat exchanger enhanced with loose-fit delta-wing twisted tape inserts , 2022, International Journal of Thermal Sciences.

[5]  S. Hossainpour,et al.  Improving the hydrothermal characteristics of wavy microchannel heat sink by modification of wavelength and wave amplitude , 2022, International Communications in Heat and Mass Transfer.

[6]  A. Rahbari,et al.  Effect of pitch distance of rotational twisted tape on the heat transfer and fluid flow characteristics , 2021 .

[7]  J. Ji,et al.  Experiment on critical heat flux of subcooled flow boiling in compound heat transfer tubes , 2021, Applied Thermal Engineering.

[8]  Jung Kyung Kim,et al.  Convective heat transfer and friction factor characteristics of helical strip inserted annuli at turbulent flow , 2021 .

[9]  V. Ozceyhan,et al.  Thermohydraulic performance evaluation for horizontal tube by using combination of modified coiled wire inserts and graphene nanoplatelet-water nanouids , 2021 .

[10]  Liangbi Wang,et al.  Convective heat transfer enhancement mechanisms in circular tube inserted with a type of twined coil , 2021 .

[11]  Kashif Nawaz,et al.  Review of heat transfer enhancement techniques for single phase flows , 2021 .

[12]  A. I. Ramadhan,et al.  Thermal hydraulic performance for hybrid composition ratio of TiO2–SiO2 nanofluids in a tube with wire coil inserts , 2021, Case Studies in Thermal Engineering.

[13]  U. C. Arunachala,et al.  Intensification of thermo-hydraulic and exergetic performance by wire matrix and wavy tape: An experimental study , 2021 .

[14]  D. Toghraie,et al.  The effect of magnetic field on the twisted porous ribs with various porous layers and pitches: The first and second laws of thermodynamics study with two-phase approach , 2020 .

[15]  N. Abu‐Hamdeh,et al.  Investigation of the effect of the finned coiled wire insert on the heat transfer intensification of circular tube: Energy and exergy analysis , 2020 .

[16]  Zuqiang Huang,et al.  Experimental investigation of laminar flow and heat transfer characteristics in square minichannels with twisted tapes , 2020 .

[17]  Liangbi Wang,et al.  The mechanism of laminar convective heat transfer enhancement enforced by twisting of elliptical tube , 2020 .

[18]  Jian Wu,et al.  Numerical investigation of laminar flow and heat transfer in a liquid metal cooled mini-channel heat sink , 2020 .

[19]  Maziar Shafaee,et al.  Flow pattern maps, pressure drop and performance assessment of horizontal tubes with coiled wire inserts during condensation of R-600a , 2020 .

[20]  Zhichun Liu,et al.  Numerical investigation of heat transfer and flow characteristics of laminar flow in a tube with center-tapered wavy-tape insert , 2019, Applied Thermal Engineering.

[21]  Chang-qi Yan,et al.  Numerical analysis on enhanced performance of new coaxial cross twisted tapes for laminar convective heat transfer , 2018, International Journal of Heat and Mass Transfer.

[22]  V. Ozceyhan,et al.  Entropy generation analysis for a circular tube with equilateral triangle cross sectioned coiled-wire inserts , 2017 .

[23]  B. T. Tan,et al.  Performance evaluation of twisted-tape insert induced swirl flow in a laminar thermally developing heat exchanger , 2017 .

[24]  Li Haiyan,et al.  Numerical investigation on laminar flow and heat transfer in rectangular microchannel heat sink with wire coil inserts , 2017 .

[25]  J. Zhao,et al.  A novel wavy-tape insert configuration for pipe heat transfer augmentation , 2016 .

[26]  M. A. Wahid,et al.  Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts , 2016 .

[27]  W. Liu,et al.  Numerical studies on thermo-hydraulic characteristics of laminar flow in a heat exchanger tube fitted with vortex rods , 2016 .

[28]  Mohammad Ali Akhavan-Behabadi,et al.  Pressure drop and heat transfer augmentation due to coiled wire inserts during laminar flow of oil inside a horizontal tube , 2010 .

[29]  Jian-Fei Zhang,et al.  A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving , 2009 .

[30]  A. Viedma,et al.  Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers , 2005 .

[31]  Jinxin Zhang,et al.  Combined influence of rectangular wire coil and twisted tape on flow and heat transfer characteristics in square mini-channels , 2023, International Journal of Heat and Mass Transfer.

[32]  V. Ozceyhan,et al.  Heat transfer augmentation in a tube with conical wire coils using a mixture of ethylene glycol/water as a fluid , 2022 .

[33]  Dongwei Zhang,et al.  Investigation on the heat transfer and energy-saving performance of microchannel with cavities and extended surface , 2022, International Journal of Heat and Mass Transfer.

[34]  J. Alvarado,et al.  Thermal performance of helical coils with reversed loops and wire coil inserts , 2020 .

[35]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .