Microstructural investigations of pure nickel exposed to KCl induced high temperature corrosion

Abstract Oxidation of 99·99% pure nickel was studied with and without 0·10 mg cm−2 KCl(s) in an environment containing 5 vol.-%O2, 40 vol.-%H2O and 55 vol.-%N2 at 600°C for up to 168 h. Oxide microstructure was investigated by X-ray diffraction (XRD), focused ion beam (FIB), broad ion beam (BIB) and SEM/EDX. Oxidised nickel shows an approximately parabolic oxide growth rate. The oxide scale is dense with some pores at the oxide/metal interface. Adding small amounts of KCl does not result in a faster corrosion rate of nickel. However, the surface morphology changes and small oxide crusts were observed in the vicinity of former KCl particles. This is proposed to be the result of a NiCl2–KCl eutectic on top of the oxide scale formed above 514°C. The oxide scale formed in the presence of KCl contains more and differently distributed voids than the scale formed without KCl.

[1]  J. Svensson,et al.  An ESEM in situ investigation of initial stages of the KCl induced high temperature corrosion of a Fe–2.25Cr–1Mo steel at 400 °C , 2011 .

[2]  J. Ågren,et al.  An ESEM in situ investigation of the influence of H2O on iron oxidation at 500 C , 2009 .

[3]  J. Svensson,et al.  Microstructural investigation of the KCl-induced corrosion of the austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C , 2009 .

[4]  J. Svensson,et al.  The Influence of KCl on the Corrosion of an Austenitic Stainless Steel (304L) in Oxidizing Humid Conditions at 600 °C: A Microstructural Study , 2009 .

[5]  M. Ueda,et al.  Quantitative Prediction of Voids Formation in a Growing Nickel Oxide Scale at 1373 K , 2007 .

[6]  Y. Niu,et al.  High temperature interaction of Al/Si-modified Fe-Cr alloys with KCl , 2007 .

[7]  J. Svensson,et al.  The Effect of Traces of SO2 on Iron Oxidation: A Microstructural Study , 2007 .

[8]  S. Cha,et al.  Local reactions of KCl particles with iron, nickel and chromium surfaces , 2006 .

[9]  Y. S. Li,et al.  Internal Oxidation of Fe–Al Alloys in a KCl-Air Atmosphere at 650°C , 2004 .

[10]  R. Chen,et al.  Review of the High-Temperature Oxidation of Iron and Carbon Steels in Air or Oxygen , 2003 .

[11]  M. Mcnallan,et al.  Ignition of nickel in environments containing oxygen and chlorine , 1987 .

[12]  Y. Shinata.  Accelerated oxidation rate of chromium induced by sodium chloride , 1987 .

[13]  K. Hashimoto,et al.  The corrosion behaviour of iron in hydrogen chloride gas and gas mixtures of hydrogen chloride and oxygen at high temperatures , 1981 .