A Numerical Technique for Computing Effective Thermal Conductivity of Fluid–Particle Mixtures

Periodic arrays of particles, foams, and other structures impregnated with a static fluid play an important role in heat transfer enhancement. In this article, we develop a numerical method for computing conduction heat transfer in periodic beds by exploiting the periodicity of heat flux and the resulting linear variation of mean temperature. The numerical technique is developed within the framework of an unstructured finite-volume scheme in order to enable the computation of effective thermal conductivity for complex fluid-particle arrangements. The method is applied to the computation of effective thermal conductivity of ordered as well as random beds of spheres and rods. The effects of varying surface area, aspect ratio, volume fraction, orientation, and distribution are studied for various solid-to-fluid conductivity ratios. Unlike classical theories which predict only a dependence on volume fraction, these direct simulations show that aspect ratio, distribution, and alignment of particles have an important influence on the effective thermal conductivity of the bed.

[1]  J. Murthy,et al.  A PRESSURE-BASED METHOD FOR UNSTRUCTURED MESHES , 1997 .

[2]  A. Zients.  Andy , 2003 .

[3]  Yiannis Ventikos,et al.  Simulations of flow through open cell metal foams using an idealized periodic cell structure , 2003 .

[4]  William W. Yu,et al.  ANOMALOUSLY INCREASED EFFECTIVE THERMAL CONDUCTIVITIES OF ETHYLENE GLYCOL-BASED NANOFLUIDS CONTAINING COPPER NANOPARTICLES , 2001 .

[5]  Q. Xue.  Model for effective thermal conductivity of nanofluids , 2003 .

[6]  E. Sparrow,et al.  Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area , 1977 .

[7]  D. Jeffrey,et al.  Conduction through a random suspension of spheres , 1973, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[8]  Robert H. Davis.  The effective thermal conductivity of a composite material with spherical inclusions , 1986 .

[9]  O. K. Crosser,et al.  Thermal Conductivity of Heterogeneous Two-Component Systems , 1962 .

[10]  J. Murthy,et al.  Periodic flow and heat transfer using unstructured meshes , 1997 .

[11]  Wenhua Yu,et al.  The Role of Interfacial Layers in the Enhanced Thermal Conductivity of Nanofluids: A Renovated Maxwell Model , 2003 .

[12]  Cristina H. Amon,et al.  Transient thermal management of temperature fluctuations during time varying workloads on portable electronics , 1999 .

[13]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[14]  M. Radosavljevic,et al.  Carbon nanotube composites for thermal management , 2002, cond-mat/0205418.

[15]  Greek Symbols.  Transient Thermal Management of Temperature Fluctuations During Time Varying Workloads on Portable Electronics , 1999 .

[16]  R. Mahajan,et al.  The Effective Thermal Conductivity of High Porosity Fibrous Metal Foams , 1999 .

[17]  George S. Springer,et al.  Thermal Conductivities of Unidirectional Materials , 1967 .

[18]  J. Eastman,et al.  Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles , 1999 .

[19]  D. Poulikakos,et al.  On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam , 2001 .

[20]  H. Masuda,et al.  ALTERATION OF THERMAL CONDUCTIVITY AND VISCOSITY OF LIQUID BY DISPERSING ULTRA-FINE PARTICLES. DISPERSION OF AL2O3, SIO2 AND TIO2 ULTRA-FINE PARTICLES , 1993 .

[21]  Cristina H. Amon,et al.  PCM thermal control unit for portable electronic devices: experimental and numerical studies , 2003 .

[22]  S. Phillpot,et al.  Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids) , 2002 .

[23]  E. Grulke,et al.  Anomalous thermal conductivity enhancement in nanotube suspensions , 2001 .