Research on Automatic Balance Control of Active Magnetic Bearing-Rigid Rotor System

In this paper, in order to solve the problem of unbalance vibration of rigid rotor system supported by the active magnetic bearing (AMB), automatic balancing method is applied to suppress the unbalance vibration of the rotor system. Firstly, considering the dynamic and static imbalance of the rotor, the detailed dynamic equations of the AMB-rigid rotor system are established according to Newton’s second law. Then, in order to rotate the rotor around the inertia axis, the notch filter with phase compensation is used to eliminate the synchronous control current. Finally, the variable-step fourth-order Runge–Kutta iteration method is used to solve the unbalanced vibration response of the rotor system in MATLAB simulation. The effects of the rotational speed and phase compensation angle on the unbalanced vibration control are analysed in detail. It is found that the synchronous control currents would increase rapidly with the increase of rotational speed if the unbalance vibration cannot be controlled. When the notch filter with phase shift is used to balance the rotor system automatically, the control current is reduced significantly. It avoids the saturation of the power amplifier and reduces the vibration response of the rotor system. The rotor system can be stabilized over the entire operating speed range by adjusting the compensation phase of the notch filter. The method in the paper is easy to implement, and the research result can provide theoretical support for the unbalance vibration control of AMB-rotor systems.

[1]  Juan Shi,et al.  Synchronous disturbance attenuation in magnetic bearing systems using adaptive compensating signals , 2004 .

[2]  Dennis S. Bernstein,et al.  Adaptive autocentering control for an active magnetic bearing supporting a rotor with unknown mass imbalance , 1996, IEEE Trans. Control. Syst. Technol..

[3]  Xiangbo Xu,et al.  Active suppression of imbalance vibration in the magnetically suspended control moment gyro , 2015 .

[4]  Yang Yong-feng,et al.  Dynamic characteristics of cracked uncertain hollow-shaft , 2019, Mechanical Systems and Signal Processing.

[5]  Gangbing Song,et al.  Adaptive compensation of sensor runout and mass unbalance in magnetic bearing systems , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[6]  Tang Ming,et al.  A Uniform Control Method for Imbalance Compensation and Automation Balancing in Active Magnetic Bearing-Rotor Systems , 2012 .

[7]  Shiqiang Zheng,et al.  Suppression of imbalance vibration for AMBs controlled driveline system using double-loop structure , 2015 .

[8]  Wilfried Hofmann,et al.  Improving Operational Performance of Active Magnetic Bearings Using Kalman Filter and State Feedback Control , 2012, IEEE Transactions on Industrial Electronics.

[9]  Joga Dharma Setiawan,et al.  Synchronous disturbance compensation in active magnetic bearings using bias current excitation , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[10]  G. Schweitzer,et al.  Magnetic bearings : theory, design, and application to rotating machinery , 2009 .

[11]  Jiancheng Fang,et al.  Static mass imbalance identification and vibration control for rotor of magnetically suspended control moment gyro with active-passive magnetic bearings , 2016 .

[12]  Lih-Chang Lin,et al.  Fuzzy dynamic output feedback control with adaptive rotor imbalance compensation for magnetic bearing systems , 2004, IEEE Trans. Syst. Man Cybern. Part B.

[13]  T. Ishimatsu,et al.  Unbalance compensation of magnetic bearings , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[14]  E. Vahedforough,et al.  Estimation and Rejection of Unknown Sinusoidal Disturbances Using a Generalized Adaptive Forced Balancing Method , 2007, 2007 American Control Conference.

[15]  Chen Yi-qing.  Research on Adaptive Filter Control of Imbalance Vibration , 2007 .

[16]  Zhu Changsheng,et al.  Unbalance Compensation by Recursive Seeking Unbalance Mass Position in Active Magnetic Bearing-Rotor System , 2015, IEEE Transactions on Industrial Electronics.

[17]  Raoul Herzog,et al.  Unbalance compensation using generalized notch filters in the multivariable feedback of magnetic bearings , 1996, IEEE Trans. Control. Syst. Technol..

[18]  K. Nonami,et al.  Adaptive unbalance vibration control of magnetic bearing system using frequency estimation for multiple periodic disturbances with noise , 1999, Proceedings of the 1999 IEEE International Conference on Control Applications (Cat. No.99CH36328).

[19]  W. Marsden.  I and J , 2012 .

[20]  B. Shafai,et al.  Magnetic bearing control systems and adaptive forced balancing , 1994, IEEE Control Systems.

[21]  Hongrui Cao,et al.  Mechanical model development of rolling bearing-rotor systems: A review , 2018 .

[22]  Xiaoyou Zhang,et al.  Compensation of rotor imbalance for precision rotation of a planar magnetic bearing rotor , 2003 .