The design and fabrication of planar multiband metallodielectric frequency selective surfaces for infrared applications
暂无分享,去创建一个
Ling Li | D. Werner | T. Mayer | J. Bossard | J.A. Smith | Y. Tang | R. P. Drupp | Ling Li | Y. Tang | Yanning Tang | Jacob A. Smith | R. Drupp
[1] R Ulrich,et al. Interference filters for the far infrared. , 1968, Applied optics.
[2] K D Möller,et al. Far-infrared bandpass filters from cross-shaped grids. , 1981, Applied optics.
[3] Charles M. Rhoads,et al. Mid-infrared filters using conducting elements. , 1982, Applied optics.
[4] R. C. Tiberio,et al. Infrared mesh filters fabricated by electron‐beam lithography , 1985 .
[5] Kent J. Kogler,et al. Infrared filters fabricated from submicron loop antenna arrays. , 1988, Applied optics.
[6] David E. Goldberg,et al. Genetic Algorithms in Search Optimization and Machine Learning , 1988 .
[7] R. Mittra,et al. Techniques for analyzing frequency selective surfaces-a review , 1988, Proc. IEEE.
[8] R. Mittra,et al. On the analysis of frequency-selective surfaces using subdomain basis functions , 1990 .
[9] A. Ishimaru. Electromagnetic Wave Propagation, Radiation, and Scattering , 1990 .
[10] Hao Wang,et al. Introduction to Genetic Algorithms in Electromagnetics , 1995 .
[11] Eric Michielssen,et al. Genetic algorithm optimization applied to electromagnetics: a review , 1997 .
[12] V. Rahmat-Samii,et al. Genetic algorithms in engineering electromagnetics , 1997 .
[13] Kai-Ming Ho,et al. Infrared filters using metallic photonic band gap structures on flexible substrates , 1997 .
[14] Simon Verghese,et al. Three-dimensional metallodielectric photonic crystals exhibiting resonant infrared stop bands , 1997 .
[15] M. Majewski,et al. Optical properties of metallic films for vertical-cavity optoelectronic devices. , 1998, Applied optics.
[16] Z. M. Zhang,et al. Infrared Refractive Index and Extinction Coefficient of Polyimide Films , 1998 .
[17] Yahya Rahmat-Samii,et al. Electromagnetic Optimization by Genetic Algorithms , 1999 .
[18] Dual-band infrared metallodielectric photonic crystal filters , 2000 .
[19] G D Boreman,et al. Refractive-index and element-spacing effects on the spectral behavior of infrared frequency-selective surfaces. , 2000, Applied optics.
[20] Ben A. Munk,et al. Frequency Selective Surfaces: Theory and Design , 2000 .
[21] G. Boreman,et al. Comparison of infrared frequency selective surfaces fabricated by direct-write electron-beam and bilayer nanoimprint lithographies , 2000 .
[22] G. Boreman,et al. Modeling parameters for the spectral behavior of infrared frequency-selective surfaces. , 2001, Applied optics.
[23] Infrared frequency selective surfaces fabricated using optical lithography and phase-shift masks , 2001 .
[24] R. Mittra,et al. Application of a microgenetic algorithm (MGA) to the design of broadband microwave absorbers using multiple frequency selective surface screens buried in dielectrics , 2002 .
[25] George M. Whitesides,et al. Fabrication of frequency-selective surfaces using microlens projection photolithography , 2002 .
[26] G. Manara,et al. Synthesis of artificial magnetic conductors by using multilayered frequency selective surfaces , 2002, IEEE Antennas and Wireless Propagation Letters.
[27] D. Werner,et al. A genetic algorithm approach to the design of ultra‐thin electromagnetic bandgap absorbers , 2003 .
[28] D. Werner,et al. An overview of fractal antenna engineering research , 2003 .
[29] Y. H. Chen,et al. Infrared passbands from fractal slit patterns on a metal plate , 2003 .
[30] R. Marhefka,et al. Ohmic loss in frequency-selective surfaces , 2003 .
[31] Milton Rebbert,et al. Designer infrared filters using stacked metal lattices , 2003 .
[32] Douglas H. Werner,et al. Genetically engineered multiband high‐impedance frequency selective surfaces , 2003 .
[33] D. Werner,et al. Dual-band infrared single-layer metallodielectric photonic crystals , 2004 .
[34] Herbert Hein,et al. Thick capacitive meshes on polyimide substrates , 2004 .
[35] John L. Volakis,et al. Frequency‐selective surface based bandpass filters in the near‐infrared region , 2004 .
[36] D. M. Depoy,et al. Frequency selective surfaces as near-infrared electromagnetic filters for thermophotovoltaic spectral control , 2004 .
[37] H. Shigesawa,et al. Multiband single-layer frequency selective surface designed by combination of genetic algorithm and geometry-refinement technique , 2004, IEEE Transactions on Antennas and Propagation.
[39] G. Manara,et al. Design of waveguide filters by using genetically optimized frequency selective surfaces , 2005, IEEE Microwave and Wireless Components Letters.
[40] B. Monacelli,et al. Infrared frequency selective surface based on circuit-analog square loop design , 2005, IEEE Transactions on Antennas and Propagation.
[41] D.H. Werner,et al. A novel design methodology for reconfigurable frequency selective surfaces using genetic algorithms , 2005, IEEE Transactions on Antennas and Propagation.
[42] D. Werner,et al. The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces , 2005, IEEE Transactions on Antennas and Propagation.
[43] Chang Wook Ahn,et al. On the practical genetic algorithms , 2005, GECCO '05.
[44] Theresa S. Mayer,et al. Single-layer multiband infrared metallodielectric photonic crystals designed by genetic algorithm optimization , 2005 .