论文信息 - 2D potential measurements by applying automatic beam adjustment system to heavy ion beam probe diagnostic on the Large Helical Device.

2D potential measurements by applying automatic beam adjustment system to heavy ion beam probe diagnostic on the Large Helical Device.

Two-dimensional potential profiles in the Large Helical Device (LHD) were measured with heavy ion beam probe (HIBP). To measure the two-dimensional profile, the probe beam energy has to be changed. However, this task is not easy, because the beam transport line of LHD-HIBP system is very long (∼20 m), and the required beam adjustment consumes much time. To reduce the probe beam energy adjustment time, an automatic beam adjustment system has been developed. Using this system, required time to change the probe beam energy is dramatically reduced, such that two-dimensional potential profiles were able to be successfully measured with HIBP by changing the probe beam energy shot to shot.

[1] K. Kawahata,et al. Present Status in the Development of 6 MeV Heavy Ion Beam Probe on LHD , 2007 .

[2] M. Yokota,et al. 6 MeV heavy ion beam probe on the Large Helical Device , 2006 .

[3] Y. Hamada,et al. Observation of the fast potential change at L-H transition by a heavy-ion-beam probe on JFT-2M. , 2002, Physical review letters.

[4] H. Sanuki,et al. ELECTRON THERMAL TRANSPORT BARRIER AND DENSITY FLUCTUATION REDUCTION IN A TOROIDAL HELICAL PLASMA , 1999 .

[5] K. H. Burrell,et al. Effects of E×B velocity shear and magnetic shear on turbulence and transport in magnetic confinement devices , 1997 .

[6] T. P. Crowley,et al. Rensselaer heavy ion beam probe diagnostic methods and techniques , 1994 .

[7] C. D. Beidler,et al. Neoclassical Transport Scalings Determined from a General Solution of the Ripple-Averaged Kinetic Equation (GSRAKE) , 1995 .

[8] J. Marshall,et al. PLASMA DENSITY MEASUREMENT BY ION-BEAM PROBING. , 1969 .