Optimization of surface engraving quality with ultrafast lasers

Large area engraving is achieved by moving a focused femtosecond beam on the sample surface. Of course, the process parameters are the moving speed (moving beam or moving sample or both) and the laser repetition rate. Surface engraving is obtained by multiple linear pass shifted along the y-axis perpendicular to the moving x-axis. The resulting surface shape is thus highly dependent on the deviation Δy between two successive shifted passes. Being able to predict and optimize the process in terms of the depth and surface quality is a key advantage. In this work, we show that experimentally engraved surface shapes can be numerically estimated using a simple ablation model. Only two parameters are needed to have a satisfactory description of the laser matter interaction for a given material. We combine the description of the engraving process with the laser matter interaction model to calculate the surface shape after laser scanning.

[1]  B. Jaeggi,et al.  Factors controlling the incubation in the application of ps laser pulses on copper and iron surfaces , 2013, Photonics West - Lasers and Applications in Science and Engineering.

[2]  Boris N. Chichkov,et al.  Ablation of metals by ultrashort laser pulses , 1997 .

[3]  Yoann Zaouter,et al.  Ablation efficiency of high average power ultrafast laser , 2015 .

[4]  B. Jaeggi,et al.  From fs to Sub-ns: Dependence of the Material Removal Rate on the Pulse Duration for Metals , 2013 .

[5]  John J. Lopez.  Parameters of Influence in Surface Ablation and Texturing of Metals Using High-power , 2015 .

[6]  Beat Neuenschwander,et al.  Processing of metals and dielectric materials with ps-laserpulses: results, strategies, limitations and needs , 2010, LASE.

[7]  B. Jaeggi,et al.  Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs , 2012, LASE.

[8]  Valerio Romano,et al.  Processing of metals with ps-laser pulses in the range between 10ps and 100ps , 2011, LASE.

[9]  Boris N. Chichkov,et al.  Short-pulse laser ablation of solid targets , 1996 .

[10]  E. Mottay,et al.  Engineering model for ultrafast laser microprocessing , 2016, SPIE LASE.

[11]  B. Jaeggi,et al.  Laser surface structuring with 100 W of average power and sub-ps pulses , 2016 .

[12]  M. Gedvilas,et al.  Use of High Repetition Rate and High Power Lasers in Microfabrication: How to Keep the Efficiency High? , 2009 .

[13]  P. M. Lugarà,et al.  Role of heat accumulation on the incubation effect in multi-shot laser ablation of stainless steel at high repetition rates. , 2014, Optics express.

[14]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .